Blaupunkt GT Power 54.2 c
GT Power Series 5-1/4" component system
Item #: 023GTPW542
This item is no longer available.
Original Price: $79.99
- 5-1/4" component speaker system (two woofers, two tweeters, in-line crossovers)
- titanium-injected polypropylene woofer with treated foam surround
- 1" Mylar tweeter
- power range: 2-40 watts RMS (180 watts peak power)
- frequency response: 70-20,000 Hz
- sensitivity: 91 dB
- top-mount depth: 1.8898"
- warranty: none (Crutchfield's 60-day satisfaction guarantee applies)
- Our 60-day money-back guarantee
Why install component speakers?
A component speaker system gives you the best possible performance from your car audio system. A system consists of separate woofers, tweeters, and crossovers, each designed to cover one specific range of frequencies. As separate components, the woofer can move freely to deliver more powerful performance, while the tweeter can be custom-mounted in a better spot up closer to your ears, revealing a whole new world of detail. Separate crossovers are far superior to the simple filters wired into full-range speakers, so the components work together for smoother, more focused sound.
Blaupunkt GT Power 54.2 c Reviews
Average Customer Review:
Good but not very loud
1997 Oldsmobile Cutlass Supreme
Crutchfield Customer Review (What's this?)
I'm pretty new to the stereo world. There's nothing about these speakers on the internet. So I thought I'd take a chance on them. They sound great! Very very clear. They give off a little bass. It's enough to make my side mirrors shake. I have practically no distortion now with any type of music. When I listen to Rock none, Metal none, even Rap or R&B there is none to be heard from these speakers. I replaced one door to hear the difference between these and my stock speakers. The difference was incredible these were so clear. Compared to my stock component speakers. The major this I noticed that I don't like about these is they're not as loud as the stock speakers were. So you're basically trading quality for volume. Installing was a bit of a headache at first the instructions weren't very clear, and they give a lot of extra wire so be prepared to to a little bit of altering if you don't want a lot of excess wiring. i give this only four stars because of the fact they're not as loud as stock speakers are and installing was a bit of a headache.
Pros: Crystal clear sound! Looks awesome!
Cons: Not as loud as the stock speakers were and installing was a headache
What's in the box?
- 2 Woofers
- 2 Plastic grilles
- 2 Tweeters (each has a 4" length of wire attached)
- 2 Crossovers with attached 8' input leads and 28" output leads (the input leads have bare wire and the output leads are terminated with quick-slides)
- 2 Flush-mount tweeter housings (with tweeters installed)
- 2 Angled surface-mount tweeter housings
- 2 Flush-mount retaining clips
- Eight 1-1/4" Self-tapping screws
- Four 5/8" Flat-head screws
- 8 Speed clips
- Woofer template
Features and Specs
|Speaker Size||5 1/4|
|Tweeter Design||1" Semi-dome|
|Woofer Composition||Injected Polypropylene|
|Parts Warranty||60 Days|
|Labor Warranty||60 Days|
|Frequency Response||50 - 22k Hz|
|RMS Power Range (Watts)||2-53|
|Peak Power Handling (Watts)||240|
|Top-mount Depth (Inches)||2 5/16|
|Bottom-mount Depth (Inches)||2 1/2|
|Cutout Diameter or Length (inches)||4 1/2|
Tweeter: Out of the box, the tweeters are mounted in the flush mount housings. An angled surface mount housing is also included, and the back of the the flush mount housing and the top of the angled surface mount housing are combined to make the (non-angled) surface mount housing. Once mounted, the tweeters swivel so you can direct them toward the listening positions.
|Frame Diameter||Frame Width||Frame Depth||Cutout Diameter||Mounting Height||Mounting Depth|
|Surface Mount||1.815"||N/A||N/A||N/A||1.1"||0.63" (Screw Depth)|
|Angled Surface Mount||N/A||1.815"||1.825"||N/A||1.65"||0.56" (Screw Depth)|
Crossover: The crossovers are in-line with the included speaker wire. On the input side the wire is 8' long and terminates with tinned bare wire. The tweeter and woofer outputs are both 28" long and are terminated with quick slides. No crossover frequency or slope information was provided by the manufacturer.
- Length: 1.83" (plus wiring)
- Height: 0.965"
- Width: 1.22"
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.