About the Q-Forms Kick Panel Enclosures
Many award-winning sound-off competitors put their mid-woofers and tweeters in custom-built kick panel enclosures because that's one of the best ways to get a concert-quality stereo image. But why pay hundreds of dollars to an installer? Mount your 5-1/4" components in Q-Logic's Q-Forms, which deliver competition-quality imaging without the expensive custom installation work.
With Q-Forms, each speaker is located and angled to maximize sound quality. The theory is that the distance between your ears and each of the speakers should be equal. With your speakers in the kick panels, it's like sitting in that "sweet spot" at a concert or right between your home speakers.
All the available colors for the Q-Forms that fit your vehicle are listed here. Pick the color that matches your interior. If there is no match for your vehicle, that means Q-Forms are not available for it.
To install your component speakers in the Q-Forms, you have to cut holes for them in the Q-Form panels. Installing the Q-Form panels in your vehicle may sometimes require relocation of the parking brake pedal or other vehicle parts. Please check with us before purchasing by using the vehicle selector on our site, or calling a Sales Advisor at 1-888-955-6000 to verify fit information.
What's in the box:
Q-Forms Kick Panel Enclosures owner's manual
- 2 Black plastic Q-Forms
- 2 Black plastic grilles
- 2 Pieces of Polyfill (8" x 7" x .75")
- 2 Nylon spacers
- 3 Screws
- Installation instructions
Customer reviews for Q-Forms Kick Panel Enclosures
Loading...
Loading reviews...
Average review:
4.0 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Q-Forms Kick Panel Enclosures
Product Research
Features
Application Guide: This Q-Form kick panel fits 1995-96 Chevrolet Cavalier and Pontiac Sunfire sedans and coupes. It will not fit the convertible.
Q-Form Advantages
- Color matched to interior of your car
- Molded in one piece for factory appearance
- Speakers positioned and angled for optimum stereo staging and imaging
- Equalized path lengths reduce right/left volume bias
Installation: These Q-forms are installed using the hardware from the factory kick panels in addition to the hardware supplied with the panels. Mounting speakers requires cutting out mounting holes in the designated areas of the plastic Q-form. The tweeter can be flush or surface mounted. The tweeter on this panel is mounted low, so no interference with factory equipment (parking brake, etc) should be likely.
Note: Installing these Q-forms requires you to cut the factory scuff plates.
Installation tools required: hole saw (can also use air saw or keyhole saw), drill, screwdriver.
Estimated Installation time: 2 hours (per the manufacturer)
Speaker Fit Notes: This Q-Form will fit most 5-1/4" component speaker systems. Giving exact mounting depths is not possible since it will depend to some extent on the space available behind the factory kick panel, which can vary; however, the minimum flush mount depth is .75" for the tweeter and 2.5" for the woofer/mid bass component. According to the manufacturer, the maximum allowable speaker depth is 4". You can mount a tweeter with a maximum diameter of 2.34" and a midrange/midbass with a diameter size ranging from 3 1/2" to 5 1/4". The maximum frame width/diameter allowable for the midrange/bass driver is 6.3", so a few 6-1/2" units may fit. Our database contains information relating to cutout requirements, frame width, and mounting depth for all of our speakers, so please check with a Crutchfield sales advisor before ordering if you wish to use 6-1/2" speakers in these kick panels.
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...