About the Kenwood KDC-C669
Tired of fumbling with CD jewel cases while driving down the road? Add the KDC-C669 6-disc CD changer to your Kenwood changer-controlling CD, MD, or cassette receiver, and put hours and hours of tunes at your fingertips!
An oil-damped suspension system virtually eliminates skipping, while Kenwood's Quad 1-bit Digital-to-Analog Converter generates superb sound quality. As an added benefit, the KDC-C669 is CD-R and CD-RW compatible, and will transmit CD Text information to a compatible Kenwood receiver.
Product highlights:
- plays CDs, CD-Rs and CD-RWs
- oil-damped suspension
- Integrated Quad 1-Bit Digital-to-Analog Converter
- disc naming up to 100 discs with compatible Kenwood receiver
- CD Text (with a compatible Kenwood receiver)
- mounts at 0°, 45°, or 90°
- CD frequency response 5-20,000 Hz
- signal-to-noise ratio 100 dB
- 16-foot connection cable included
- dimensions:10-1/8"W x 2-9/16"H x 7-3/16"D
- warranty: 1 year
- MFR # KDC-C669
What's in the box:
Kenwood KDC-C669 owner's manual
- Silver 6-Disc CD changer with 3 transport screws and attached transport screw note
- One KCA-M612 6-disc magazine
- 16' Changer control cable (13-pin male connector on each end)
- 2 Plastic mounting brackets
- 4 Self-tapping screws
- 4 Machine screws (each with a flat washer and a lock washer)
- Instruction Manual
- Warranty Card
- Changer Control Cable Caution note
Customer reviews for Kenwood KDC-C669
Loading...
Loading reviews...
Average review:
4.5 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Kenwood KDC-C669
Product Research
Features
Compatibility: This changer is compatible with Kenwood changer controllers made in 1998 and later. There is no O-N switch, so it cannot be connected to pre-1998 controllers.
Digital Optimum Servo Control (DOSC): This circuitry enables the CD changer to determine each disc's reflection rate and the modulation rate of its pits, enabling the changer to set the ideal servo gain for each disc. DOSC also adjusts servo gain and balance when it encounters vibration, scratches, dust, or fingerprints, reducing mistracking and skipping.
Precision Digital Timing (DPAC): A high-precision master clock circuit that is isolated from signal-processing circuits to eliminate interference. This ensures that digital information is processed at exactly the same rate as it was recorded, eliminating jitter (time-based errors that make music sound harsh).
Digital Filter: This unit has an 8-times oversampling digital filter, which is a circuit that removes most of the unwanted digital data from a digital audio waveform while it's still in the digital form. This allows the use of much gentler, better sounding analog filters when the digital waveform is converted back to an analog music signal.
Integrated Quad 1-Bit Digital-to-Analog Converter: Four digital-to-analog converters, two for each channel, improve playback sound quality, including musical detail and resolution. Using two converters for each channel reduces distortion by half.
Anti-Vibration Disc Transport: The disc transport mechanism uses soft butyl rubber insulators for exceptional shock resistance, along with ceramic-injected silicon oil that absorbs jarring vibrations even at extreme temperatures, reducing skipping and mistracking.
CD Compatibility: This unit will play prerecorded CDs, finalized CD-R discs, and finalized CD-RW discs.
CD Text: When playing CD Text encoded CDs, this changer will transmit the data for display on compatible Kenwood head units equipped with CD Text display capability.
Disc Naming: When used with a compatible head unit, the changer allows Disc Naming for 100 discs and up to 12 characters for each disc name.
Mounting Angles: You can install this changer at a 0-5 degree, 40-50 degree, or 85-90 degree angle. There are angle switching dials on both sides of the unit that must be set to agree with the mounting angle of the unit. Note: The supplied mounting brackets are for horizontal and vertical mounts only, relative to the surface the changer is mounted to. Mounting the changer at a 40-50 degree angle requires mounting the changer to a flat surface, angled at 40-50 degrees, using the brackets in the horizontal position.
Dimensions: The changer dimensions at each mounting angle are as follows:
Measurements (including brackets) | Horizontal Mount 0-5 degrees | Vertical Mount 85-90 degrees |
---|---|---|
Width | 11.988" | 11.992" |
Height | 2.888" | 7.454" |
Depth | 7.148" | 2.528" |
The Kenwood KDC-C669 replaces these items
Kenwood KDC-C667
- Compatible with most Kenwood receivers with changer controls
- CD-R/RW playback
- CD Text decoding with capable receivers
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...
Great product!! I installed this in my 99 Taurus with the factory radio adaptor and it sounds great. It was easy to install and I haven't experienced any problems so far. It's easy to use and was a great addition to my car!
Andy from Buffalo, NY