Eric G's 2006 Pontiac Grand Prix GXP
Taking the time to get the sound just right
A DIY-er on a mission
However, the stock Monsoon sound system really bummed him out so he tried a number of paths to improve things, namely by integrating some older gear with new purchases from Crutchfield. To really hammer home his dedication, he let us know that this process has taken him approximately three years in total so far.
Items installed (early rounds):
- MTX re-Q signal processor
- A pair of Orion XTR-Pro 10" subs in a Q-Logic enclosure
- Orion HCCA-225 amplifier
- JL Audio C2-650 Evolution C2 Series 6-1/2"/6-3/4" component speaker system
- Alpine PXE-H660 IMPRINT sound processor
If at first you don't succeed...
So, how did Eric feel about his Pontiac Grand Prix GXP's sound system at first? "Originally I wanted to try and save the OEM head unit due its integration into the Grand Prix's Heads Up display. My big problems with the stock GM Monsoon system were one, the front sound stage speakers were very harsh and two, bass was, well lets just say okay at lower listening levels."
Eric tried a couple of solutions retaining the factory receiver, starting with the re-Q, subs, and Orion amplifier. "This actually worked really well to my surprise, but I still had the harshness problem in the front sound stage," he tells us. When it came time for new speakers, he turned to JL Audio. "I have always been a big fan of JL Audio speakers and I loved the ZR series component set I had in my old Grand Prix."
Eric's Orion 10" subs in their trunk enclosure, still booming after several installations.
So he incorporated the JL Audio component system, but ran into an issue with the factory Monsoon amp, which is set up to work with the factory midbass drivers, which are wired at 2 ohms. Since the JL Audio drivers are 4 ohms, Eric had to use the crossovers to run the JL Audio tweeters, and let the midbass drivers run wide open. The results were "improved highs, but less midbass and an overall unbalanced sound."
Eric's front door speaker installation in progress.
Enter the Alpine PXE-H660 sound processor. Eric spent a great deal of time trying to get the sound just right, as the factory head unit presented an "inherent loudness" problem, according to our do-it-yourselfer. "The really cool thing about the Alpine PXE-H660 was the time alignment, which gave an amazing sound stage. Fair results, but not as good as previous systems I had built. I just could not achieve balanced sound between low volume levels and high ones."
A touch of ingenuity
Eric tells us about how he was able to make adjustments without driving himself crazy. He used an electronic "breadboard" installation base which let him modify settings quickly without committing to a particular time-consuming setup involving soldered wires. With a breadboard and knowledge of electronics guiding him, Eric was able to work his way through many different settings on his original installation before coming to the conclusion that it wouldn't work without some different gear.
Another cool shortcut Eric used was a sliding board in the trunk for "mule car" installations that could easily be swapped out.
Most recent items installed:
- Pioneer AVH-P3400BH DVD receiver
- Metra 95-3527 in-dash receiver kit for double-DIN stereos
- Alpine MRX-F65 4-channel car amplifier
- JL Audio ZR 100-CT Evolution ZR Series 1" tweeters in the front doors
- Audio Control Matrix Plus 6-channel line driver
- Metra GMOS-01 factory integration adapter
- Hifonics Hfi1500 amplifier with remote bass control
- Axxess ASWC-1 steering wheel control interface
- StreetWires ZeroNoise 7 Series 6-channel patch cables
- StreetWires ZeroNoise 5 Series amplifier wiring kit
- StreetWires ZeroNoise 5 Series stereo patch cables
- A pair of Polk Audio MM3000 1" tweeters in the rear deck
-
Various capacitors, distribution blocks, sound-deadening material, and additional wiring
The Pioneer AVH-P3400BH DVD receiver looks great in the Pontiac Grand Prix GXP's dash.
Three years later
After a lengthy process, Eric finally "gave up on the whole 'keep the stock head unit thing' and finished the system off with a Pioneer AVH-P3400BH head unit which is nearly perfect." His one complaint about the Pioneer was the lack of power in its 2-volt line outputs, so he added the Audio Control Matrix Plus line driver, which upped the signal from the receiver to the amplifier without increasing the noise level.
The Audio Control Matrix Plus line driver feeds Eric's amps the signal they deserve.
Eric's final installation still uses the subs and sub box from the early days, plus the midbass drivers only from the JL Audio C2 speakers up front. Now he's added two amplifiers — an Alpine and Hifonics — to the mix after ditching the old Orion amp, and he's put some vintage Polk Audio tweeters in the rear deck to increase the highs in the back of the car (Eric descirbes the Polk MM speakers as "great stuff"). He also swapped out the C2 tweeters up front for some ZR tweeters, also by JL Audio. Eric also kept the factory options in his Grand Prix GXP (besides the Monsoon system) by adding a Metra GMOS adapter and Axxess steering wheel control adapter.
Eric's Alpine and Hifonics amps: Out of the vehicle and on the sliding board for testing.
Mission accomplished, for now
Eric tells us that he's "very pleased with the results. The sound is very clean and very balanced. I still have some cleanup work to do and am considering doing the full JL Audio ZR setup in the front doors." And so, as we at Crutchfield have learned over the years, a perfectionist's work is never truly done. Congrats on getting this far Eric, and we look forward to helping you in the future.
Vehicles in the Custom Car Showroom are submitted by customers and fans, and edited by Crutchfield writing staff. You can find more of these articles on the Showroom main page.
Comments (6)
Please share your thoughts below.
Eric-G from Williamsville
Posted on 1/16/2018
Door chimes were a little tricky. What I ended up doing was using Metra GMOS-01 which seems like the wrong choice, but it has an internal amp and works great to send chimes and On-Star to the center channel speaker in the dash. I did not want to add a black box anywhere else in the system.
Alexander Hrabe from Crutchfield
Posted on 8/22/2016
Vincent, a vehicle-specific harness will allow you to retain your warning chimes. Give us a call for more information on the right harness for your vehicle.
Vincent from Columbia
Posted on 8/17/2016
This may sound like a weird nitpicky question, but do you still have the door chimes after removing the stock head unit?
Eric-G from Williamsville
Posted on 3/27/2016
The only function lost in the Driver Information System is the Date which was stored in the OEM radio. All other functions work perfectly. Obviously the Heads-Up Display no longer shows audio system information like Radio Station or CD track. The system is now running Morel Virtus 602 mid bass drivers with a custom crossover and JL Audio ZR100-CT up front. Much better SQ mid bass and crystal clear high end.
Mike from hagerstown,md 21742
Posted on 2/28/2016
Ty dalton kept head unit with 12R and infinity kappas all round even 3/12 " incher blast all the kids stuff out lol my son mad
Dalton from Baltimore
Posted on 2/8/2016
By now you realized that you have LOST all Functions on the Driver Information System. I have a G8 GXP and went and put the Factory radio back in. Still running Factory Head unit and aftermarket speakers as well as 2 10 " Subs on a Five Channel Old School Phonix Gold Amp.