About the Blaupunkt GTA 2 Special
Blaupunkt GTA 2 Special amplifier
Enjoy lots of power and superb sound, all wrapped up in a sleek case that'll inject some style into your car audio system. Blaupunkt's GTA 2 Special 2-channel car amplifier dishes out 60 watts RMS per channel, a good choice for driving a pair of full-range speakers or components. Switch this amp over to mono mode, and you can run a subwoofer with up to 160 watts RMS. You can adjust the built-in frequency filters to get the most out of your speakers, while the bass boost will kick up the lows when the craving for bass strikes you.
Product highlights:
- 2-channel car amplifier
- 60 watts RMS x 2 at 4 ohms (85 watts RMS x 2 at 2 ohms)
- 160 watts RMS x 1 bridged (4-ohm stable in bridged mode)
- adjustable high- and low-pass filters (50-250 Hz)
- adjustable bass boost (0-12 dB at 60 Hz)
- preamp inputs and outputs
- 8-gauge power and ground leads recommended wiring and hardware not included with amplifier
- fuse rating: 25A x 1
- 10"W x 2-1/4"H x 9-11/16"D
- warranty: none (Crutchfield's 60-day satisfaction guarantee applies)
- MFR # AAV-GTA2SPECIAL
What's in the box:
Blaupunkt GTA 2 Special owner's manual
- Two channel amplifier
- One 25-amp ATO fuse (installed)
- Four 5/8" Self-tapping screws
- Owner's manual (English/ German/ French/ Spanish/ 18 other languages)
Customer reviews for Blaupunkt GTA 2 Special
Loading...
Loading reviews...
Average review:
4.5 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Blaupunkt GTA 2 Special
Features & specs
Performance | ||
---|---|---|
RMS Power Output (Watts x Channels) |
60 x 2 | |
Peak Power Output (Watts x Channels) | 190 x 2 | |
Power at 2 Ohms (Watts x Channels) | 85 x 2 | |
Power at 1 Ohm (Watts x Channels) | --- | |
Bridged Power (Watts x Channels) | 160 x 1 | |
Minimum Impedance Bridged | 4 | |
Minimum Impedance Unbridged | 2 | |
Minimum Impedance | 2 | |
Best Frequency Response | 10-25k Hz | |
THD at Rated RMS Power | 1% | |
Signal to Noise Ratio | 90 dB | |
Input Voltage | --- | |
Features | ||
Amplifier Class | Not Given | |
Low-Pass Crossover Frequency | 50-250 Hz | |
Low-Pass Slope (dB/octave) | N/A | |
High-Pass Crossover Frequency | 50-250 Hz | |
High-Pass Slope (dB/octave) | N/A | |
Bass Boost | 0-12 dB | |
Bass Boost Frequency | 60 Hz | |
Fan Cooled | No | |
Fuse Rating | 25 | |
Speaker Level Inputs | --- | |
Preamp Outputs | 1 pair | |
Width (inches) | 10 | |
Height (inches) | 2-1/4 | |
Depth (inches) | 9-11/16 | |
Parts Warranty | 60 Days | |
Labor Warranty | 60 Days |
Product Research
Controls
Level Control: rotary gain control; continuously variable from 300 mV to 8 V
Crossover Mode: three position switch; Low Pass, Full (crossover is bypassed), High Pass
High Pass Crossover Frequency: continuously variable from 50 to 250 Hz
Low Pass Crossover Frequency: continuously variable from 50 to 250 Hz
Bass Boost: rotary control; 0-12 dB; centered at 60 Hz
Connections
Power/Ground: screw terminals; 0.5" wide, 8 gauge wire recommended
Remote Turn-on: screw terminal; 0.35" wide
Speaker Terminals: two pair of screw terminals; 0.35" wide
Line Level Input: one pair of stereo RCA jacks
Line Level Output: one pair of stereo RCA jacks
Fuse: one 25-amp ATO fuse
Loading...
Loading accessories...
Customer Q&A
2 questions already asked
Loading...
Loading articles...
Using amplifier to push a POLK AUDIO 8in subwoofer. Very nice, clean sound. The amplifier appears well made and solid. Thank you , Crutchfield...
Alan from Chillicothe, MO