About the Infinity 1252w
No matter what kind of music you listen to, count on Infinity Reference Series subs to deliver the power of the bass instruments in true-to-life fashion. Infinity's Reference 1252w 12" subwoofer adds impact to your tunes with a lightweight cone that responds quickly and accurately, so you'll enjoy every hard-hitting beat.
Infinity built this sub for power and accuracy, with a large-roll rubber surround that extends and controls cone movement, along with a spider design that applies more force to the cone as it travels to its limit. Behind the scenes, the 1252w features a specially designed basket that allows plenty of cone excursion while minimizing the sub's depth.
Built-in air vents cool the sub's internal workings for excellent reliability. Dual 4-ohm voice coils give you more options for wiring, whether you're building a multi-sub setup or drawing more power out of your amp.
Note: If you are wiring this DVC sub for lower impedance, make sure that your amp is compatible. Most 2-channel car amplifiers are stable down to 2 ohms in standard mode, or 4 ohms in bridged operation. Most mono amps are stable down to 2 ohms.
Priced per speaker
Product highlights:
- 12" subwoofer with dual 4-ohm voice coils
- polypropylene woofer cone with large-roll rubber surround
- innovative basket design minimizes depth
- progressive spider design for excellent cone control
- power range: 60-300 watts RMS (150 watts per voice coil)
- peak power handling: 1,200 watts
- frequency response: 23-400 Hz
- sensitivity: 93 dB
- top-mount depth: 5-1/16"
- sealed box volume: 1.25 cu. ft.
- ported box volume: 2.00 cu. ft.
- warranty: 1 year
- MFR # 1252W
What's in the box:
- 12" woofer
- Self-adhesive foam gasket
- Instructions
- Technical Data sheet
- Warranty card
- Infinity sticker (8" x 2-1/2")
Customer reviews for Infinity 1252w
Loading...
Loading reviews...
Average review:
4.5 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Infinity 1252w
Features & specs
Features and Specs | ||
---|---|---|
Size | 12 -inch | |
Impedance (Ohms) | --- | |
Cone Material | Polypropylene | |
Surround Material | Rubber | |
Port diameter (inches) | 4 | |
Port length (inches) | 12.25 | |
Free-Air | No | |
Dual Voice Coil | Yes | |
Sensitivity |
93 dB at 2.83 volts | |
Frequency Response | 23 - 400 Hz | |
Max RMS Power Handling | 300 | |
Peak Power Handling (Watts) | 1200 | |
Top Mount Depth (inches) | 5 1/8 | |
Bottom Mount Depth (inches) | 5 11/16 | |
Cutout Diameter or Length (inches) | 11 1/8 | |
Frame Width | 12.44 | |
Frame Length | 12.44 | |
Vas (liters) | 98.64 | |
Fs (Hz) | 24.23 | |
Qts | 0.48 | |
Xmax (millimeters) | 12.5 | |
Parts Warranty | 1 Year | |
Labor Warranty | 1 Year | |
Box Requirements | ||
Ideal Sealed Box Volume (cubic feet) | 1.25 | |
Minimum Sealed Box Volume (cubic feet) | 1.25 | |
Maximum Sealed Box Volume (cubic feet) | 1.25 | |
Ideal Ported Box Volume (cubic feet) | 2 | |
Minimum Ported Box Volume (cubic feet) | 2 | |
Maximum Ported Box Volume (cubic feet) | 2 |
Product Research
Features
Enclosure Compatibility
Features
Dual Voice Coils: For increased system flexibility, the woofer has two 4 ohm voice coils. When the voice coils are wired in parallel the woofer presents a 2 ohm load. When the voice coils are wired in series the woofer presents an 8 ohm load. In addition, each coil may be connected to a different amplifier channel and each channel will see a 4 ohm load.
High-efficiency Polypropylene Woofer Cone: This lightweight and popular material is used to ensure maximum woofer efficiency. The benefit is high output with modest amplifier power.
Large-roll Rubber Surround: The large-roll rubber surround provides optimum cone-edge suspension and absorbs distortion that may travel up the cone edge, ensuring clean, tight bass.
Proprietary Basket: The unique in-board motor structure reduces the overall mounting depth, without limiting enclosure options.
Vented Polepiece: The vented polepiece provides additional cooling of the motor structure, thus increasing power handling.
Gold-plated Binding Posts: The gold-plated binding posts will accept pin connectors, spade connectors, banana plugs, and bare wire up to 10 gauge.
Note: The binding posts are positioned too far apart to accept dual banana plugs.
Enclosure Compatibility
Sealed Box Volume: Infinity recommends a sealed enclosure with an internal volume of 1.25 cu/ft. Sealed enclosures provide the most control over a woofer, will handle more power, and provide more accurate sonic reproduction, making them suitable to all types of music.
Ported Box Volume: Infinity recommends a ported enclosure with an internal volume of 2.0 cu/ft with one 4" diameter x 12.25" long port. Ported (or vented) enclosures provide better efficiency in the 40-50Hz range, and are suitable for use with small amplifiers, giving you more bass output from less power. However, this efficiency comes at the expense of sound quality at low frequencies (40Hz and below), and control.
Bandpass Box Volume: Infinity recommends a bandpass enclosure with an internal volume of 2.5 cu/ft. The enclosure has a sealed chamber volume of 1.25 cu/ft and a ported chamber volume of 1.25 cu/ft with two 4" diameter x 8" long ports. Bandpass enclosures often provide the most output available from any amplifier and subwoofer combination at the expense of sonic accuracy. If sheer SPL is desired most, a bandpass enclosure is recommended.
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...
I BOUGHT THESE FOR MY NEPHEW AND PUSHED THEM WITH AN OLDER MTX AMP, IN A 1996 CHEVY KING CAP 1500. I AM VERY HAPPY WITH THE SOUND AND BASS THEY PRODUCE , BUT I AM GOING TO LOOK FOR A DIFFERENT AMP.
CHRIS from LEESBURG,GA