About the Infinity Reference 4022i
Install Infinity Reference 4022i 4" speakers in your car and change the way you think about long road trips and traffic jams. Reference speakers play your music boldly and cleanly, making your listening time more enjoyable.
Reference speakers feature low impedance so they extract full power from any amplifier or car stereo. Infinity makes their Plus One+ woofers 30% larger than other speakers in the same size category. As a result, you'll enjoy fuller sound and higher efficiency for an impressive performance.
The textile dome tweeters feature oversized voice coils that match the tweeters' diameter, a design that provides more surface area for heat dissipation and allows higher power handling. You can adjust the sound to your liking with the tweeter level control.
Important Note: These Infinity speakers use a low impedance design to pull more power safely from your car stereo or amplifier. This design is compatible with all factory and aftermarket stereos.
Priced per pair
Product highlights:
- 4" 2-way speakers (pair)
- Plus One+ Injection-Molded Polypropylene (IMPP) woofer cone with hi-roll rubber surround
- 1" edge-driven textile dome tweeter
- 2-ohm impedance for extra power (compatible with all factory or aftermarket car stereos)
- power range: 2-35 watts RMS (105 watts peak power)
- frequency response: 85-21,000 Hz
- sensitivity: 92.6 dB
- top-mount depth: 1-15/16"
- warranty: 1 year
- MFR # REF4022I
What's in the box:
Infinity Reference 4022i owner's manual
- Two 2-way speakers
- 2 Grilles
- 2 Grille frames
- Eight 1" Self-tapping screws
- 8 Speed clips
- 2 Adhesive backed foam gaskets
- Instructions
- Warranty card
Featured video:
Customer reviews for Infinity Reference 4022i
Loading...
Loading reviews...
Average review:
5.0 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Infinity Reference 4022i
Features & specs
General | ||
---|---|---|
Speaker Size | ||
Design | 2-way | |
Tweeter Design | 1" Dome | |
Impedance (Ohms) | 2.65 | |
Tweeter Composition | Textile | |
Woofer Composition | IMPP | |
Woofer Surround | Hi-roll rubber | |
Parts Warranty | 1 Year | |
Labor Warranty | 1 Year | |
Specifications | ||
Sensitivity (1W at 1 meter) | 86.9 | |
Sensitivity at 2.83 volts | 92.6 | |
Frequency Response | 85 - 21k Hz | |
Minimum RMS Wattage | 2 | |
Maximum RMS Wattage | 35 | |
Peak Power Handling (Watts) | 105 | |
Top-mount Depth (Inches) | 1 15/16 | |
Bottom-mount Depth (Inches) | N/A | |
Cutout Diameter or Length (inches) | 3 11/16 | |
Mounting Height (Inches) | 0.734 | |
Frame Width | 4.046 | |
Frame Length | 4.046 |
Product Research
Features
Plus One+ Woofer Cones: Each speaker uses a cone significantly larger than other speakers of the same size. This is accomplished by using a unique basket design and hi-roll surround. The Plus One+ design offers greater bass output and a significant increase in efficiency.
Woofer Materials: Each woofer is constructed from Injection-Molded Polypropylene. This process of cone molding assures a uniform cone thickness for superior linearity and clarity. It is also lighter weight and more rigid for decreased distortion and improved bass response.
Hi-roll Rubber Surrounds: The hi-roll rubber surrounds allow the woofers a greater range of movement, resulting in longer X-max and more bass output.
Textile Dome Tweeters: Each speaker uses an edge-driven textile dome tweeter for smooth, accurate highs. A switch on the front of the tweeter allows you to boost the tweeter output 3dB, useful if the speakers are mounted low in a door where high frequencies are easily absorbed.
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...