Chat
Contact us
Close contact box
Connect ID #
548 937 387 4
Connect ID #
548 937 387 4
Don't wait on hold. We'll call you back when it's your turn to talk with the next available .
Please enter your name  
Please enter your phone number  
Please enter a message  

Calls may be recorded for training and quality control purposes.

We are located in Virginia USA.

Thank you. We will be calling you .
We're sorry. We have encountered a problem.

Metra 70-5519 Receiver Wiring Harness Connect a new car stereo in select 2001-03 Ford and Lincoln vehicles

Item # 120705519

This vehicle-specific wiring harness makes connections between your new car stereo and your car's electrical...

Find what Fits your vehicle

Remove

Checking fit...

This vehicle-specific wiring harness makes connections between your new car stereo and your car's electrical...

California customers:
Please click here for your Proposition 65 warning.

7 questions - 11 answers

Item # 120705519

In stock
$19.99

About the Metra 70-5519 Receiver Wiring Harness

Metra 70-5519 Receiver Wiring Harness

This vehicle-specific wiring harness makes connections between your new car stereo and your car's electrical system.

Metra 70-5519 Receiver Wiring Harness

Installation Note: This harness uses your factory amplifier; your new stereo must have one pair of preamp outputs to connect this harness.

This vehicle-specific wiring harness makes connections between your new car stereo and your car's electrical system.

First, attach the color-coded wires on your Crutchfield-supplied harness to the wires from your new stereo. If you're not using a soldering iron, we recommend that you purchase some wire connectors to secure the connections. Check out our handy article on three ways to connect the wiring harness here.

Now, once this harness is connected to your new stereo, you'll be able to plug right into your car's factory radio connector. This harness makes installing your new stereo easier, and allows you to put the factory radio back when you sell your vehicle or return it at the end of the lease. A detailed instruction sheet comes with the harness. Warranty: 60 days.

Please read this important note: This harness may not contain provisions for every wire needed to complete your installation, and it will not accommodate special navigation, video, or factory steering wheel control connections. You will need a special adapter if you want your factory steering wheel audio controls to work with your new stereo.

READ LESS

What's in the box:

  • 7" Wiring harness
  • 12" RCA harness
MFR #70-5519

Customer reviews for Metra 70-5519 Receiver Wiring Harness

Loading reviews...

Average review:

4.0 out of 5 stars
60 reviews

Thanks for submitting your review

Filter by rating

Customer photos

Customer provided image, click to load a larger version.
Customer provided image, click to load a larger version.

Sort reviews

Sort by:
Items per page:
View page:

Verified customer (What's this?)
Verified employee review (What's this?)

Reviewed on Samsung.com

This review was collected as part of a promotion

Pros:

Cons:

Crutchfield response
Customer provided image, click to load a larger version.
<< >>

More details on the Metra 70-5519 Receiver Wiring Harness

Stacey B.

Product Research

Features

Wiring Harness: This wiring harness prevenst you from having to cut your vehicle's factory radio plug when replacing your factory radio with an aftermarket head unit. Simply solder or crimp the wiring harness to your aftermarket head unit's harness (solder & crimps not included), plug the aftermarket head unit's plug into the rear chassis of the aftermarket head unit, and plug the wiring harness into your vehicle's factory radio plug.

Note: Installation tools, hardware, & accessories are not included & sold separately. Please see the Accessories tab for recommendations & availability.

Wiring Notes: If the wiring harness is not equipped with a ground wire, you will need to ground the aftermarket head unit's ground wire to the metal chassis of your vehicle. Some vehicle's may require you to bypass the vehicle's factory amplifier (in another location from factory radio) or hardwire certain connections. If your vehicle is equipped with factory steering wheel controls, an additional adapter is required & sold separately.

Wire Code Chart:

(Receiver Wiring Harness)

Wire Color Function
Red +12 Volt Accessory
Yellow +12 Volt Constant
Black Chassis Ground
Black/White Amp Ground
Orange Illumination
Orange/Black Not Used (tape-off)
White Left Front Speaker +
White/Black Left Front Speaker -
Gray Right Front Speaker +
Gray/Black Right Front Speaker -
Green Left Rear Speaker +
Green/Black Left Rear Speaker -
Violet Right Rear Speaker +
Violet/Black Right Rear Speaker -

(Subwoofer/Center-Channel Harness)

Wire Color Function
Black/White Amp Ground
Black/White Amp Ground
Blue/White Amp Turn-On
Blue/White Amp Turn-On
White RCA Subwoofer Channel
Red RCA Center Channel

Loading accessories...

Customer Q&A

7 questions already asked

Q
I have a 2002 Ford Thunderbird I installed pioneer dmh241ex with the wiring harness without the steering wheel controls and now my dash lights are not working?and I have checked the fuse
peter  May 21, 2023
1 answer
A
I cannot diagnose any issues from my end here sadly, Peter. We provide lifetime Technical Support for all products purchased from Crutchfield, so if you got your gear from us do not hesitate to reach out on our Technical Support hotline and we can do our best to help!
bo  May 21, 2023 (Staff)
Q
I have a 02 ford ranger w/ the tremor package. Will this harness make the factory system w/ factory subwoofer work for a aftermarket pioneer radio? [DEH-S5250BT]
ej  Sep 17, 2022
1 answer
A
That particular Metra harness would not be compatible with your Ranger but the Metra 70-5518 would allow you to retain the factory subwoofer. I will link it down below. https://www.crutchfield.com/p_120705518/Metra-70-5518-Receiver-Wiring-Harness.html
arielle  Sep 17, 2022 (Staff)
Q
Wiring harness for 2004 mustang gt mach sound system?
pappy  Mar 23, 2021
1 answer
A
Not exactly sure what your question is, but I don't own a 2004 mustang.
john  Mar 25, 2021
Q
So this is what I need to replace my Mach 1000 head with an after market am/fm/cd/bt?
jimmy  Sep 01, 2018
1 answer
A
Yeah this worked perfect for wiring up my pioneer headunit
jonathan  Sep 01, 2018
Q
WHERE DO THE BLUE AND WHITE WIRES AND THE BLACK AND WHITE WIRES GO THAT ARE CONNECTED TO THE SAME PIECE AS THE RCA?
jd  Nov 13, 2016
1 answer
A
Thanks for your question. Go to the product page and click on the "Details" tab, you will see a full description of all the wires. If you purchased the product from Crutchfield, feel free to contact our Tech Support team. They can walk you through the connections. Our toll-free Tech Support number is printed on your invoice, and is also available under the "My Orders" tab in the "My Account" section of our website. If you did not purchase the unit from Crutchfield, then you may want to contact the manufacturer. You can also post your question in our forums: http://community.crutchfield.com. Or try our online support center: http://crutchfield.custhelp.com/app/answers/list/kw/.
kenneth  Nov 14, 2016 (Staff)
Q
the factory plugin to the original reciever has been cut off.will your wires match up?
brian  Nov 04, 2015
1 answer
A
For details on fit or installation please contact an Advisor by phone (1-800-324-9695) or online chat. They will be able to pull up your vehicle and give you the details on if this will fit and what you will need for an installation in your vehicle.
kristina  Nov 04, 2015 (Staff)
Q
What do you plug the RCA plugs to?
frank  Sep 22, 2014
5 answers
A
In the sub woofer rca
chris  Sep 24, 2014
A
Plugged them in and big difference... Thanks!
frank  Sep 23, 2014
A
The back of your stereo. Subwoober out or rear output.
david  Sep 22, 2014
A
I thought I plugged them into the back of the unit.
zach e  Sep 22, 2014
A
Nothing!
jacob  Sep 22, 2014
SHOW MORESHOW LESS

Loading articles...

Compare the sound