Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere.
That's because we have our own in-house Product Research team — they open the box,
verify contents, check the owner's manual, and record dimensions, features and specs.
We stay on top of new products and technologies to help people make informed choices.
Overview: The MIW-Powerkit-Pro Max In-Wall System extends
safe, protected AC power from Panamax Power Management components to a remotely
installed flat panel TV, ceiling-mounted projector, or powered subwoofer. The
inlet faceplate can be placed behind your equipment rack, and the outlet
faceplate hides discreetly behind the remotely installed component for a neat,
professional installation, without the bulky power strips or hanging power wires.
In addition to the AC power inlet and dual outlets, two Max In-wall Dual Signal
Bays are included for running your audio/video signal cables inside the wall.
All of the MIW-Powerkit-Pro faceplates are compatible with standard dual gang
15-Amp Circuits: The MIW-Powerkit-Pro system is designed only for use
with 15-Amp circuits utilizing a minimum of 14 AWG wiring.
Design: The MIW-Powerkit-Pro consists of an inlet faceplate
with a TwistLock connector and dual AC outlets for extending safe, clean AC
power from a Panamax power conditioning component to equipment remotely
installed away from the equipment rack. The AC inlet and outlets are connected
by common in-wall power wiring (i.e. Romex). A 10' AC inlet cord is provided.
There are also dual low-voltage signal bays with pass-through inserts for connecting or passing through
audio and video cables between the equipment rack to the remote component. Optional MIW Signal Line Modules (sold separately) can also be used
with the signal bays.
AC Power Cables: The included 10' AC inlet cable has a
TwistLock female plug that connects to the inlet faceplate's recessed socket.
The dual AC outlets are also recessed to reduce the plug protrusion.
Note: Even with the recessed plugs, the MIW-Powerkit-Pro is not
recommended for use with the Samsung TV Ultra Slim Wall Mount (305WMN1000).
The wall mount reduces the gap between the TV and the wall to 5/8".
Low Voltage Signal Bays: You can use the low-voltage signal bays to pass
through the component's video and audio cables. You can use the MIW Pass-Through
insert, which comes installed on the mounting bracket, and cut a hole in the
rubber grommet so that it fits tightly around the cable. Another
option is to use a Panamax MIW signal-line module (sold separately), such as the
MIW-5RCA, MIW-DATA, MIW-SVIDEO, or MIW-VGA.