Skip Navigation

American International SG600DX

Universal 1" liftrings for 5-1/4" or 6-1/2" speakers

4 Reviews

Item #: 003SG600DX

In Stock

Add to Cart

Ask an expert

Our VA-based experts can help.

1.888.955.6000

ChatEmail

Add to Cart

American International SG600DX

Overview

Extend your 5-1/4" or 6-1/2" speakers out of the factory speaker openings by 1" to allow for additional top-mounting depth. Screws not included. Warranty: 60 days.

American International SG600DX

Extend your 5-1/4" or 6-1/2" speakers out of the factory speaker openings by 1" to allow for additional top-mounting depth. Screws not included. Warranty: 60 days.

Important Note: Some 6-1/2" speakers use a larger frame and require a larger cutout. We call these 6-3/4" speakers, and they won't fit in this bracket. This bracket will only work with speakers that require a cutout diameter of 5-1/8" or less.

What's in the Box:

  • 2 Round lift rings
Reviews

American International SG600DX Reviews

Average Customer Review:

4 Reviews

Does not fit most 6.5" speakers

Written by: LaserJim from Georgia on September 23, 2015

Crutchfield Customer Review (What's this?)

The inside diameter of these lift rings is only 4 7/8". Most of the better 6.5" marine speakers (JL Audio, Wet Sounds, Hertz) require a cutout >5". To Crutchfield's credit, I called today to inquire about the Retrosound Retropods that were ordered at the same time. I mentioned the problem with the size of the American Int'l. lift rings and they gave me a full refund. Granted, they didn't cost that much, and I wouldn't have bothered to send them back. I may try to cut them out more but there's not much room to do so.

Pros: OK for 5.25" speakers.

Cons:

American International SG600DX

Written by: Anonymous from Minneapolis,MN on October 19, 2014

Crutchfield Customer Review (What's this?)

Great product

Pros:

Cons:

Universal 1" Liftring

Written by: John from Michigan on August 18, 2014

Crutchfield Customer Review (What's this?)

This product was easy to use and fit my Kenwood 6.5" speakers perfect. I used it for the radar arch on my boat that was to shallow for the speakers I wanted to use.

Pros: Pre drilled and easy to use.

Cons: only available in black so I had to paint.

not the right size

Written by: Anonymous from Charleston, SC on June 29, 2013

Crutchfield Customer Review (What's this?)

I spoke with a customer service rep and they said the spacers would hold a 6.5 inch speaker but they don't and now I have to modify them to make them hold the speakers. When I called back to see if there was a product that would work I was informed there was not one available. If they would have told we that in the first place I would have never ordered in the first place.

Pros:

Cons:

Details

Hands-on research

What's in the box?

Product Research

Features

Overview: The SG600DX is a generic (not vehicle specific) 1" lift ring designed to increase the available depth for select aftermarket 6-1/2 and 5-1/4 speakers. The mounting surface is recessed slightly in two steps; if the speaker's frame diameter is less than 5.91", the lift is 0.89"; if the speaker's frame diameter is less than 6.275", the lift is 1.002"; otherwise the lift is 1.05".

Dimensions:

  • Outer Diameter: 6.587"
  • Cutout Diameter: 4.92"
  • Height: 1.05"
  • Bracket Mounting Holes: holes are recessed and 0.2" in diameter
    • Perimeter: 3.857"
    • Diagonal: 5.44"
  • Speaker Mounting Holes:
    • Three-Hole Spacing (6-1/2): 4.815"
    • Four-Hole Spacing (5-1/4 or 6-1/2):
      • Perimeter: 3.935"
      • Diagonal: 5.575"

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Q & A

Customer Q&A

Crutchfield asked  
Why did you buy this?

Mounting speakers in a Lance RV and needed more depth for kicker 6.5" speakers [ Gregory  Jun 06, 2016 ]
Need to lift out some new JL Audio 6.5 " speakers for depth clearance. [ David  May 25, 2016 ]
Factory speaker was not as deep so I needed more depth to install the new speaker. [ David  May 17, 2016 ]
simple design, good price, available 61/2 & 6x9 [ Robert  May 11, 2016 ]
I needed the extra room to keep the speakers from interfering with the widow mechanism, and the speakers will work with the 5 7/8" opening. [ Brian  Apr 22, 2016 ]
Suggested by online advisor [ Lance  Mar 13, 2016 ]
They were vehicle specific replacement parts [ Leroy F.  Jan 26, 2016 ]
If the question refers to what looks like O-rings, they are something that the system appears to have selected, so I assumed they are needed. . The stereo and speakers are being purchased as they were requested by my grandson. [ Oscar  Dec 07, 2015 ]
Library

Searches related to the American International SG600DX Universal 1" liftrings for 5-1/4" or 6-1/2" speakers