About the Pioneer TS-A1605C
Get more out of your music
The woofer will add depth and impact to your favorite tunes.
Get more out of your music
Are your car's factory speakers sounding less than fresh? Pioneer built their A-Series speakers to be high-performance replacements for your old speakers, designed from the ground up to bring back the life that your music's been missing. You'll be able to enjoy the clear vocals, chunky guitar riffs, powerful drums, and distinct bass lines that have always been a part of your favorite tunes, but have remained hidden behind sub-par speakers.
Built to make your music rock
Pioneer equipped the TS-A1605C component speaker system with multilayer 6-3/4" mica-matrix woofers that stay rigid when the volume's turned up, keeping distortion to a minimum so your bass sounds clean. Install the separate 3/4" tweeters in a good spot up high in your vehicle for better stereo imaging. The system also includes 2-way outboard crossovers, a step up from the inline tweeter high-pass filters usually found in systems in this price range.
These speakers will sound great running off your factory stereo, but they'll really shine when driven by an aftermarket receiver or an external amp. Don't drive another day listening to tired-sounding tunes, when you can enjoy Pioneer sound quality with these speakers in your vehicle.
Installation note: You'll need a pair of our universal backstraps to install the tweeters in the factory locations.
Product highlights:
- component speaker system includes component speaker system includes 2 woofers, 2 tweeters, and 2 crossovers
- 6-3/4" multilayer mica-matrix woofer cone with elastic polymer surround
- 3/4" polyester fiber dome tweeter
- power range: 5-60 watts RMS (350 watts peak power)
- frequency response: 34-32,000 Hz
- sensitivity: 90 dB
- woofer top-mount depth: 2-3/16"
- woofer grilles included
- warranty: 1 year
- MFR # TS-A1605C
What's in the box:
Pioneer TS-A1605C owner's manual
- 2 Woofers
- Two 3/4" Soft-dome tweeters (with attached 10" speaker leads terminated with quick-connects)
- 2 Crossovers
- 2 Woofer grilles
- 2 Angled surface mount tweeter housings
- 2 Flush mount tweeter housings
- Two 1/2" Self-tapping screws
- Eight 1" Self-tapping screws
- 8 Speed clips
- 2 Circular adhesive backed foam pads
- Warranty information
- Template and specifications on box
Customer reviews for Pioneer TS-A1605C
Loading...
Loading reviews...
Average review:
4.5 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Pioneer TS-A1605C
Features & specs
General | ||
---|---|---|
Speaker Size | ||
Design | 2-way | |
Tweeter Design | 3/4" Dome | |
Impedance (Ohms) | 4 | |
Tweeter Composition | Polyester | |
Woofer Composition | Multilayer Mica Matrix | |
Woofer Surround | Rubber | |
Parts Warranty | 1 Year | |
Labor Warranty | 1 Year | |
Specifications | ||
Sensitivity (1W at 1 meter) | 90 | |
Sensitivity at 2.83 volts | N/A | |
Frequency Response | 34 - 32k Hz | |
Minimum RMS Wattage | 5 | |
Maximum RMS Wattage | 60 | |
Peak Power Handling (Watts) | 350 | |
Top-mount Depth (Inches) | 2 3/16 | |
Bottom-mount Depth (Inches) | N/A | |
Cutout Diameter or Length (inches) | 5 | |
Mounting Height (Inches) | 0.483 | |
Frame Width | 6.227 | |
Frame Length | 6.227 |
Product Research
Features
Woofers: The multi layer mica matrix cone was developed to provide an extra light, yet rigid diaphragm to reproduce full, rich sound.
Surrounds: For durability and a smooth response, each woofer uses a rubber (synthetic) surround.
Tweeters: The TS-A1605C system features 3/4" polyester soft-dome tweeters with magnetic fluid and Neodymium magnets for efficient, crisp, clear highs.
Tweeter Mounting: The tweeters can be flush mounted or surface mounted using the supplied housings. The surface mount housing positions the tweeters at approximately a 50° angle. Once installed the tweeters do not swivel.
Tweeter Mounting Dimensions:
Angled Surface Mount | Flush Mount | |
---|---|---|
Mounting Height | 1.633" | 0.132" |
Mounting Depth | 0.46" (screw depth) | 0.733" |
Frame Diameter | N/A | 1.891" |
Frame Depth | 1.825" | N/A |
Frame Width | 1.609" | N/A |
Cutout Diameter | N/A | 1.568" |
Crossovers: The 2-way passive crossovers have a slope of 6 dB/octave and a crossover point of 6 kHz. The attached input wires are 17" long. The attached tweeter and woofer output wires are terminated with quick-slides; the tweeter wires are 38" long and the woofer wires are 18" long. The crossover dimensions are:
- Width: 1.663"
- Height: 0.847"
- Length: 2.5"
The Pioneer TS-A1605C replaces these items
Pioneer TS-A1604C
- carbon-graphite polypropylene cone woofer
- 3/4" polyester fiber dome tweeter
- 2-50 watts RMS power range
Loading...
Loading accessories...
Customer Q&A
2 questions already asked
Loading...
Loading articles...
The first thing I must comment on is Crutchfield tech support...U guys are the best!! Bought the speakers the tech Troy recommended. Everything came out great and we have ZERO experience installing speakers. put these in a 2000 Nissan
ms from texas