Crossovers
Recommended Crossovers
|
Customer Favorite
2-way electronic crossover (Gray)
$129.99
1 person says:
|
Staff Pick
Trunk-mount 2-channel equalizer with 2-way crossover (Gray)
$339.99
1 person says:
|
Kicker KX2
Active 2-Way Electronic Crossover
IN STOCK- Speaker- and preamp-level inputs
- 2 pairs of outputs (lows/highs)
- variable 40-300 Hz at 18 dB per octave
AudioControl 2XS
2-way electronic crossover (Gray)
IN STOCK- 2-way electronic crossover (90 Hz at 18 dB/octave)
- gray steel chassis with gold-plated RCA jacks
- line driver with adjustable output (up to 9 volts)
AudioControl 2XS
2-way electronic crossover (White)
LOW STOCK- 2-way electronic crossover (90 Hz at 18 dB/octave)
- white steel chassis with gold-plated RCA jacks
- line driver with adjustable output (up to 9 volts)
AudioControl MAX Module Pack
70 assorted crossover modules with storage case
IN STOCK- customize the crossovers on your AudioControl processor
- assorted high-pass, low-pass, and subsonic (PFM)
- 30-drawer storage case included
Kicker KX3
Active 3-Way Electronic Crossover
IN STOCK- Two pairs of inputs
- 3 pairs of outputs (subwoofer/front/rear)
- front/rear variable 35-400 Hz at 18 dB per octave (20X multiplier on front)
AudioControl DDC
Dash-mounted digital controller for AudioControl processors
IN STOCK- dash-mount controller for easy access to your AudioControl processor
- includes a 20-foot cable and a handy remote control
- works with AudioControl's DQS, DQX, DQT, DQXS, and DQL-8 processors
AudioControl 6XS
6-channel electronic crossover with line driver (Gray)
LOW STOCK- 6-channel Linkwitz-Riley electronic crossover
- gray steel chassis with gold-plated RCA jacks
- line driver with adjustable output (up to 9 volts)
AudioControl 6XS
6-channel electronic crossover with line driver (White)
IN STOCK- 6-channel Linkwitz-Riley electronic crossover
- white steel chassis with gold-plated RCA jacks
- line driver with adjustable output (up to 9 volts)
AudioControl THREE.2
In-dash equalizer with crossover and line driver
IN STOCK
- preamp/equalizer and subwoofer crossover
- 3-band EQ (+/-12 dB at 125, 1,250, and 10,000 Hz) with parametric EQ for bass (+/-12 dB at 40 to 80 Hz)
- front and rear panel auxiliary inputs
AudioControl EQX
Trunk-mount 2-channel equalizer with 2-way crossover (Gray)
IN STOCK- dual 13-band equalizers with level matching controls
- gray steel chassis with gold-plated RCA jacks
- Linkwitz-Riley 2-way crossover (90 Hz at 24 dB/octave)
AudioControl EQX
Trunk-mount 2-channel equalizer with 2-way crossover (White)
LOW STOCK- dual 13-band equalizers with level matching controls
- white steel chassis with gold-plated RCA jacks
- Linkwitz-Riley 2-way crossover (90 Hz at 24 dB/octave)
AudioControl DQL-8™
Digital processor with 8-channel line output converter
LOW STOCK- 8-channel line output converter/processor
- designed to work with any factory stereo
- 8 high-level inputs with up to 400 watts RMS power handling
AudioControl DQXS
6-channel digital equalizer with 4-way crossover (Silver)
IN STOCK- silver 6-channel digital equalizer with 8-channel crossover
- six 30-band mono equalizers, plus six 2-band parametric EQs
- 6-channel inputs and 8 outputs (with level controls)
Alpine PXA-H800
Digital sound processor
PRE-ORDER- audio processor for use with any receiver, including factory systems
- IMPRINT sound technology adjusts receiver output to match vehicle acoustics
- surround sound decoding, plus Dolby Pro Logic II decoding
JBL MS-8
Digital sound processor
IN STOCK
- automatic equalization and time correction
- built-in amplifier (18 watts RMS x 8 @ 4 ohms/30 watts RMS x 8 at 2 ohms)
- 8-channel preamp inputs and outputs
Learning Center
- How to Choose a Crossover
- Looking for a crossover? Do you need a crossover? There are several different types - make sure you choose...
- How to Install a Crossover
- Passive crossovers are very easy to install, but active crossovers require a little more work.Find out about...
