Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere.
That's because we have our own in-house Product Research team — they open the box,
verify contents, check the owner's manual, and record dimensions, features and specs.
We stay on top of new products and technologies to help people make informed choices.
Overview: The Pinpoint AM20 Universal Home Theater Speaker
Wall/Ceiling Bracket is suitable for all home theater satellite speakers with
the following types of mountings - Single Threaded insert, Dual threaded
inserts, Keyhole. This bracket is a complete mounting solution for home theater
speakers and will work for both wall or ceiling applications. This speaker
bracket also comes with a steel adapter plate that allows the speaker bracket to
attach directly to a single ganged electrical box if your home is pre-wired. In
addition, the bracket comes supplied with a short-arm (45mm) and an extension-arm
place your speaker closer or further away from the wall or ceiling. The AM20
speaker bracket supports speakers up to 11 lbs. Once your speaker is mounted the
AM20 allows you to rotate your speaker 360-degrees and pivot the speaker
90-degrees for precise positioning of the speaker in your home theater system.
The AM20 comes supplied with all the necessary hardware to mount your speaker to
the bracket and the bracket to your wall or ceiling.
Note: The AM20 is sold individually as a single speaker bracket;
not in pairs. The AM20 is available in the following finishes - Black, White
Speaker Mounts: The bracket works with the following types of
satellite speakers mounts:
- Single Threaded Insert: If the speaker has a single threaded
insert, one of the supplied long screws (M5 x 25mm, M6 x 25mm, 1/4"-20 x 1", or 1/4"-20 x
1.75") can be used to attach the speaker to the bracket using the single point
- Dual Threaded Inserts: If the speaker has dual threaded inserts,
you must first attach the dual point adapter plate to the bracket, then use
the shorter screw pairs (M5 x 12mm, M6 x 12mm, or 1/4"-20 x 1") to attach
the speaker to the bracket. Screw spacing for the dual point adapter plate
is 1.9375" to 2.625"
- Keyhole Slot: If the speaker has a keyhole slot, you must first
loosely attach the M5 threaded screw-cap to the M5 x 12mm screw through the
single point adapter. The head of the screw is then inserted into the
keyhole slot and tightened to hold the speaker firmly.
Wall Mounting: The speaker bracket's metal mounting plate is first
mounted to the wall in a vertical position. There are 2 mounting holes with a
screw spacing of 1.875" to 2.625" for the supplied wood screws, plus a raised
lip for routing the speaker wire through the wall. Once the metal mounting plate
is secured to the wall, the cover plate snaps over the metal mounting plate for
a clean and professional look. In addition, the speaker bracket comes supplied
with a steel adapter plate that allows the AM20 to attach directly to a single
ganged electrical box if your home is pre-wired.
Mounting Requirement: It is recommended that the bracket be mounted to
a wall or ceiling stud. If the only location is drywall for ceiling or wall
mounting then it will necessary to use the supplied drywall anchors for a
speaker up to 5 lbs. If your speaker is over 5 lbs, it will be necessary to
obtain high quality drywall anchors like Buildex E-Z Toggle or toggler Anchor
available at most hardware stores in the US.
- Bracket With Short Arm: Width = 2.045", Height = 3.655", Depth =
- Bracket With Extension-Arm: Width = 2.045", Height = 3.655",
Depth = 5.763"