Skip Navigation

Blaupunkt THA275PnP

2-channel car amplifier — 75 watts RMS x 2

3 Reviews | 1 question - 1 answer

Add to Cart

Blaupunkt THA275PnP

Overview

Our take on the Blaupunkt THA275PnP

Blaupunkt's  THA275PnP 2-channel amp pushes out 75 watts RMS per channel to your speakers, or can be bridged to drive 190 watts RMS into one sub. This efficient amplifier draws considerably less power than conventional amps, and automatic circuitry eliminates the need for a remote turn-on lead. A direct auxiliary input lets you plug in your MP3 player or navigation device, a big plus if your factory receiver has no aux input.

Little amp, big power

Blaupunkt's THA275PnP 2-channel amp pushes out 75 watts RMS per channel to your speakers, or can be bridged to drive 190 watts RMS into one sub. This efficient amplifier draws considerably less power than conventional amps, and automatic circuitry eliminates the need for a remote turn-on lead. A direct auxiliary input lets you plug in your MP3 player or navigation device, a big plus if your factory receiver has no aux input.

The THA275PnP amplifier produces big power from an ultra-compact housing, so it'll fit into some tight places in your vehicle. This full-range Class D amp uses miniaturized power transformers for cool, efficient operation so your speakers will sound fuller, with clearer highs, richer mids and more powerful bass.

What's in the Box:

  • 2-Channel amplifier
  • Two 20-amp blade fuses (one installed)
  • Speaker quick connect terminals (installed)
  • Power quick connect terminals (installed)
  • Four 1-3/4" Mounting screws
  • Owners Manual (English/German/French/ Italian/Dutch/Swedish/ Spanish/Portuguese/ Danish/Polish/Czech/ Slovak/Greek/Turkish/ Finnish/Russian)

Product Highlights:

  • 2-channel car amplifier
  • 75 watts RMS x 2 at 4 ohms (90 watts RMS x 2 at 2 ohms)
  • 190 watts RMS x 1 bridged output at 4 ohms
  • high-pass/subsonic filter (10-250 Hz)
  • variable low-pass filter (50-250 Hz)
  • full-range Class-D amplifier design
  • fuse rating: 20A x 1
  • preamp-level inputs and outputs
  • auxiliary input
  • removable speaker output and power input connectors included (10--gauge power and ground leads recommended — wiring and hardware not included with amplifier)
  • 6-3/4"W x 1-11/16"H x 7-1/4"D
  • warranty: none (Crutchfield's 60-day satisfaction guarantee applies)
  • Our 60-day money-back guarantee
Reviews

Blaupunkt THA275PnP Reviews

Average Customer Review:

3 Reviews

Efficient little amp

Joakim from CA on 6/5/2009

Crutchfield Customer Review (What's this?)

Great amp, very power efficient. Even at high volume it does not get very hot and power consumption is minimal making installation easy.

Pros:

Cons:

no good

mike from nor cal on 1/25/2008

Crutchfield Customer Review (What's this?)

the only good thing about this amp is the small size. once you turn it up past about 1/2 volume it starts to shut down sounds like a cd skip.

Pros:

Cons:

Excellent Amp, Easy Installation

Dave from West Sacramento, CA on 12/28/2007

This amp and the Blaupunkt Plug-and-Play installation cables are perfectly suited for those that like their car's stock head unit and want to add clean power, yet aren't looking for an excuse to mess around with wiring for power, ground, turn-on, stereo outputs and speaker inputs. The amp's small form factor provide many options for placement. Crutchfield's installation instructions, particularly for calibrating speaker-level input sensitivity, were very helpful. Performance in a stock 2005 Toyota system is excellent. Seamless integration, effortless power, no distortion through listenable sound levels and much more linear sound than the stock head unit. Although I don't use an MP3 player, the amp has a jack for direct AUX input and control.

Pros:

Cons:

Details

Hands-on research

Product Research

Features
Controls
Inputs and Outputs
Dimensions

Features

Terminal Layout: For wiring convenience all the inputs, outputs, and controls are on one side of the amp.

Wire Terminals: The speaker output and power input terminals use removable plugs to attach the wires to the amp. Bare speaker wire, up to 10 gauge for power, ground, and remote and up to 12 gauge for the speakers, is held in place by a set screw, the plug then snaps onto the terminals on the amp.

Direct Aux Input: An auxiliary source (portable, DVD player, navigation system, etc) can be plugged directly into the 3.5mm mini-jack on the amp. Both the auxiliary and main inputs are amplified simultaneously, so the volume of each must be independently adjustable.

Controls

Controls (front of unit):

  • Crossover Switch: turn the low-pass crossover on/off
  • Low Pass Crossover Frequency: rotary control used to select the low pass crossover frequency, continuously variable from 50 to 250Hz
  • High Pass/Subsonic Crossover Frequency: rotary control used to select the high pass crossover frequency, continuously variable from 10 to 250Hz
  • Gain control: rotary control used to set the amplifier's channel gain according the level of the incoming signal, continuously variable from 0.3V to 8.0V

Inputs and Outputs

Inputs and Outputs:

  • Power: the removable power terminal will accept power, ground, and remote bare wire input up to 10 gauge, Blaupunkt recommends 16 gauge wire minimum for power and ground
  • Speaker Outputs: the removable speaker terminal will accept bare wire up to 12 gauge
  • Speaker Inputs: the speaker-level inputs are only useful when integrating the amp with a factory radio using the PnP system (which is no longer available)
  • Line Input: left and right female RCA jacks
  • Line Output: left and right female RCA jacks
  • Direct Aux: 3.5mm mini-jack input

Dimensions

Chassis:

  • Width: 6.732"
  • Height: 1.683"
  • Depth: 6.268"

With Wire Terminals:

  • Width: 6.732"
  • Height: 1.683"
  • Depth: 7.276"

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Accessories
Q & A

Customer Q&A

1 question already asked

You'll need a dedicated power lead run directly from the vehicle battery for this amp. We recommend using at least a 10 gauge wiring kit for this model: http://www.crutchfield.com/g_711/Single-amp-Wiring-Kits.html?tp=635#&nvpair=FFGauge|10-gauge I hope that helps! My Bio: http://www.crutchfield.com/Support/Bio.aspx?bio=5 [ Ryan  May 27, 2016 ]  Staff
Library