Engine Noise: Noise,
caused by the vehicle's engine, can enter your stereo system in one of two ways:
through the power source and through the antenna. This noise increases and
decreases with speed. This filter eliminates engine noise coming through the
Note: For noise entering through the antenna, you should
install an Antenna Noise Filter (see item # 003AS100).
Multiple Applications: This
noise filter can be used for all audio components in your vehicle, including
receivers, equalizers, tape players, CD players, CD changers, or small
Capacity: The S-15A noise
filter is recommended for audio components rated up to 15 Amps and 250 watts.
Easy Installation: The filter
can be mounted to a flat surface using the supplied mounting screws and mounting
plate. You can also mount the filter using the supplied 10" wire tie. The
filter features three wires that need to be spliced into the power and ground
wires leading to the component. The red wire connects to the fused power wire
leading to the radio. The blue wire connects to the power lead of the receiver
(or component), and the black wire is connected to ground. The filter is most
effective when mounted close to the radio.
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to
find elsewhere. That's because we have our own in-house Product Research
team. They verify what’s in the box, check the owner's manual, and record
dimensions, features and specs. We stay on top of new products and technologies
to help people make informed choices.