About the Q-Customs Factory-fit Dual 10" Subwoofer Enclosures
Designed to give you factory fit and finish plus great sound and durability, this Q-Customs custom-fit enclosure by Q-Logic holds two 10" Type 1 subwoofers and fits perfectly into the storage well.
The photo shows how well this enclosure integrates with the interior of your vehicle. It looks like original equipment, but gives you deep, pounding bass no factory sound system can touch. Internal volume is 0.65 cubic feet per side. 1-year warranty.
Please check with us before purchasing by using the vehicle selector on our site, or calling a Sales Advisor at 1-888-955-6000 to verify fit information. To match your vehicle's color, be sure to choose the color and year that matches the specific model year of your vehicle.
What's in the box:
Q-Customs Factory-fit Dual 10" Subwoofer Enclosures owner's manual
- Dual woofer enclosure (for 10" woofers)
- 1-"beige" colored plastic fascia
- 2-"beige" colored plastic mesh grilles
- 2-22" lengths of speaker wire (0.205" female quick-slides on each end)
- 8-1" self-tapping screws
- Two 12" x 12" pieces of polyester fiber
- instruction sheet
Customer reviews for Q-Customs Factory-fit Dual 10" Subwoofer Enclosures
Loading...
Loading reviews...
Thanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Q-Customs Factory-fit Dual 10" Subwoofer Enclosures
Features & specs
General | ||
---|---|---|
Box Type | Sealed | |
Number of Boxes | 1 | |
Number of Speakers Per Box | 2 | |
Speaker Size | 10 | |
Cutout Diameter or Length (inches) | 9 1/16 | |
Maximum Speaker Depth (inches) | 5-3/16 | |
Box Volume (cubic feet) | 1.3 | |
Tuning Frequency | N/A | |
Height (inches) | 12-1/4 | |
Width (inches) | 40-1/2 | |
Depth (inches) | 16-1/2 | |
Second Depth (inches) | 13-1/8 | |
Wood Thickness (inches) | 5/8 | |
Speaker Wire Connectors | 5-way posts | |
Box Color | Beige/Black | |
Box Finish | Carpet/Plastic | |
Parts Warranty | 1 Year | |
Labor Warranty | 1 Year |
Product Research
Features
Overview: The enclosure is a two piece unit consisting of a enclosure made of 5/8" particle board and a "beige" colored plastic fascia. The fascia is colored to match the "beige" interior found in some 1992 Chevy Camaros, Pontiac Trans Ams and Pontiac Firebirds. Two rectangular, 2 1/2" tall, black plastic riser blocks are attached to the bottom of the enclosure; the riser blocks will hold the bottom of the enclosure 2 1/2" off of the storage well floor (overall enclosure height including the riser blocks is 12 1/4").
Wiring: There is two sets of gold-plated 5-way binding posts (with plastic wire retention nuts) mounted on the rear of the enclosure. The wires supplied to connect the terminal cups to the woofers are terminated at each end with 0.205" female quick slides.
Installation Note: Run speaker wires from amplifier to enclosure. Place enclosure in rear storage well (between rear wheel wells), and permanently secure the enclosure to the vehicle (see note below). Place plastic fascia on box. Connect speaker wire between woofers and terminals. Place woofers on top of fascia. Run screws through woofers, fascia, and into box. Press grills into fascia.Mounting: For sonic and safety purposes, Ai Research recommends permanently securing the enclosure to the vehicle. No mounting brackets are included, so, to permanently attach the enclosure to the vehicle, a bracket kit (item 125B702KIT) will be needed or brackets and screws may be purchased from a hardware store. Bracket mounting requires drilling and screwing into the vehicle and enclosure.
Loading...
Loading accessories...
Customer Q&A
2 questions already asked
Loading...
Loading articles...