About the Clarion SRQ1722S
Step up your sound quality
Step up your sound quality
Face it, your factory speakers aren't up to snuff, and your music sounds like it's playing out of an antique table radio. Clarion's SRQ1722S 6-3/4” component speakers can breathe some life back into your tunes. These speakers will offer up a soundstage that'll make you feel like you're in the front row at a show, making your commute much more bearable.
Built to add detail to your music
The SRQ1722S system features two premium 3/4” silk dome tweeters that'll really open up your sound, delivering the high-frequency details that make your music sound convincingly real. Mount each tweeter in a good spot up closer to your ears, and you'll hear a strong stereo image with each instrument clearly defined in the mix. The in-line crossover sends the correct frequencies to the tweeter so it'll stay clear and focused at higher volume levels. The 6-3/4” woofer features a rigid aramid and mica-injected polypropylene cone that won't flex when you're pushing your system, so you'll hear accurate midrange and low-frequency reproduction.
From the Crutchfield Labs:
We had a chance to check out these speakers in the Crutchfield Labs recently. We were very impressed by the imaging offered by this system, and really liked the tweeter's wide-open sound. On the flip side, the system doesn't provide the amount of bass we'd like to hear, so we recommend using these components in conjunction with a subwoofer for best results.
Product highlights:
- package includes two 6-3/4" woofers and two tweeters
- aramid and mica injected polypropylene woofer with rubber surround
- 3/4" silk dome tweeter
- in-line crossover network
- power range: 5-55 watts RMS (400 watts peak power)
- frequency response: 28-35,000 Hz
- sensitivity: 91 dB
- woofer top-mount depth: 2-1/2"
- warranty: 1 year
- MFR # SRQ1722S
What's in the box:
Clarion SRQ1722S owner's manual
- 2 Woofers
- 2 Woofer grilles
- 2 Tweeters (each has a 12" length of wire attached)
- 2 Flush mount tweeter housings (with tweeters installed)
- 2 Angled surface mount tweeter housings
- Two 15' Lengths of wire (each has quick slides on one end and bare wire on the other)
- Two 75" Tweeter wires with in-line crossovers (each has quick slides on one end and bullet connectors on the other)
- Two adapter rings (includes GM/Chrysler 6-3/4G size)
- 2 Flush mount brackets
- 4 Adhesive backed foam pads
- Twelve large 3/4" Self-tapping screws
- Four small 3/4" Self-tapping screws
- Eight 1/4" Self-tapping screws
- Two M4x6mm Machine screws
- Two M3.5x6.5mm Machine screws
- 8 Large speed-clips
- 4 Small speed-clips
- Installation guide (English/ French/ Spanish)
- Warranty information (English/ French)
- On-line product registration information
- Template and specs on box
Customer reviews for Clarion SRQ1722S
Loading...
Loading reviews...
Average review:
4.5 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Clarion SRQ1722S
Features & specs
General | ||
---|---|---|
Speaker Size | ||
Design | 2-way | |
Tweeter Design | 3/4" Dome | |
Impedance (Ohms) | 4 | |
Tweeter Composition | Silk | |
Woofer Composition | Aramid/Mica injected Poly | |
Woofer Surround | Rubber | |
Parts Warranty | 1 Year | |
Labor Warranty | 1 Year | |
Specifications | ||
Sensitivity (1W at 1 meter) | 91 | |
Sensitivity at 2.83 volts | N/A | |
Frequency Response | 28 - 35k Hz | |
Minimum RMS Wattage | 5 | |
Maximum RMS Wattage | 55 | |
Peak Power Handling (Watts) | 400 | |
Top-mount Depth (Inches) | 2 1/2 | |
Bottom-mount Depth (Inches) | N/A | |
Cutout Diameter or Length (inches) | 5 9/16 | |
Mounting Height (Inches) | 0.227 | |
Frame Width | 6.506 | |
Frame Length | 6.506 |
Product Research
Features
Woofer Cones: Each woofer features an injection molded Aramid/Mica Polypropylene compound cone to balance weight and rigidity, resulting in reduced distortion and improved reliability.
Phase Plug: The phase plug helps to reproduce clear vocals with superior transparency by improving the directivity of the mid-range frequencies.
Soft Dome Tweeters: The 3/4" silk dome tweeters offer clean, non-fatiguing sound even under extreme demands.
Tweeter Mounting Options: The tweeters can be flush mounted or surface mounted at an angle using the supplied housings. Once mounted, the tweeters can swivel approximately 10° for optimum imaging.
Tweeter Dimensions:
Frame Width | Frame Length | Cutout Diameter | Mounting Height | Mounting Depth | |
---|---|---|---|---|---|
Flush Mount | 2.2" | 2.2" | 1.804" | 0.35" | 0.875" |
Angled Surface Mount | 1.812" | 1.825" | N/A | 1.65" | 0.65" (Screw Depth) |
Crossovers: The 12 dB/octave high-pass crossovers are wired in-line with the included tweeter speaker wires.
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...
Speakers sound much better than stock, and as always crutchfield provided brackets, wiring, instructions, and next day shipping.
Jon from Madison, VA