About the K&N Fuel Injection Performance Kit
Billed as the "manufacturer of the world's best air filters," K&N produces the most widely used filters for the professional motorsports industry, with over 80% of all off-road racing vehicles using their products. Independent labs verify the increases in power and performance claimed by K&N products.
Increase the horsepower and throttle response of your vehicle's engine with a K&N Fuel Injection Performance Kit intake system! This FIPK intake is engineered to replace the factory air box of your 2001-02 Lexus IS300.
The washable, reusable filter element used in this FIPK allows for the virtually unrestricted flow of more (and cooler) air to your engine. This results in improved performance performance you can feel every time you step on the accelerator. The fluid, dynamic design also smoothes out and straightens the airflow air moving in a straight line is more effective than the turbulent air typically sent by factory systems.
Each FIPK comes with comprehensive installation instructions you might be surprised how easy they are to install! To ensure that this FIPK will work with your car, click on "What Fits My Car?" and enter its year, make, and model in our Vehicle Selector (if you haven't already). You can also call a Sales Advisor at 1-888-955-6000.
Important Note: K&N intakes work with your vehicle's factory computer emissions controls, and they're street legal in most states. Call K&N at 1-800-858-3333 to make sure this model has been approved for use in your state. These intakes are so effective, they're backed by K&N's impressive 10-year, million-mile limited warranty!
What's in the box:
K&N Fuel Injection Performance Kit owner's manual
- The Main box contains one smaller box (Filter box) and the following items:
- Two #44 hose clamps
- 1 Hump hose
- 1 Intake tube
- Two 8mm-1.25 x 16mm hexhead bolts
- 2 Washers (5/16" inner diameter and 5/8" outer diameter)
- One 8mm nylock nut
- 1 Small bracket
- One 3/8" to 3/8" hose vent
- 1 Silicone hose
- One 1/4 NPT 5/16" barbed vent
- Two M4-0.7 x 16mm button head screws
- 1 Gasket
- 1 Twist "L" bracket
- Three 6mm nylock hexhead nuts
- 6 Flat washers (1/4" inner diameter and 5/8" outer diameter)
- 1 Nylon conical washer
- 1 Saddle bracket
- One M6-1.00 x 20mm bolt
- One 26" edge trim
- 1 Filter adapter
- 1 Heat shield
- Two 8mm wave washers
- Two 6mm wave washers
- 1 Angled I-bend bracket
- One #60 hose clamp
- Three M6-1.00 x 16mm hexhead bolts
- One 8mm-1.25 x 25mm button head bolt
- One #48 hose clamp
- 2 Spacers
- Installation Instructions
- 1 C.A.R.B. exemption sticker
- Air Filter Service Instructions
- Warranty Claim Card
- Two 3-1/2" x 1-3/8" "K&N Performance Filters" stickers
- The Filter box contains:
- 1 Filtercharger element (part #RP-4980)
- One #64 hose clamp
- Purchaser Profile & Product Registration sheet (has detachable "Important Service Information" flap)
- 1 "Do Not Discard" sticker
- One 3-1/2" x 1-3/8" "K&N Performance Filters" sticker
Customer reviews for K&N Fuel Injection Performance Kit
Loading...
Loading reviews...
Average review:
5.0 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the K&N Fuel Injection Performance Kit
Product Research
Features
Overview: The K&N 57 Series Air Intakes Kit (FIPK) is made for many different vehicles and offers a dramatic improvement over your vehicles OEM air filter. The K&N 57 Series kit uses a large conical shaped high-flow air filter that provides greater airflow with lower restriction. The oversized air filter also captures and holds more dirt increasing the service life before a cleaning is required (up to 100,000 miles). When possible, the K&N filter is isolated from high engine temperature by a heat shield designed to lower the temperature of the air entering the engine, which increases horsepower. The K&N 57's high-flow air filter is attached to a rotationally molded tube made from interlaced high density polyethylene (HDPE). The intake tube is precisely shaped to reduce turbulence and accelerate airflow into the engine. The intake tube is then connected to the your vehicle's engine with adapters made from high-strength materials, such as silicon and reinforced nylon to ensure long-life.
Note: CARB Exempt and street legal in all 50 US States.
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...