Disc Playback
USB/iPod/Aux Connection
Radio Functions
Audio Section
Remote Control
Display Features

Disc Playback

MP3/WMA Playback: The KW-XR610 can play MP3 (32-320 kbps)/WMA files (32-320 kbps) that have been recorded on CD-R and CD-RW discs. The disc must be recorded in one of the following formats: ISO 9660 Level 1/Level 2, Joliet, Romeo or Windows long file. Each disc can have a total of 512 files, 255 folders, and 8 hierarchical levels. The unit also supports IDTag3 (version 1.0, 1.1, 2.2, 2.3 or 2.4) for album and artist information from MP3 or WMA files.

Fast Search: If your MP3/WMA disc contains a lot of tracks, you can fast search (+/- 10, 100, 1000) through the disc by simply turning the head unit's rotary dial to find the right song.

A to Z Search: You can search MP3/WMA tracks alphabetically in a desired folder on a disc.

Disc Resume: If you change the source, playback also stops (without ejecting the disc). Next time you select CD for the playback source, the disc will start from where it has been stopped previously.

Disc Protection: If the ejected disc is not removed within 15 seconds, the disc is automatically inserted again into the loading slot to protect it from dust; playback starts automatically.

Off Eject: The KW-XR610 allows you to eject your disc with the head unit turned off.

Mounting: For proper disc playback you must install the unit within 30-degrees of horizontal.

USB/iPod/Aux Connection

Front-Panel USB Port: The JVC KW-XR610 features a front-panel USB 2.0 type-A port (behind a sliding cover) for connection of a USB mass-storage class device. The USB port enables audio playback and control of MP3/WMA (32-320 kbps) audio files stored on a portable USB mass-storage class device (FAT 12/16/32). The KW-XR610 can recognize a total of 5,000 files and 255 folders (255 files per folder). The unit also supports IDTag3 (version 1.0, 1.1, 2.2, 2.3 or 2.4) for album and artist information from MP3/WMA files. The KW-XR610 provides Fast Search (+/- 10, 100, 1000) and Alphabetical Search (A-Z) to help you find your MP3/WMA files stored on your USB device.

iPod Direct: The JVC KW-XR610's front-panel USB port also acts as an iPod high-speed direct connection when used with the USB/iPod cable that came with your iPod. An additional iPod cable is available (469USBPOD, sold separately) so you can leave one at home and one in the car. Menu options allow iPod control from the head unit or from the iPod itself. From the head unit's front-panel controls you can search your iPod/iPhone's music by Category (Playlist/Artist/Album/Song/Genre/Composer/Audiobook). If the selected category contains a high number of tracks, you can fast search (+/-10, 100, 1000) through the music tracks in that particular category by simply turning the head unit's control dial. The KW-XR610 also supports Repeat and Random playback functions of your iPod/iPhone. Regardless of control mode, the KW-XR610 will display your iPod/iPhone's music file text. The iPod/iPhone will also charge whenever it is connected with the head unit turned on. The JVC KW-XR610 is "Made for iPod/iPhone" compatible and supports the following iPod/iPhone model features (as of November2011):

Front Panel Auxiliary Input: A front panel stereo minijack is provided to allow the connection of a portable audio source. Just connect your portable digital music player to this unit, and you can listen to the audio from the portable player through the speakers in your mobile audio system.

Optional Rear Auxiliary Input: An optional KS-U57 or KS-U58 adapter (105KSU57 or 257KSU58, both sold separately) can be connected to the J-port on the rear panel; giving you an additional auxiliary input. When either of these adapters is used, you cannot connect another external device to this port.

Radio Functions

AM/FM Tuner: The JVC KW-XR610 features a built-in AM/FM tuner with manual, seek, and preset tuning.

Preset Tuning: You can store a total of 18 FM stations presets and 6 AM station presets. The radio allows you to set your AM/FM stations manually or automatically.

Title Assignment: You can also assign names (up to eight characters) for 30 AM/FM station frequencies.

IF Filter: You can also switch the tuner's IF filter to Wide or Auto to increase/decrease the sensitivity.

US/European Tuning: You can set the built-in AM/FM tuner between US standard and European tuning spacing.

HD Radio Ready: The KW-XR610 is HD Radio ready, and requires a compatible JVC HD Radio Tuner, such as the KT-HD300.

Satellite Radio Ready: There are several options for connecting an optional XM or SIRIUS Satellite Radio receiver to this receiver:

• XM Satellite Radio: To receive XM Satellite Radio connect the optional CNP2000UCA XM Direct2 tuner and the JVC CNP-JVC1 adapter cable (package item number 700XMJVC2, sold separately).
• SIRIUS: The JVC KW-XR610 is compatible with the SiriusConnect Universal Tuner and Plug & Play Dock.
  • SiriusConnect Tuner: Connect the optional SC-C1 SiriusConnect vehicle tuner (item number 607SCC1) and the JVC KS-SRA100 SIRIUS adapter (item number 105KSRA100) - package # 700SIRJVC1, sold separately.)
  • SiriusConnect Dock: Select dock-and-play and portable SIRIUS radios can be controlled using the JVC KS-SRA100 SIRIUS adapter (item number 105KSRA100, sold separately) and the SC-VDOC1 dock (item number 607SCVDOC1, sold separately).
• Portable: A portable satellite radio receiver can be connected to the head unit via the front panel auxiliary input or a JVC auxiliary input adapter, such as the KS-U57 or KS-U58 (sold separately).

Audio Section

24 Bit D/A Converter: The JVC KW-XR610 utilizes a 24-bit digital to analog converter for superior CD sound quality.

MOSFET Amplifier: The KW-XR610 is equipped with a MOSFET amplifier. Compared to conventional power supplies, the MOSFET amplification circuit is smaller and more efficient, and it delivers increased power with less distortion and absolutely zero on/off switching noise. More power means louder and cleaner music at higher volumes because you're not pushing the limits of the amplification circuit.

CEA2006 Compliant: The power specifications for the KW-XR610 are compliant with the CEA2006 Mobile Amplifier Power Testing and Measurement standards from the Consumer Electronics Association (CEA). These standards were developed as a way to equitably compare power specs from model to model and between manufacturers. The power output specs for the KW-XR610 are as follows:

• CEA2006 Specs: 20 watts RMS x 4 channels (at 4 ohms, 20Hz-20kHz, 1% THD-N)
• Maximum Power Output: 50 watts x 4 channels (200 total watts)

Pro EQ: The KW-XR610 is equipped with JVC's Pro EQ. The integrated equalizer offers 6 preset sound modes (Flat, Natural, Dynamic, Vocal, Bass, User) suitable for the music genre of your choice. The User mode allows you to manually adjust the head unit's 3 band parametric EQ (Frequency, Level, and Q-Factor).

Loud (Loudness): This feature boosts low and high frequencies to produce a well-balanced sound at a low volume level. You can turn the Loudness feature on or off.

Amplifier Gain Control: When you are using the KW-XR610 with factory speakers (or those rated to less than 50 watts peak), the Amplifier Gain Control can limit the amount of power being sent to those speakers. When the Amp Gain Control is set to "low," the volume control ranges from 0 (minimum) to 30 (maximum). When using speakers rated higher than 50 watts peak, you can set the Amp Gain Control to "high," and the volume control will range from 0 to 50.

Source Volume: The input level of each source (other than FM) is adjustable relative to the FM radio volume, so there isn't a significant volume difference when changing sources. Each source is individually adjustable from -5 to +5.

Switchable Preamp Outputs: The KW-XR610 is equipped with two pair of 2.5V preamp outputs (Front/Rear). You can set the rear preamp outputs for connecting rear speakers (through an external amplifier) or for connecting a subwoofer (through an external amplifier). When set for rear speakers, the rear outputs operate with the unit's fader control. When set for subwoofer, the outputs are non-fading, and you can set the cutoff frequency of the low pass filter at 72Hz, 111Hz, or 157Hz. The subwoofer level can be set between 0 and 8.

Key-Touch Tone: The in-dash head unit provides an audible beep to confirm button operation. This function can be turned On or Off.

Remote Control

Wireless Remote Control: The KW-XR610 comes supplied with a wireless remote control (RM-RK50). The remote has Power, Attenuator, Sound, Source, Tracking, and Volume functions. The remote operates off of a single CR2025 3V Lithium-cell battery (included).

Steering Wheel Remote Ready: The unit also features an OEM steering wheel remote control input on the rear of the unit to allow you to keep your vehicle's radio steering wheel remote controls when used with the optional PAC SWI-JACK Steering Wheel Control Interface Adapter (127SWIJACK, sold separately); or the optional Metra ASWC Steering Wheel Control Interface Adapter (120ASWC, sold separately).

Display Features

2-DIN Chassis: The JVC KW-XR610 has a 2-DIN chassis (also known as Double DIN or size DD), and will fit in many vehicles with a large dash opening. The unit can be ISO-mounted using factory brackets, or Euro-mounted using the supplied mounting sleeve.

Variable Color LCD and Key Illumination: The JVC KW-XR610 features 29 color presets for the LCD display and button illumination. Additionally, there is a user preset, allowing you to individually adjust the intensity of Red, Green, and Blue from 0 to 31; resulting in approximately 30,000 custom color options. The chosen color can be applied to the display panel and the backlighting for all the buttons, except the Eject and Display buttons (they remain red). You can choose to use the same color for the LCD display and button illumination or use a separate color for each one. You can also select a different color for daytime and nighttime in regards to the unit's LCD display and button illumination, as well as adjust the display's contrast manually (1-8) to make display indications clear and legible.

Display/Button Illumination Dimmer: The display/button illumination dimmer can be set to Off (normal brightness at all times), On (display/button illumination is always dimmed), or Auto (display dims when 12 volts is applied to the illumination lead).

Clock Display: The head unit features a 12/24-hour clock. When you press the Display button during power off, the unit will turn on, display the clock for 5 seconds, then shut off. This can be done with the ignition on or off.