From the delicate notes of an acoustic guitar, to the rich tones of an upright bass — Yamaha designed the A-S700 to capture the expressiveness and beauty of your music collection. It delivers 90 watts of dynamic, full-bandwidth-rated power to each of your stereo speakers to provide clear, undistorted sound — even during your music's most demanding peaks. Wide-range frequency response lets you experience all the details on your LPs, CDs, and even high-resolution SACDs and DVD-Audio discs in stereo mode.

Built for high-performance audio
This integrated amplifier boasts a thoughtful, rock-solid design. Yamaha organized the left and right channels into a straight, symmetrical layout, keeping the signal path short and the sound clean. High-end internal components — such as extruded aluminum heat sinks and custom-made capacitors — allow the A-S700 to handle demanding passages effortlessly. An anti-resonant base, rigid center bar, and sleek aluminum front panel provide a sturdy, vibration-resistant housing. And for the purest possible sound, Yamaha gives you direct modes that let you bypass the tone, balance, and loudness controls.

Connections and convenience
The A-S700 offers enough inputs to connect six audio components, including a turntable. Two sets of main speaker outputs let you connect an additional pair of speakers. And the included remote gives you easy control of the amplifier and the other Yamaha audio components in your system.

Product Highlights:

  • 90 watts x 2 channels into 8 ohms (20-20,000 Hz) at 0.02% THD
  • 4-ohm capability allows use with a wide range of speakers
  • ToP-ART (Total Purity Audio Reproduction Technology) for high-quality sound
  • signal-to-noise ratio: 110 dB (CD/DVD Direct Amp mode), 88 dB (phono)
  • 6 RCA audio inputs, including MM (moving magnet) phono input
  • rotary bass and treble controls
  • continuously variable loudness control
  • Pure Direct mode bypasses balance and tone control circuits for cleaner sound from source signals
  • CD/DVD Direct Amp mode bypasses input selector, balance and tone control circuits for cleaner sound from CDs and DVDs
  • headphone jack
  • front-panel switching for 2 pairs of speakers
  • binding-post speaker connectors
  • remote control
  • weight: 22.4 lbs.
  • 17-1/8"W x 5-15/16"H x 15-5/8"D
  • warranty: 2 years
  • Our 60-day money-back guarantee

Everything you always wanted in a stereo receiver, except the radio

An integrated amplifier is essentially a receiver without a built-in AM/FM tuner. You get power to drive your speakers, audio controls, and inputs for music source components. Connect an iPod, a computer, a network music player, or any other device that can play Internet radio, and you may find you have no need for an AM/FM radio.

Yamaha A-S700 Reviews

Average Customer Review:

4 reviews
Review this product
Great Gear Giveaway

Submit a review and then enter to win a $350 rewards card


Review this product:

Thanks for taking the time to share your experiences about this product. Please be sure to focus your comments on the product itself. Read our Review Guidelines for more information.

Your email won't be visible. Please use the email address that is associated with your order.
(e.g., JohnD) Your review will be signed using the display name and location
(e.g., Charlottesville, VA)

Click on a star to rate the overall product on a scale of 1-5
1500 characters left
  Attach a YouTube Review
Crutchfield Video Review Guidelines
  • Only submit videos that you made or are authorized to use.
  • Do not submit videos that contain music, video or visuals that are copyrighted and belong to someone else.
  • Please see our Review Guidelines for more information.
500 characters left
500 characters left

Great Sound. Love This Amp.

Written By Steve K, Valencia CA. on Sunday, February 16, 2014

Crutchfield Customer Review (What's this?)

I love the sound of this amp. Very detailed and clean. Perfect match for my Yamaha CD-N500 CD player. Sounds good playing LPs. If you like up front sound, this amp is for you. I would buy it again.

Pros: Detailed sound and lots of power.

Cons: None.

Simple, Great Sound, Great Value

Written By Tom, San Francisco on Saturday, January 18, 2014

Crutchfield Customer Review (What's this?)

I am playing my music from a Mac Mini in Apple Lossless format (CD quality files). This unit works great, is simple and sounds good at all volumes. It is replacing a much more expensive amp, and sounds just as good.

Pros: Price, simplicity, sound

Cons: none really

Yamaha A-S700

Written By Jeff, USA on Saturday, August 03, 2013

Crutchfield Customer Review (What's this?)

I have owned several entry level integrated amplifiers, some of them very good ones but the A-S700 brings performance to the next level with power, detail and dynamics. I am very impressed with the playback of both CD's and vinyl using the MM phono stage on the A-S700. My B&W 685 speakers sound phenomenal. Highly recommended.

Yamaha A-S700

Written By django, South Bend, IN. on Sunday, July 11, 2010

Crutchfield Customer Review (What's this?)

I owned an integrated amp for 23 years, and was very happy with the natural sound. I started having problems with the right channel and figured after 23 years, it was time to spring for a new one. I tried the NAD C355BEE, but the treble side was a bit dark to my ear. I then ordered the Yamaha and I'm very happy with it. The sound is very defined and natural. I was told by a friend that the Yamaha would be the way to go. I am really enjoying listening to my music and hearing such clarity! The Yamaha A-S700 Natural Sound Amplifier lives up to it's name........

Hands-on research

What's in the box?

Download owner's manual

  • Integrated stereo amplifier
  • 6.5' AC power cord
  • RAS7-WQ06690 remote control
  • 2 "AA" batteries
  • Owner's Manual (Eng/Fre)
  • US Warranty card
  • Canada Warranty card

Features and Specs

Performance Specs
Watts RMS per Channel (8-ohms) 90
Watts RMS per Channel (6-ohms) 105
Watts RMS per Channel (4-ohms) Not given
Frequency Bandwidth 20-20k
THD 0.02%
Minimum Impedance 4 ohms
Signal to Noise Ratio 110
Digital Music Features
Built-in DAC (Digital to Analog Converter) No
High-resolution Audio Playback No
Bluetooth ---
Wi-Fi No
Total Analog Inputs 6
Phono Input Yes
Optical Digital Inputs ---
Coaxial Digital Inputs ---
USB Input ---
Preamp Outputs No
Headphone Output 1/4"
Dimensions and Warranty
Width (inches) 17-1/8
Height (inches) 5-15/16
Depth (inches) 16-1/8
Weight (pounds) 24
Parts Warranty 2 Years
Labor Warranty 2 Years

Product Research

Audio Features
Remote Control

Audio Features

Overview: The Yamaha A-S700 Integrated Stereo Amplifier features a built-in two-channel amplifier with A & B speaker outputs and six analog inputs.

ToP-ART/High Current Amplification: Yamaha uses the ToP-ART (Total Purity Audio Reproduction Technology) design concept, which combines the latest and best technologies, parts, and circuit designs, to maximize sound quality. High Current Amplification uses superior quality components from input to output to achieve high current power with low impedance.

Stereo Amplifier: The Yamaha A-S700 features a highly dynamic, powerful stereo amplifier with low impedance drive capability. The stereo amplifier is rated at 90 watts x 2-channel at 20-20kHz, in 8-ohms with 0.019% THD.

Bass and Treble: The stereo amplifier features independent bass (20Hz) and treble (20kHz) controls so you can increase or decrease the low and high frequency response (+/-10dB).

Balance: You can adjust the sound output balance of the left and right speakers connected to the amplifier.

Loudness: The integrated amplifier features a continuously variable loudness control (0 to -30 dB), so you can retain a full tonal range at any volume level; thus compensating for the human ear's loss of sensitivity to high and low frequency ranges at low volume.

CD Direct Amp: The CD Direct Amp switch is used to obtain the highest sound quality from compact discs by bypassing the input selector, balance and tone control circuits. The CD Direct Amp switch routes input signal directly to the power amplifier from your CD player, regardless of the Input selector setting.

Pure Direct: The Pure Direct switch is used to reproduce the purest source sound by bypassing balance and tone control circuits.

Speaker Selector: The Speaker Selector switch allows you to select only A speakers, only B speakers, A+B speakers, or no speakers; so you can control which speakers are playing.

Impedance Switch: The stereo amplifier features a rear-panel impedance switch to match impedance level of the speakers connected. There are two levels to choose from: High or Low.

  • High: Select High if you use one set (A or B) of speakers with the impedance of 6-ohm or higher. If you use two sets (A and B) of speakers simultaneously, the impedance of each speaker must be 12-ohm or higher. When making a bi-wire connection, the impedance of the speaker must be 6-ohm or higher.
  • Low: Select Low if you use one set (A or B) of speakers with the impedance of 4-ohm to 6-ohm. If you use two sets (A and B) of speakers simultaneously, the impedance of each speaker must be 8-ohm to 12-ohm. When making a bi-wire connection, the impedance of the speaker must be 4-ohm to 6-ohm.

Record Out Selector: The integrated stereo amplifier features a record out selector switch which is independent from the amplifier's input source selection knob. This allows you to record the selected output source while listening to another input source. The unit's volume control does not affect the fixed record level output.

Remote Control

Remote Control: The integrated amplifier comes supplied with an IR remote control for wireless operation of the unit. The remote control can also be used to control select Yamaha audio components such as a CD player or AM/FM tuner. The remote has a range of 20 feet at an angle of 30-degrees left-to-right of the unit's front-panel IR sensor.


Analog Inputs/Outputs: The Yamaha A-S700 integrated stereo amplifier is equipped with six analog RCA stereo inputs for connecting an external audio source such as a CD player, AM/FM tuner, Turntable, and/or cassette deck. There is also two analog RCA stereo outputs for recording through the amplifier.

Note: The unit's Phono input also features a ground terminal and is designed to connect a turntable with an MM cartridge.

Speaker Outputs: The Yamaha stereo amplifier features binding post terminals for its A & B speaker outputs. The speaker outputs are color-coded for easy connection. You can use the A & B speaker outputs to power two pair of separate speakers or you can bi-wire a single pair of speakers.

Headphone Output: The A-S700 integrated amplifier is equipped with a front-panel 1/4" headphone output for connecting a pair of headphones (sold separately). The headphone output and speaker outputs will work simultaneously. You will need to rotate the speaker selector switch on the front-panel to the Off position to turn off the sound from your connected speakers.

AC Outlets: The integrated stereo amplifier features two switched AC outlets to power your other audio components.

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.