1.888.955.6000
 
 

Looking for car stereos?

Car StereosStart shopping

2007-13 Toyota Tundra Double Cab

2007 • 2008 • 2009 • 2010 • 2011 • 2012 • 2013

This article is an overview of your vehicle's audio system and its upgrade options. If you're looking for step-by-step instructions on installing a car stereo or speakers in your Tundra, we'll include a Crutchfield MasterSheet™ free with your Crutchfield order, or you can purchase one for $9.99.
2007 Toyota Tundra Double Cab

2007 Toyota Tundra Double Cab (Crutchfield Research Photo)

Overview

When it comes to pickups, bigger isn't always better – but it sure can be helpful. Toyota spent years building tough, reliable trucks like the HiLux and the Tacoma, but as good as they were (which was very), small- to medium-size trucklets weren't quite enough in a country where full-size pickups generally sell faster than most cars – including Toyota's own Camry.

Toyota knew that if they were going to play with the big kids, they needed a big truck. The second-generation Tundra is big enough, tough enough, and strong enough to go head-to-head with the best of the Big Three. It's also a Toyota, though, which means the Tundra was available with a lengthy list of available features, including a not-bad factory JBL stereo system.

Bigger is almost always better when it comes to stereos, though. If you're looking to upgrade your Tundra's sound system, Crutchfield has the equipment and advice you need.

Tundra factory stereo (Crutchfield Research Photo)

The Tundra's factory stereo (Crutchfield Research Photo)

Factory system

The Tundra Double Cab had the option for either bench or bucket seats, depending on the owner’s preference. If you have the bucket seats, you'll need to disassemble the center console when you're replacing the factory radio.

Regardless of the interior setup, Toyota offered two different radio options in the Double Cab truck: an in-dash AM/FM/CD unit or the same radio with an in-dash 6-disc changer.

You could also choose between the standard 6-speaker system or an upgraded JBL system that features twelve speakers (including an 8" subwoofer) powered by a 440-watt amplifier.

Replacing your factory stereo

Removal and replacement of the factory stereo is somewhat complex because the dash enclosure employs a host of trim panels and accessory systems that you will have to contend with. It'll take some time to remove the Toyota radio, beginning with removal of the interior knee panel and the cup-holder assembly, followed by removal of the ashtray, displacement and disconnection of the heater control panel, and displacing the entire instrument panel, along with dealing with a myriad of trim panels protecting hidden screws, simply to gain access to the receiver.

Tundra stereo wiring bundles

A close-up of the stereo wiring bundles (Crutchfield Research Photo)

You can install a single-DIN or double-DIN radio in the Tundra, and the radio cavity offers 9 inches of depth to work with. Deciding on a new radio will offer no problems in terms of available space. You'll need a mounting kit to trim out the new radio and a wiring harness that allows you to connect your new radio to the factory wiring. (Crutchfield includes these installation parts free with most orders, along with our step-by-step instructions for your Tundra.)

If you have the JBL option, you will have to buy and install a special integration adapter, the TATO adapter from PAC, that ties your new car stereo into the JBL's amplified speaker system. You'll want to pick a stereo with two sets of full-range preamp outputs to interface with this adapter; otherwise, you'll need to purchase a 4-channel line output converter. (Crutchfield offers a 50% discount on the special adapter that you'll need for this JBL installation.)

Note: You'll lose the following factory options when replacing your Toyota radio. Fortunately, most new stereos include these features:

  •   factory AUX input connection
  •   factory XM reception
  •   factory hands-free cell phone interface, if your truck is so equipped

Tools needed: Phillips screwdriver, small flat blade screwdriver, panel tool, 10mm socket, ratchet & extension, pliers

Steering wheel controls

The Tundra's steering wheel controls (Crutchfield Research Photo)

Steering wheel audio controls

The Tundra has steering wheel audio controls, and Crutchfield offers adapters that let you retain the use of those controls with a new stereo.

If you have the non-JBL system, you should purchase the Axxess ASWC-1 adapter along with the Metra 70-8114 harness. This combination allows you to connect it all without having to cut and splice.

If you have the JBL system, you'll want to buy the adapter made by PAC. It will plug right into the special TATO integration adapter (mentioned above) that's also made by the same company.

Shop for car stereos that fit your Toyota Tundra

Replacing your factory speakers

Depending on whether you have the vanilla factory package or the upgraded JBL entertainment system in your truck, the central differences between the two setups are the number and placement of each system’s speaker array.

Standard speaker system

Dash speakers: In the case of the regular system, the factory setup includes a 2" tweeters at each corner of the dash just below the windshield. Replacing the dash speakers is considerably easier than working with the receiver installation, and primarily requires prying up each dash grille and removing two screws. The only bit of complexity comes when you try to find tweeters that'll fit in these locations.  You will have to fabricate mounting brackets for any tweeters you select, and you'll either have to splice into the factory wiring or use a set of Posi-Products connectors.

Dash tweeter location (Crutchfield Research Photo)

Dash tweeter location (Crutchfield Research Photo)

The factory tweeter removed (Crutchfield Research Photo)

The factory tweeter removed (Crutchfield Research Photo

Front door speakers: Along with this tweeter complement, the Tundra has an oddly shaped 6"x9" speaker built into an integrated bracket installed in each front door.  Aftermarket 6"x9"s won't fit because of that integrated bracket, so your best bet is a set of 6-1/2" or 5-1/4" speakers that will drop right in with the help of mounting brackets. Speaker harnesses are available for both locations. They'll allow you to attach the new speakers to the plugs that connect to the Toyota factory speakers, and they make it easier to reinstall the factory speakers if you ever sell your truck.  Crutchfield offers these speaker mounting brackets and wiring harnesses at a deep discount with every speaker order.

The process of installing door speakers is simply requires removal of the door’s sail panel, followed by several hidden screws placed under trim covers, disconnection of the electric door controls and, finally, removal of the entire arm-rest assembly. Once those components are free and clear of the door panel, simply unscrew the door panels, take the panel off the assembly, set it aside, and unscrew four speaker fastenings.

Tundra's front door (Crutchfield Research Photo)

Tundra's front door (Crutchfield Research Photo)

Door panel removed (Crutchfield Research Photo)

Door panel removed (Crutchfield Research Photo)

Rear door speakers: In the Double Cab truck, the rear door factory speaker is a 6-3/4" that's also built into a bracket. And, again, your best bet is a set of 6-1/2" or 5-1/4" speakers that will drop in with the help of mounting brackets. Speaker harnesses are also available for the rear door locations. Replacing the rear speakers is very similar to the front doors except that the process begins with the rear window trim panel.

Double%20cab%27s%20rear%20door%20%28Crutchfield%20Research%20Photo%29Double Cab's rear door (Crutchfield Research Photo)
Rear%20door%20panel%20removed%20%28Crutchfield%20Research%20Photo%29Rear door panel removed (Crutchfield Research Photo)
JBL speaker system
Front door tweeter in the JBL system (Crutchfield Research Photo)

Front door tweeter in the JBL system (Crutchfield Research Photo)

JBL's 12-speaker system includes a center dash speaker, two dash tweeters, 6"x9" speakers with separate tweeters in the front doors, 6-3/4" speakers and tweeters in the rear doors, and an 8" subwoofer in an enclosure behind the left rear seat.

The Toyota brochure cites a 440-watt power rating for the JBL amp that powers this system, but these ratings are usually combined peak wattage ratings. That said, you'll still get good results using that special adapter to tie your new car stereo into the JBL system.

If you decide to replace all your speakers while keeping the JBL amp, keep in mind that they're all 2-ohm speakers. You'll want to pick speakers with lower impedances (like JBL or Infinity) to replace them or you'll hear a significant loss of volume. Harnesses are available for all locations except for the tweeters – you'll have to splice into the factory wiring to replace the factory tweeters.

Tools needed: Phillips screwdriver, small flat blade screwdriver, panel tool

Shop for speakers that fit your Toyota Tundra

Bass in your Tundra

You'll find a few options for adding bass to the Tundra Double Cab, including enclosures from JL Audio  and MTX.

JL Audio Stealthbox: JL Audio makes a Stealthbox for the Tundra (below left), which offers one 8" sub in a ported enclosure. This option eliminates the need to remove the under-seat utility box in the Tundra’s extended cab version. The system is placed under the driver-side rear seat. The enclosure is available in Black, Tan, and Gray.

MTX ThunderForm:  MTX makes a ThunderForm enclosure for the Tundra (below right). It's loaded with a 10" sub that installs under the rear seat.

JL Audio StealthboxJL Audio Stealthbox
MTX ThunderFormMTX ThurnderForm

Shop for vehicle-specific subwoofers for your Toyota Tundra

More Options

Here are some other ways to improve your Tundra:

Security systems

Adding a security system or remote start system to the Tundra is a straightforward installation. All of the connections can be made behind the driver's side dash area. Other than the remote start or alarm of your choice, the only other part required will be the FlashLogic FLCAN module. No other diodes or anything like that are required. The FLCAN will bypass the transponder if you are installing remote start, and will control the door locks, and provide status outputs if you're adding a system with keyless entry or alarm features. 

Shop for car security systems for your Toyota Tundra

IPod adapters

If you want to keep your Toyota radio, you'll find several options for connecting and controlling your iPod with the factory radio. You'll want to pay close attention to the qualifiers for these adapters, as some use the changer control port on the factory radio while others use the satellite radio connection.

Good, better, best

Good:  Whether you are working with the standard factory radio, Toyota’s factory speakers are pretty good. So as a first step we suggest upgrading your receiver first then see what else needs to be done. As for the JBL upgrade, this speaker complement is already worth keeping, so look to an upgraded receiver or double space GPS/receiver as an initial move.

Better: If you decide you want a more refined sound in your Tundra, go to some upgraded tweeters and two-way cones, along with looking into more sophisticated subs. Finally, you might want to go with some supplementary amplification.

Best: If you want to rock your Tundra, install a large sub enclosure by replacing the utility locker, then go with hi-watt amplification. You can also add a AudioControl equalizer to really get serious about setting up your system.

Gift Card The Great Gear Giveaway

Sign up for our email newsletter and then enter to win a $500 Rewards Card.

A homepage for your vehicle

Tell us about your vehicle, and you'll be able to see:

  • A homepage that lists all of our products that fit your vehicle
  • The installation hardware you’ll get free with your order

 
New to Crutchfield? Here are 3 things we want you to know about us.
  • With most orders, we include our own step-by-step instructions on how to install audio gear in your vehicle.
  • Remember the mounting kit and other installation parts we mentioned in this article? They're free with most car stereo or speaker orders.
  • Our tech advisors know their stuff, they're here 7 days a week to help you install your car audio gear.

Custom Car Showroom
A showcase ranging from customer systems to serious show cars