About the Infinity Kappa 62.11i
Legendary sound
Legendary sound
Infinity's Kappa Series 62.11i 6-1/2" speakers continue in the tradition of this legendary line of speakers, offering rugged construction and impressive sound quality. Once installed, these speakers will bring out every nuance and detail in your favorite music tracks, making time spent in your car seem more like a concert than a commute.
Large soft dome tweeters
If you're looking for natural-sounding high frequencies, Infinity uses edge-driven 1" soft dome tweeters in this system. The "edge-driven" design creates a larger tweeter that handles more power and delivers smooth response way down into midrange frequencies not covered by smaller "W"-shaped domes. You'll hear a more clearly defined soundstage where you can picture the placement of every instrument.
Infinity's UniPivot design allows you to aim each tweeter toward your ears, so you enjoy excellent stereo imaging even if the speakers are mounted way down low in your doors. Each tweeter also features a level control switch so you can adjust the brightness to your taste.
Glass fiber woofer with Plus One+ technology
If you like bass, the Kappa glass fiber woofer holds its shape when the power's cranked up, so you still get punchy and defined bass. Glass fiber weighs less than traditional materials, so you don't need a ton of power to drive this woofer. Infinity's Plus One+ woofer technology extends the cone right up to the edge of the basket, giving you more surface area than with most comparable speakers. A bigger cone means more bass to complement the superior high-frequency response.
Great for any system
These 2-ohm speakers are sensitive enough that you can power them with an aftermarket stereo, but you'll get your best results feeding them plenty of power from an outboard amp — up to 75 watts RMS. Grilles are included.
Product highlights:
- 6-1/2" 2-way car speakers
- Plus One+ glass-fiber woofer cone with hi-roll rubber surround
- 1" edge-driven, soft dome tweeter
- included brackets allow mounting in a variety of 6-3/4" and 6-1/2" openings
- 2-ohm impedance
- power range: 5-75 watts RMS (225 watts peak power)
- frequency response: 45-25,000 Hz
- sensitivity: 95 dB
- top-mount depth: 2-1/8"
- grilles included
- warranty: 3 years
- MFR # 62.11i
What's in the box:
Infinity Kappa 62.11i owner's manual
- Two 2-way speakers
- 2 Grilles
- 2 Grille rings
- 2 Plastic 6-3/4" adapter brackets
- Eight 1-3/8" Self-tapping screws
- Eight 1/2" Self-tapping screws
- 8 Speed clips
- 2 Adhesive backed foam gaskets
- 2 Adhesive backed Infinity logo badges
- Instructions
Customer reviews for Infinity Kappa 62.11i
Loading...
Loading reviews...
Average review:
4.5 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Infinity Kappa 62.11i
Features & specs
General | ||
---|---|---|
Speaker Size | 6 1/2 | |
Design | 2-way | |
Tweeter Design | 1" Dome | |
Impedance (Ohms) | 2 | |
Tweeter Composition | Textile | |
Woofer Composition | Formed glass fiber | |
Woofer Surround | Rubber | |
Parts Warranty | 3 Years | |
Labor Warranty | 3 Years | |
Specifications | ||
Sensitivity (1W at 1 meter) | N/A | |
Sensitivity at 2.83 volts | 95 | |
Frequency Response | 45 - 25k Hz | |
Minimum RMS Wattage | 5 | |
Maximum RMS Wattage | 75 | |
Peak Power Handling (Watts) | 225 | |
Top-mount Depth (Inches) | 2 1/8 | |
Bottom-mount Depth (Inches) | 2 1/2 | |
Cutout Diameter or Length (inches) | 5 1/8 | |
Mounting Height (Inches) | 0.834 | |
Frame Width | 6.123 | |
Frame Length | 6.123 |
Product Research
Features
Plus One Woofer Cones: The Plus One speaker cones offer more surface area than other speakers that fit in the same size opening. This is accomplished by using a new basket design and hi-roll surround. The result is greater bass output and a significant increase in efficiency.
Formed Glass Fiber Woofer Cones: The formed glass fiber cone material is very light and extremely stiff, minimizing flex. This results in very low distortion and improved clarity.
iCGM frames: The Kappa series speaker baskets are made of composite Injected Carbon Glass Matrix (iCGM). iCGM is lighter and stronger than stamped steel; it retains its shape, even when mounted on uneven surfaces (common in car mounting locations), plus offers exceptional damping of any resonances.
Woofer Size: These speakers are marketed as 6-1/2"; they will fit in standard 6-1/2" speaker openings, but do not use the standard 6-1/2" speaker bolt pattern. In order to install them in standard 6-1/2" speaker openings you must drill new screw holes. If new holes are drilled in the mounting surface of the car, no bracket is needed. If drilling in the car is not an option, the included brackets can be used, which have standard 6-1/2" mounting holes and the Ford non-symmetric four hole pattern. When using the brackets the depth becomes 1.878" and the mounting height becomes 1.066".
Edge Driven Dome Tweeters: Each speaker has a 1" Edge-driven textile soft dome tweeter. An edge-driven tweeter has better dispersion characteristics and allows for a lower crossover frequency than typical tweeters of the same size, which improves imaging. The result is improved vocals and musical clarity. The tweeter also has an adjustable output level, +0 dB (flat) and +3 dB.
UniPivot Tweeter: The tweeter is angled and can be rotated about 315° after installation. This allows you to direct the tweeters toward the listeners, very useful for speakers mounted low in a door.
High-Output Design: The high output 2-ohm voice coil design compensates for the high in-line resistance of small gauge factory wiring and extracts every watt from factory receivers, increasing overall system output and efficiency (relative to 4 ohm speakers). The speaker's 2.0-ohm impedance combined with the impedance of your speaker wire provides a true 4-ohm load to your connected headunit or amplifier. The speakers also benefit from increased power when you upgrade the wire and add aftermarket amplifiers, designed to power a 2-ohm load.
Terminals: The input terminals are gold-plated set screws that will accept up to 12 gauge bare wire.
Power Handling: Although Infinity lists the RMS power handling as 75 watts, they also list the recommended power range as 5-125 watts RMS. We've opted to list the more conservative 75 watt RMS figure on the specifications page.
The Infinity Kappa 62.11i replaces these items
Infinity Kappa 652.9i
- Plus One woven-glass-fiber woofer with rubber surround
- Unipivot M.M.D. dome tweeter
- 2-75 watts RMS power range
Infinity Kappa 62.9i
- Plus One woven-glass-fiber woofer with rubber surround
- Unipivot M.M.D. dome tweeter
- 2-75 watts RMS power range
Infinity Kappa 63.9i
- Plus One woven-glass-fiber woofer with rubber surround
- M.M.D. dome tweeter and UHF super-tweeter
- 2-75 watts RMS power range
Loading...
Loading accessories...
Customer Q&A
14 questions already asked
Loading...
Loading articles...
Amazing speakers. i have them installed in a 1989 suburban did some modification to have them in the doors bought i bought 2 sets and they sound amazing great qaulity and sound. best if you run them of a 4 channel amp better control and sound
alex from Hopkinsville, KY