Image-stabilized lenses stop the shake
Zak Billmeier grew up in southern Vermont and coastal Maine. After graduating from Mary Washington College with a Geography degree he still isn't sure quite what to do with, he eventually settled in the mountains of Central Virginia. He spends his free time chasing his daughter around, taking pictures, gardening and cooking. Zak traces the roots of his interest in electronic gadgets to the Casio wristwatch with a built-in calculator he received as a gift one year as a child. He joined Crutchfield's car A/V team in 2007.
More from Zak Billmeier
I shot a wedding recently with my Canon 40D and the Canon 28-135mm f/3.5-5.6 IS lens. I was hoping to be able to use the zoom lens rather than my faster prime lens (meaning a fixed focal length with a wider max aperture) for versatility's sake, but I was worried because it's a pretty slow (smaller max aperture, so less light gets to the sensor) for indoor work.
But while it is slow indoors, the 28-135mm zoom has an ace up its sleeve — image stabilization. The concept is hardly new, and this particular lens is one of the oldest in Canon's IS line, but it's the first time I've used image stabilization extensively. Let's just say I was "cautiously optimistic" how it would perform. Seemed almost too good to be true.
The very first thing I did when I got to the wedding site was go straight into the sanctuary for some test shots. Luckily for me, I was able to shoot at 1/30 to 1/80 second at ISO 800 — plenty fast enough for the image stabilizer, and at ISO 800 the 40D shows very little noise. Normally, shutter speeds as slow as 1/30 second are tough when you're shooting handheld; I have a very steady hand, but I only get well-focused shots about 50% of the time at 1/30 second. I was excited because I would now be able to shoot the ceremony, without a flash, using my zoom lens.
Now, one thing to remember here is that even though the image stabilization does its job and lets you get crisp shots at slow shutter speeds, it doesn't freeze time. The lens is still — but the world is still moving. It was something I kept in my mind as I snapped away. And later, I noticed I got some lucky "motion blur" shots of bodies moving around, thanks to the slow shutter speeds I was able to use. And the critical shots all came out the way I wanted.
Here's an example of what image stabilization can do for you — this is a shot that would require a tripod with a non-image-stabilized lens due to the slow shutter speed. With the stabilizer engaged, however, I was able to hold just still enough at 1/6 of a second.
Normally you'd need a tripod to take a "silky water" shot like this — but I was able to hold the camera still enough to hand-hold this shot at a slow 1/6 of a second, thanks to the image stabilizer on my lens.