Skip Navigation

Blaupunkt GT Power 65.2 c

GT Power Series 6-1/2" component speaker system

3 Reviews

Item #: 023GTPW652

This item is no longer available.

Original Price: $79.99

Shop all Component Systems

Overview

Our take on the Blaupunkt GT Power 65.2 c

This GT Power Series 65.2 c component speaker system features 6-1/2" polypropylene woofer cones that deliver accurate, full-bodied sound. Separate Mylar semi-dome tweeters reproduce the vocal and instrumental details smoothly and cleanly. The 3-ohm impedance safely draws a little more power from your car radio or amplifier. And the signature blue color offers a look as distinct as Blaupunkt's legacy sound.

What's in the Box:

  • 2 Woofers
  • 2 Plastic grilles
  • 2 Tweeters (each has a 4" length of wire attached)
  • 2 Crossovers with attached 8' input leads and 28" output leads (the input leads have bare wire and the output leads are terminated with quick-slides)
  • 2 Flush-mount tweeter housings (with tweeters installed)
  • 2 Angled surface-mount tweeter housings
  • 2 Flush-mount retaining clips
  • Eight 1-1/4" Self-tapping screws
  • Four 5/8" Flat-head screws
  • 8 Speed clips
  • Woofer template
  • Instructions

Product Highlights:

  • 6-1/2" component speaker system (two woofers, two tweeters, in-line crossovers)
  • titanium-injected polypropylene woofer with treated foam surround
  • 1" Mylar semi-dome tweeter
  • power range: 2-62 watts RMS (260 watts peak power)
  • frequency response: 40-22,000 Hz
  • sensitivity: 92 dB
  • top-mount depth: 2.2441"
  • warranty: none (Crutchfield's 60-day satisfaction guarantee applies)
  • Our 60-day money-back guarantee
Reviews

Blaupunkt GT Power 65.2 c Reviews

Average Customer Review:

3 Reviews

8 Months Later * Updated Review

Written by: Glitch01 from Montgomery, AL on July 28, 2013

Crutchfield Customer Review (What's this?)

I have to admit I was a bit disappointed about Hobo Joe's experience, and I will agree that the cross overs could have been a bit better, but in my case I did not have any problems. The cut outs and popping sounds like Hobo Joe is having issues with power/signal going to the tweeters. It very well could be the cross overs causing the issues and not issues with the tweeters. I had tested each speaker separately before installation to ensure there wasn't an issue and as a set with the cross over. I would recommend Joe test his tweeters and the cross over separately. 8 months later and no complaints. Multiple passengers have listened to my setup all of which agree the speakers are very clear and crisp and displayed no problems. Audio source: JVC KD-X50BT head unit over bluetooth using a Samsung Galaxy Note 2 Audio encoding: flac, 320 kbps mp3 Music types: Classical, Metal, Punk, Electronica Average time in use ~ 2 hours each day

Pros: Cost/performance

Cons: Modification maybe required

1997 Subaru Legacy GT wagon

Written by: Hobo Joe from Washington, NJ on January 13, 2013

Crutchfield Customer Review (What's this?)

Skeptical about ordering these speakers because of lack of reviews, but figured I'll give it a shot. Man what a mistake. Opened the box and saw the lack of quality especially in the "crossover". Very cheap and flimsy. The woofers arent too bad. The tweeters on the otherhand are horrible. They crackle and cutout. I kick myself for buying these horrible speakers. Can't wait to toss these in the trash and move to either Kenwood, Alpine, or Polk.

Pros: Decent woofers, otherwise nothing

Cons: Tweeters crackle and break up, crossover is flimsy, not a well put together system at all

Honda Accord LX 2000

Written by: Glitched from Montgomery, AL on December 8, 2012

2000 Honda Accord
Crutchfield Customer Review (What's this?)

Great speaker set. Unit comes with in line cross over cables for a pair of tweeters. The tweeters and woofers can almost stand on their own with richness of sound far superior to the stock speakers. These speakers mounted into my front doors with modification. The plastic housing for the stock speakers are too shallow and small for the speakers. You have to toss the plastic housing and cut a new one. I used particle board and cut a mounting bracket that worked wonderfully per someone's suggestion. I drilled three holes to mount the tweeters. The tweeters have two mounts you can use (one that mounts at a slant and one that mounts flat) and are directional. You will need replacement screws for the custom mount. I had some on hand for the wood mount that were long enough and used the three screws from the stock setup to mount the new speakers.

Pros: Comes with long nice cross over cables for your woofer/tweeter setup Good range from the tweeters Nice punch from the woofers Great audio quality for value (by far better than the stock speakers) Visually appealing Low sound distortion when cranked up from head unit alone

Cons: Not a drop in for Hondas

Details

Hands-on research

What's in the box?

Download the Blaupunkt GT Power 65.2 c manual

  • 2 Woofers
  • 2 Plastic grilles
  • 2 Tweeters (each has a 4" length of wire attached)
  • 2 Crossovers with attached 8' input leads and 28" output leads (the input leads have bare wire and the output leads are terminated with quick-slides)
  • 2 Flush-mount tweeter housings (with tweeters installed)
  • 2 Angled surface-mount tweeter housings
  • 2 Flush-mount retaining clips
  • Eight 1-1/4" Self-tapping screws
  • Four 5/8" Flat-head screws
  • 8 Speed clips
  • Woofer template
  • Instructions

Product Research

Features

Woofer Size: The GT Power 65.2 c is marketed as having a 6-1/2" woofer, but it requires a slightly larger opening than a typical 6-1/2" and has a four hole bolt pattern. Be sure to check the Crutchfield Vehicle Selector to confirm fit, and keep in mind that drilling new screw holes may be necessary.

Tweeter: Out of the box, the tweeters are mounted in the flush mount housings. An angled surface mount housing is also included, and the back of the the flush mount housing and the top of the angled surface mount housing are combined to make the (non-angled) surface mount housing. Once mounted, the tweeters swivel so you can direct them toward the listening positions.

Tweeter Dimensions:

  Frame Diameter Frame Width Frame Depth Cutout Diameter Mounting Height Mounting Depth
Flush Mount 2.125" N/A N/A 1.83" 0.344" 0.76"
Surface Mount 1.815" N/A N/A N/A 1.1" 0.63" (Screw Depth)
Angled Surface Mount N/A 1.815" 1.825" N/A 1.65" 0.56" (Screw Depth)

Crossover: The crossovers are in-line with the included speaker wire. On the input side the wire is 8' long and terminates with tinned bare wire. The tweeter and woofer outputs are both 28" long and are terminated with quick slides. No crossover frequency or slope information was provided by the manufacturer.

Crossover Dimensions:

  • Length: 1.83" (plus wiring)
  • Height: 0.965"
  • Width: 1.22"

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Library