Features

OEM Integration Kit: This OEM Integration Kit allows you to replace the factory radio of your 2012-2013 Chevrolet Sonic or Spark vehicle with an aftermarket radio. The OEM Integration Kit includes a Radio Replacement/SWC interface module (RP5-GM41) with external chime module, radio & vehicle harnesses, and a radio housing kit which will accommodate double- or single-DIN aftermarket head units. This all-in-one OEM Integration Kit comes pre-loaded with OnStar retention, amplifier retention, SWC software, navigation based output signals, and other features that save time and money during installation.

Vehicle Compatibility: This OEM Integration Kit is compatible with 2012-2013 Chevrolet Sonic and Spark vehicles with 29-bit LAN v2 44-pin connector radios. Please consult Crutchfield's Outfit My Car to see if your vehicle is compatible. Visit www.pac-audio.com for more compatibility information.

Radio Housing Kit: The OEM Integration Kit includes a radio housing kit which allows you to mount a double- or single-DIN aftermarket head unit in your 2012-2013 Chevrolet Sonic or Spark vehicle's dash. The mounting kit is made of durable ABS plastic and is available in a black or dark grey finish. A 6.125" (w)  x 1.5" (h) x 4.125" (d) pocket is included, when installing an aftermarket single-DIN head unit.

Radio Replacement Module: The included radio replacement interface (RP-5GM41) allows the replacement of the factory radio in your 2012-2013 Chevrolet Sonic or Spark with an aftermarket head unit.  This interface module allows you to retain factory features such as OnStar, Bluetooth, steering wheel control (SWC), and warning chimes. The RP5-GM41 also provides data bus driven outputs such as retained accessory power (RAP), vehicle speed sensor (VSS), illumination, reverse trigger, and parking brake.

Built-in SWC (Steering Wheel Control): The radio replacement interface features built-in steering wheel control and comes pre-programmed for all of your vehicle's factory SWC functions and does not require programming, unless you wish to re-assign the SWC functions to different buttons. The SWC harness contains a Blue/Yellow wire and a 3.5mm connector. You will only use one of the connectors, based on your type of aftermarket radio.

Radio Select Switch: The radio select rotary switch on the side of the interface must be adjusted to the proper radio setting before plugging the interface into the vehicle.

Aftermarket Radio Connection: The included wiring harness features the following hardwire connections to your aftermarket head unit.