Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere.
That's because we have our own in-house Product Research team — they open the box,
verify contents, check the owner's manual, and record dimensions, features and specs.
We stay on top of new products and technologies to help people make informed choices.
Inputs and Outputs
Virtually Invisible Speaker System
Design: The Virtually Invisible speaker system design gives you expansive
sound without dominating your décor. The Acoustimass module delivers deep,
powerful bass without audible port noise, so it can be hidden almost anywhere in
the listening area. The music and sound effects seem to come from the tiny cube
Next-generation Powered Acoustimass
Module: The newly engineered Acoustimass module uses a proprietary acoustic
enclosure and patented technologies to produce deeper, richer and louder bass
than the previous generation.
Technology: The Direct/Reflecting speaker technology helps the compact cube
speaker arrays deliver more open, spacious sound throughout the listening area.
You hear enhanced surround sound and exceptionally lifelike stereo with a larger
Integrated Signal Processing:
The Bose patented integrated signal processing compensates for the human ear's
reduced sensitivity to bass at low volumes. You hear the proper balance of deep
bass, even at very low, late-night listening levels and dialogue continues to
Automatic System Protection Circuitry:
When played at high volume, this system's automatic protection circuitry
activates to prevent damage to the system from electrical stress or overload.
When this happens, you may notice a slight decrease in volume, which is normal.
Drivers: The powered
Acoustimass module uses two 5-1/4" high-excursion paper cone woofers, each with a foam surround. Each cube speaker
array features dual 2-1/2" wide-range Twiddlers. The top and bottom
sections of the cube speaker arrays can be rotated to create room-filling sound
Cube Speaker Mounting: Each
cube speaker array has a rear-mounted 5mm female threaded insert. The threaded inserts
allow you to mount the cube speaker arrays using optional stands or wall-mount
Left Side of
- LFE: the
LFE level control increases or decreases the relative level of low-frequency
effects on movie soundtracks
- Bass: allows
you to increase or decrease the bass level of the Acoustimass module
Input: 15-pin male jack for use with
supplied system input cable. The other end of the system input cable has
tinned wire that connects to the left front, right front, center, left rear
and right rear speaker outputs and a mono male
RCA plug that connects to the subwoofer output of the A/V
receiver or amplifier.
Output: 5 RCA jacks
(Left Front, Right Front, Center Front, Left Rear and Right Rear); using the
supplied speaker cables, these jacks connect to the cube speaker arrays
jack for use with supplied AC power cord
compatible with A/V receivers and amplifiers rated from 10 to 200 watts per
channel, rated from 4 to 8 ohms
Acoustimass Module: W=8.234", H=16.3125",
W=3.065", H=6.184", D=4.079"
The drivers have a 5-year parts and labor warranty, and the electronics have
a 1-year parts and labor warranty.