Audio Features
Video Features
HD Radio
Network/Internet Functions
USB/iPod Functions
Multi-Zone Capability
Convenience Features
Remote Control

Audio Features

High-Quality Construction: The Denon AVR-3312CI offers a minimum signal path design and direct mechanical ground construction, with independent power supplies for high-quality, audiophile-type sound.

• Minimum Signal Path Design: The simple & straight design concept has been thoroughly implemented in the signal paths to contribute to clean audio and video playback. Signal paths are as short as possible to keep signal degradation in the audio and video circuitry to a minimum.
• Direct Mechanical Ground Construction: Vibration-resistant construction has been used to suppress the adverse influences of vibration on sound quality. The power transformers, a source of vibration, have been securely mounted on the high rigid bottom chassis. Direct mounting of cast-iron feet to the radiator in near proximity to each other serves to suppress mutual vibration with the power transformers and other sources of vibration.
• Independent Power Supplies: The Denon AVR-3312CI employs independent stable power supplies for high-quality sound and picture playback.
• Vibration-Resistant Construction: The vibration-resistant construction thoroughly suppresses the adverse influences of vibration on sound quality, ensuring maximum audio performance.

Equal Power Amp Design: The Denon AVR-3312CI is equipped with a 7 channel power amplifier rated at 125-watts (into 8-ohms, at 20-20kHz, with 0.08% THD, driving 2 channels) that reproduces high-fidelity sound in surround mode with equal quality and power for all channels, true to the original sound. The power amplifier circuit adopts a discrete-circuit configuration that achieves high-quality surround sound reproduction. To faithfully reproduce the original surround sound, each of the Denon AVR-3312CI's seven channels are equipped with its own high-current power amp of equal power. Since these power amps also use discrete circuits configured with parts strictly selected for their contribution to high sound quality, rather than with low-cost integrated circuits (ICs), the surround sound playback is of impeccably high quality.

Amplifier Assignment: The AVR-3312CI supports up to 7.2 channels (Front L/R, Center, Surround L/R, Surround Back L/R, and Dual SW) for surround playback defined by the Blu-ray disc format. The seven amplifier channels built into the receiver are typically used for 7.1 channel surround in the main room, but there are various amplifier configurations to accommodate your home theater setup:

• Normal: The AVR-3312CI is designed to be used as a 7.2ch surround sound receiver with front left/right, center-channel, surround left/right, and surround back left/right channels along with dual preamp subwoofer outputs.
• Bi-Amp: You can configure the amplifier for front bi-amp operation to achieve a higher-quality 2-channel sound by connecting the receiver's front and surround back channels to your main front speakers (if compatible). Receiver will be limited to 5.2ch surround.
• Front B: A second set of front speakers can be powered by the surround back amplifier. Receiver will be limited to 5.2ch surround.
• Front Height: To enjoy Dolby Pro Logic IIz you can reassign the power amp from the two surround back channels to the two front height channels for better front effects.
• Front Wide: To enjoy Audyssey DSX you can reassign the power amp from the two surround back channels to the two front wide channels for better front effects.
• Multi-Zone: The surround back channel amplifier can be assigned to power stereo speakers in Zone2 or Zone3; or the left channel can power a mono speaker in Zone2 and the right channel can power a mono speaker in Zone 3.

Dual Subwoofer Outputs: An additional subwoofer output proves especially useful in large room settings where one subwoofer may not provide adequate low-frequency output.

Dual 24-bit/192-kHz DACs: This receiver is equipped with dual-differential AKM Semiconductor 24-bit/192-kHz (AK5358B) DACs per channel to decode and playback high-resolution recordings with less jitter and clearer sound.

Clock Jitter Reducer: The Denon AVR-3312CI employs a Clock Jitter Reducer to virtually eliminate jitter and produce a sound that is closer to the original soundtrack.

AL24 Plus Processing Technology: Denon's AL24 Processing Plus technology improves information volume in the time axis region using high-speed signal detection and processing technology. In addition to expanding original 16-bit data to 24 bits, AL24 Processing Plus uses data interpolation along the time axis (or up-converted sampling) to achieve natural interpolation without losing the original data. A digital filter is used to further expand adaptability and perform optimum filtering calculations for ringing-free pulse response, pulsive music data and attack sounds. The result is reproduction of such spatial information as the delicate nuances in your music, the positions of the performers, and the breadth, height, and depth of the concert hall.

Denon's proprietary Dynamic Discrete Surround Circuit-HD: The Denon AVR-3312CI is equipped with the latest technology in surround audio performance, DDSC HD, featuring a high-speed 32-bit floating point DSP processor. All elements of the Surround Processor are optimized to the highest standards by the use of selected high performance and discrete components, particularly the A/D and D/A converters and the sophisticated DSP surround decoder.

High-Definition Audio Support: Fully compatible with current HD audio formats, the Denon AVR-3312CI A/V Receiver provides powerful, theater-quality surround sound. The Denon AVR-3312CI features support for Blu-ray high-resolution audio formats, including Dolby TrueHD and DTS-HD Master Audio for a dynamic surround-sound listening experience. These formats play back sound with exceptional fidelity, providing a more realistic listening experience.

Surround Formats: This receiver incorporates a wide variety of surround modes to bring you maximum enjoyment from your audio and video software. The unit can be set to store the most recently selected surround mode for each input, so it is automatically activated each time the particular input is chosen. The surround modes include:

Surround Parameters: You can adjust the following surround mode parameters:

• Dolby Pro Logic II Music Settings: While listening in the Dolby Pro Logic II Music format, there are three further enhancements you can adjust:
  • Panorama: Broadens the front stereo image to the surround speakers to provide a wraparound effect, especially effective when there is limited output from the surround channels, panorama can be turned on/off in the menu.
  • Dimension: Allows you to move the sound field forward or backward.
  • Center Width: Allows you to adjust the width of the center channel.
• Center Image: In the Neo:6 Music mode, the Center Image feature adjusts the output of the left and right channels relative to the center channel, allowing you to make the center channel more or less dominant as needed. This improves the image of the center channel, especially when the listener is off-center. Adjustment varies from 5 (nothing subtracted from the L/R channels) to 0 (L/R channel output is cut in half).
• Denon Original Surround Mode Settings: While listening in one of the Denon Original Surround Modes, there are three further enhancements you can adjust:
  • Room Size: This feature allows you to set the size of your desired acoustic environment when using specific Denon Original Surround Modes; select Small, Medium small, Medium, Medium large, or Large.
  • Effect Level: This function adjusts the effect signal level from 1 to 15 when using specific Denon Original Surround Modes.
  • Delay Time: This feature adjusts the delay time (0-300ms) to control the sound stage size
• Height Gain: Adjust the volume (Low/Mid/High) of the Front Height channels in Dolby Pro Logic IIz.
• Audyssey DSX Settings: While listening in the Audyssey DSX audio format, there are two further enhancements you can adjust:
  • Stage Height: adjust sound stage height (+/-10) when using front height speakers
  • Stage Width: adjust sound stage width (+/-10) when using front wide speakers

Audyssey MultEQ XT: Audyssey MultEQ XT technology helps create an optimal acoustic profile for your home theater. Using the included setup microphone, Audyssey MultEQ XT measures sound levels and adjusts speaker configuration accordingly, making setup fast and easy. This room acoustic measuring and correction system analyzes (via the included microphone) the audio characteristics of your speaker system and your listening environment at up to 8 measurement points and automatically tailors the sound for top audio fidelity. You can set the Audyssey MultEQ XT to one of the following modes.

• Audyssey: Optimizes the crossover point, output level, delay time, and equalization of all speakers based on speaker frequency response, speaker location, and room acoustics.
• Audyssey Bypass L/R: Optimizes all speakers except front left and right.
• Audyssey Flat: Optimizes frequency response of all speakers to flat.
• Manual: Adjusts the tonal quality for each speaker individually using the manual equalizer settings; adjust from -20 to +6 dB at 63 Hz, 125 Hz, 250 Hz, 500 Hz, 1 kHz, 2 kHz, 4 kHz, 8 kHz, and 16 kHz.
• Off: Turns equalizer off.

Dynamic EQ: Audio engineers mix music and movie soundtracks at reference levels much louder than typical home listening levels. At lower volumes the human ear perceives sound differently; voices change, bass dissipates, and the surround effect becomes less enveloping. Dynamic EQ adjusts the frequency response curve based on volume to maintain consistent bass output, octave-to-octave balance, and surround impact, resulting in rich sound at any volume. You can set the Dynamic EQ to 0, 5, 10, or 15 dB.

Audyssey Dynamic Volume: Audyssey Dynamic Volume solves the problem of large variations in volume level between television programs, commercials, and between the soft and loud passages of movies. Dynamic Volume addresses the issue of commercials that are too loud and movie soundtracks with vast differences between soft and loud passages; the results are more intelligible dialogue, loud passages maintain impact, and soft whispers are heard clearly. When the volume level changes, Dynamic EQ also adjusts the frequency response to maintain sound quality. You can set the Dynamic Volume to Day (low), Evening (middle), Midnight (high), or off.

CINEMA EQ (Cinema Equalizer): The Cinema EQ function gently decreases the level of the extreme high frequencies, compensating for overly-bright sounding motion picture soundtracks. Select this function if the sound from the front speakers is too bright. This function only works in the Dolby Digital, DTS, Dolby Pro Logic (including PL II, PL IIx, PL IIz), and DTS Neo:6 modes.

Restorer: Compressed audio formats such as MP3, WMA (Windows Media Audio), and MPEG-4 AAC reduce the amount of data by eliminating signal components that are hard for the human ear to hear. The Restorer function generates the signals eliminated upon compression, restoring the sound to conditions near those of the original sound before compression. It also corrects the sense of volume of the bass to obtain richer sound with compressed audio signals. You can choose from 4 settings:

• Mode 1 (Restorer 64): Optimized mode for compressed sources with very weak highs.
• Mode 2 (Restorer 96): Apply suitable bass & treble boost for all compressed sources.
• Mode 3 (Restored HQ): Optimized mode for compressed sources with normal highs.
• Off: Does not use Restored function.

Dynamic Range Compression (DRC): Motion picture soundtracks have tremendous dynamic range (the contrast between very soft and very loud sounds). For listening late at night, or whenever the maximum sound level is lower than usual, Compressing the dynamic range allows you to hear all of the sounds in the soundtrack with reduced dynamic range. DRC works when playing program sources recorded in Dolby Digital or DTS.

Tone Settings: You can independently adjust the system's overall Bass and Treble settings from -6 to +6 dB. You can also fade the sound from front to rear or vice-versa.

Bi-Amping Front Speakers: The Surround-Back speaker terminals can be reassigned and used along with the Front terminals to bi-amp the front speakers, providing improved bass and treble performance. When bi-amping the front speakers the receiver is limited to a 5.2ch speaker system in the main room.

Source Level: This function adjusts the playback level of the currently selected input source's audio input. Use this feature if there are differences in the input volume levels between different sources. You can correct the playback level of the audio input from -12 to +12dB.

Volume Setting: You can set a maximum volume level of 0, -10, or -20 dB to limit the receiver's total volume output. You can also specify a turn-on volume, from -80 to +18dB or Last (whatever the volume setting when the receiver was turned off).

Muting Level Adjustment: You can set the amount of attenuation for the audio muting circuit; -40dB or -20dB below current volume, or full mute (sound turned off entirely).

Assignable Digital Inputs: The AVR-3312CI features two optical digital (Toslink) inputs and two coaxial digital inputs. Each input can be assigned to any of the different input sources except Tuner.

Phono Input: The Denon AVR-3312CI is fitted with a Phono input (MM), so you can connect your turntable and listen to your vinyl records with high-quality sound.

Speaker Terminals: The receiver has binding post terminals for all speaker outputs (Front L/R, Center, Surround L/R, Surround Back L/R, Front Wide L/R, and Front Height L/R). The binding posts can accept bare wire, pin connectors, and single banana plugs. The terminals are spaced too far apart for dual banana plugs. The collar surrounding the binding post terminals prevent the use of spade connectors.

Multi-Channel Pre-Out: The A/V receiver features 7.2-channel pre-amp outputs (Front L/R, Center, Surround L/R, Surround Back L/R, and Dual Subs). for connection to external power amplifiers.

Headphones: When headphones are plugged into the full-size 1/4" jack on the front panel, all the speakers are automatically muted.

Video Features

HDMI (v1.4) with Dual Outputs: With seven HDMI ver.1.4 inputs (6 rear/1 front), the AVR-3312CI allows you to route multiple high-definition devices--like game consoles and Blu-ray players--to your TV. It also allows you to connect all of your devices to your TV with a single HDMI cable (via its HDMI monitor output x 2), reducing cable clutter. The two HDMI outputs are parallel so the same video signal is output through both and can be used simultaneously. The HDMI inputs are assignable to different input sources. They support HDCP copyright protection and are compatible with 3D signals, ARC, Deep Color, xvYCC technology, Auto LipSync, and HDMI control.

Analog Video Inputs: The receiver features 5 composite video inputs (4 rear/1 front) and one composite video monitor output. There is also two component video inputs and one component video output (60MHz). In addition, there are two S-video inputs (DVR/Dock-Connector). The composite and S-video inputs can be output via composite, component, or HDMI. The component video input can be output via composite, component, or HDMI.

12-Bit i/P Converter and Scaler: The AVR-3312CI is equipped with a flexible video switching system that converts incoming video signals so only one video connection is required from the receiver to the TV. The 12-bit i/p converter and scaler (up to 1080p) provides multi-cadence detection for SD and HD video signals. This means 480i/480p (SD-quality) video signals of DVD programs and other materials input through receiver are scaled to 1080p signals, and output through the unit's HDMI monitor port to your HDTV. The converter and scaler can be turned off independently if you prefer.

• Composite Video: In addition to being output via the composite video monitor output, composite video signals can be converted to component video (480i only) or HDMI (up to 1080p).
• S-Video: S-Video signals can be converted to composite video (480i), component video (480i), or HDMI (up to 1080p). There is no S-Video monitor output.
• Component Video: In addition to being output via the component video monitor output, component video signals can be converted to composite video (480i only) or HDMI (up to 1080p). Only 480i component video signal can be converted to composite video.
• HDMI: Video signals input as HDMI must be output via HDMI (up to 1080p).

NSV (Noise Shaped Video): The NSV precision video feature works in the digital domain to reduce noise in the video signal frequency band in order to enhance video signal linearity, provide the most accurate signal representation, and enhance the picture quality. Noise shaping techniques can be combined with dynamic element matching techniques in order to reduce the matching requirements of DAC elements by converting the analog mismatch into out of band noise. This approach of dynamic element matching and noise shaping has been shown to allow the use of sigma delta modulation at video data rates. NSV is the only product on the market that can achieve ultimate precision with 12-bit fidelity in both digital-to-analog and analog-to-digital domains.

3D Pass-Through: With the advent of 3D media, it is important to own a receiver that recognizes 3D video signals. The AVR-3312CI is able to pass through 3D signals from your Blu-ray player, ensuring that the 3D effect doesn't get lost in translation. It also recognizes signals from 3D television broadcasts. By connecting a 3D-compliant Blu-ray disc player and 3D-compliant TV to the AVR-3312CI, you will have a 3D home theater where you can enjoy high-definition sound and video on a level you've never experienced before.

HDMI Standby-Through: When enabling the HDMI Standby-Through function, regardless of whether the AV receiver is "on" or in "standby" both audio and video streams from an HDMI input will be output to your television, via the receiver HDMI monitor output. You can select between 2 HDMI Through functions modes.

• HDMI Input: Selects the HDMI Input (1-7) for which the HDMI Standby-Through function is enabled.
• Last: The HDMI Standby-Through function is activated on the input source selected at the time of setting the AV receiver to the "standby" mode.

ARC (Audio Return Channel): This feature allows audio to be sent from your compatible HDTV to your receiver through the same HDMI cable already being used to send audio and video to your HDTV. This eliminates the need for extra cables connected to your television.

Deep Color & x.v.Color Support: The AVR-3312CI also supports Deep Color and x.v.Color content, which can display a larger color range than standard-definition schemes. The result is a more lifelike, vibrant picture

Auto LipSync: This feature automatically compensates for the timing shift between the audio and video of the receiver. If needed, the audio signal can be manually delayed to match the video signal; adjust from 0-200ms.

Video Select Function: You can switch the video input source on the receiver while listening to a different audio signal.

Video Mode: You can select between 3 video processing settings.

• Auto: Processes video automatically based on the HDMI content information.
• Game: Always processes video appropriate for gaming content.
• Movie: Processes video normally.

Picture Adjust: You can adjust the picture quality for each video source; Contrast (+/-6), Brightness (0-12), Chroma Level (+/-6), Hue (+/-6), DNR (Low/Middle/High/Off), Enhancer (0-12).

Front Panel AV Input: The front panel's Video Aux input features analog stereo RCA and composite video input, as well as an HDMI input.

HD Radio

Built-in HD Radio Tuner: In addition to receiving standard analog AM and FM broadcasts, the AVR-3312CI features a built-in HD Radio tuner. HD Radio stations offer higher sound quality than conventional FM/AM broadcasts; typically FM HD Radio stations are CD quality while AM HD Radio sound similar to analog FM stereo. It is also possible to receive data services and select broadcasts from among up to eight multicast programs.

HD Radio Technology: HD Radio technology brings digital radio to conventional analog AM and FM radio stations, with improved sound quality, better reception, and new data services. HD Radio technology provides CD-quality sound for FM stations, and FM-quality sound for AM stations. In addition, FM HD Radio station can transmit multiple programs on the same frequency by using multicast channels. Text data display includes station name, song title, artist name, etc.

Station Text: AM/FM digital stations can offer text and data such as artist names and song titles.

Multicasting: Many HD Radio stations also offer more than one channel of programming. This service is called multicasting.

Station Presets: You can store up to 56 radio stations presets (8 stations each in 7 separate banks) and name each preset with an 8 character ID.

Direct Frequency Tuning: You can enter the receiving frequency directly to tune in a station, using the supplied IR remote control.

Network/Internet Functions

Network Connection: The Denon AVR-3312CI is equipped with an Ethernet (RJ-45) port that lets you connect the receiver to your home network (LAN) and your broadband internet provider. When connected to your home network, the AVR-3312CI lets you listen to Internet radio and a host of other online music sources from your broadband internet provider, as well as play audio files & display still images from your computer via its Ethernet (RJ-45) port. The AVR-3312CI also supports AirPlay that lets you stream your music library from an iPhone, iPad, iPod touch, or iTunes. In addition, the Denon A/V receiver is DLNA 1.5 certified for Windows 7 audio & photo streaming.

Internet Radio: The Denon AVR-3312CI lets you access Internet Radio stations from around the world. Internet Radio stations in MP3 and WMA format are supported. You can choose from thousands of Internet Radio stations and sort them by genre and region. You can store up to 56 Internet Radio stations as presets. The unit will automatically save up to 20 of the most recently played stations. The unit will also display Album Art. You can listen to your favorite music through the following Internet Radio services - Napster, Pandora, Rhapsody, and vTuner.

• Napster: The monthly music subscription service Napster is accessible. You can search for particular tracks (by artist, album, or song) on Napster and register your favorite tracks to the "My Napster Library".
• Pandora: Once the network audio player is registered with your Pandora account, you can listen to the automated music recommendation and Internet Radio service. You can create up to 100 personalized radio stations. You can sort tracks within these radio stations. You can skip up to 6 tracks that are being played back within 1 hour.
• Rhapsody: A subscription-based online music service from Real Networks that gives users unlimited access to a vast library of major and independent label music. Within a single interface, Rhapsody provides access to streaming music, Internet radio and extensive music information and recommendations. A subscription is required.
• vTuner: The AVR-3312CI supports the online vTuner service which offers easy browsing of internet radio stations and podcasts. vTuner enables access to web-based radio stations and podcasts via an extremely reliable online database with a wide variety of content. You can browse content by Genre, Location, Language, and Favorites.

Flicker: The AVR-3312CI's network connection supports Flickr. Flickr is an online photograph sharing service that started in 2004. You can use this unit to view photographs on a connected TV that have been made public by Flickr users. You will need to setup an Flicker account to download, upload, and view photographs.

DLNA Certified: The AVR-3312CI is DLNA (Digital Living Network Alliance) 1.5 and Windows 7 compliant for audio and photo networking. This means it's easier for you to access and enjoy digital music and still-images stored on your Windows PC. You can use your PC to play high-bit rate music content through the A/V receiver and view still-images on your connected TV, or use the AVR-3312CI's remote control to browse music & photo files on your hard drive.

Media Player: The Denon AVR-3312CI lets you play music & still-image (JPEG) files stored on your computer via a network connection. MP3, WMA, AAC , WAV, and FLAC audio files stored on your computer can be played through the AVR-3312CI via its wired network connection. You can control playback of your streamed audio files from the A/V receiver's remote control. The receiver also supports ID3-Tag (ver.2) and META tag information - so song title, artist name, and album name can be displayed the unit's front-panel display. In addition the unit will display Album Art on a connected television. The Denon AVR-3312CI supports the following audio formats, sampling frequencies, and bit rates via its wired network connection.

Party Mode Function: The same network audio (Internet radio, Media Player, or iPod/iPhone) can be played on multiple Denon products equipped with the Party Mode function and connected to the same home network. The party mode consists of one organizer and up to four attendees. When one unit starts the party mode as the organizer, up to four devices on which the party mode function is activated automatically participate in the party as attendees.

Software Updates: Using the receiver's network/internet connection, you can check for and update the latest firmware from the online Denon server.

USB/iPod Functions

USB Port: A USB memory device can be connected to the USB (type-A) port located on the front-panel, allowing you to play music files through the receiver and display still-image (JPEG) files on a connected TV. The USB memory device must be formatted in FAT16 or FAT32. The receiver The unit can recognize up to 2,000 folders, and 6,000 files. The receiver also supports ID3-/WMA-tags and Album Art. The Denon AVR-3312CI supports the following audio formats, sampling frequencies, and bit rates via its USB port.

iPod/iPhone Direct: With its built-in USB (type-A) port, the AVR-3312CI supports digital music playback from an iPod or iPhone. Using a USB-to-iPod Dock cable plugged into the front-panel USB port, music can be played directly from your iPod/iPhone, bypassing the iPod/iPhone's D/A converter. The iPod/iPhone can be controlled by the receiver's remote, or you can continue to use the iPod/iPhone's clickwheel or touchscreen. Song/artist information and elapsed playing time appear on the AVR-3312CI's display and on the connected video monitor. Your iPod/iPhone's battery will also be charged while connected to the receiver. The AVR-3312CI is "made for iPod/iPhone compatible" and supports the following iPod/iPhone models and functions via its front-panel USB port (as of October 2011):

iPod/iPhone Video Dock (optional): Using an optional iPod/iPhone video dock (ASD-11R, sold separately), you can view your iPod/iPhone's video and photo through the AVR-3312CI (S-video) on your connected TV (composite video). The iPod/iPhone is controlled using the receiver's remote control or buttons on the main unit.

AirPlay Compatible: AirPlay lets you stream your favorite songs directly from your iPod touch, iPhone, and iPad, or from your iTunes library on your PC or Mac to the Denon AVR-3312CI, over your home network connection. Using the Apple Remote App (FREE download) on your iPod touch, iPhone, or iPad and your wireless home network, you don't even need to be in the same room as the components or your computer to play, pause, skip, and stop the songs in your iTunes music library. You will even see the iTunes music information, including your track titles and artist info via the Denon receiver's on-screen menu.

Multi-Zone Capability

Three Zone/Three-Source: Denon's Multi-Zone/Multi-Source function lets you select different audio/video sources for listening and viewing in different locations of your home. The AVR-3312CI features a Main Zone (audio/video), Audio/Video Zone (Zone 2), and Audio Only Zone (Zone 3). The source can be the same for all zones, or you can enjoy 3 different sources in those zones if you prefer. You can rename each Zone with a 10 character title.

• Main Zone: The Main Zone 1 offers 7.2-channel playback of all your audio/video gear in your main entertainment room.
• Audio/Video Zone 2: The Audio/Video Zone 2 allows stereo audio and video playback of another analog A/V source connected to the receiver in another room of your home via left/right RCA audio or speaker terminal output connections and composite video. Zone 2 features either a preamp-output or speaker terminal output so you can use this amp or a separate amp to power speakers in another room. When using the AVR-33121CI to power speakers in a second room of your home, the main zone is restricted to 5.2-channel. When using the receiver's preamp output terminals for the second room you need an additional amplifier in that room to power those speakers; the main Zone of the receiver remains 7.2-channel
• Audio Only Zone 3: Audio Only Zone 3 allows you to play a third analog stereo audio source connected to the receiver in a third room of your house via left/right RCA audio or speaker terminal output connections. Zone 3 features either a preamp-output or speaker terminal output so you can use this amp or a separate amp to power speakers in another room. When using the AVR-3312CI to power speakers in a second and third room of your home the second and third zone are restricted to mono operation and the main zone is limited to 5.2 channels. When using the receiver's preamp output terminals for the 3rd Zone, you need an additional amplifier in that room to power those speakers; the main Zone of the receiver remains 7.2-channel.

Compatible Zone Sources: Zone 2 & 3 will playback tuner, analog, digital (PCM only), network, and USB sources. Zone 2 & 3 can only playback PCM (2-channel) audio input from the receiver's digital (optical/coaxial) terminals. Zone 2 will only output video from the receiver's composite- and S-Video inputs. You must currently be listening to a USB device or Network audio source in the Main Zone to initially select USB or Network as a source in Zone 2. Then you can switch the Main Zone to any source you desire. You cannot select different AM/FM radio stations or different Network content for different zones.

Incompatible Zone Sources: HDMI cannot be output to Zone 2 or 3. Component video cannot be output to Zone 2. Zone 3 does not output any video sources.

Convenience Features

Simple Controls: With its intuitive button layout, the AVR-3312CI is designed for ease of use. The front panel is smartly organized, featuring clearly labeled buttons and onboard controls for volume and source. The AVR-3312CI includes one-touch Quick Selection buttons that let you instantly select frequently-used video/music sources and surround modes. Icon displays on the buttons make it easy to recognize the buttons' functions.

On-Screen GUI (Graphic User Interface): The AV receiver's on-screen display (GUI) provides quick information about your system's settings (with video overlay). You can easily make settings for your home theater system while viewing menus on the TV screen. Simple settings are enabled with the setting menus displayed on the TV screen. When you control the sound volume, the volume level is displayed on the screen, and when you switch the input source, the name of the input source is displayed These menu displays can be output to your TV via HDMI.

Setup Wizard: The receiver's on-screen Setup Wizards provides easy-to-follow setup instructions.

Rename: You can change the display name (up to 8 characters) of a selected input source.

Source Delete: If an input isn't being used, you can delete it from the display so you don't have to scroll past it when you change sources.

Screen Saver: The Screen Saver function is activated during menu display, USB, iPod, or Tuner screen display - if no operation is performed for an approximately 5-minute continuous period.

Dimmer: The receiver features 4 display settings; Bright, Dim, Dark and Off.

Sleep Timer: This function allows you to automatically set the power to standby after a predetermined amount of time has passed; set the sleep timer up to 120 minutes in 10 minute increments.

Personal Memory Plus: For each input, the receiver automatically memorizes the settings for input mode, surround mode, HDMI output mode, MultEQ, Dynamic EQ, Dynamic Volume, audio delay, etc. When the input source is switched, the settings last used for that source are automatically recalled. The surround parameters, tone control settings, and playback levels for the different output channels are memorized for each surround mode.

Protection Circuit: This is a function to prevent damage to components within the power supply when an abnormality such as an overload, excess voltage, or over-heating occurs. In this unit, the power indicator blinks and the unit enters standby mode when an abnormality occurs.

Remote Control

Multibrand Remote Control: The AVR-3312CI comes with an IR wireless remote control that can operate the receiver as well as other remote control capable components. It is pre-programmed with control signals for other brand products; including DVD players, Blu-ray Disc players, VCRs, TVs, cable boxes, satellite receivers, and CD players. The remote control features Glow keys so it can easily be used in the dark.

Quick Select: The front panel and main remote both have four Quick Select buttons. Each button can be programmed with a specific input source, surround mode, and volume setting for easy recall.

HDMI Control: The Denon AVR-3312CI can control select external audio/video components connected via HDMI which support HDMI control. When you make an HDMI connection with a TV or player compatible with the AVR-3312CI's HDMI control function, you can perform the operations from the AVR-3312CI's remote control - Power off, Switching of audio output devices, Switching of audio input devices, Volume adjustment, and Playback functions.

Custom Integration: The AVR-3312CI carries the CI stamp, which is Denon's certification to custom installers that the receiver has advanced connectivity and control features often required for custom home integration and theater applications using premium control systems. These features include a RS232C jack for use with whole house control systems and remote in/out IR command control.

• RS-232C Port: The AVR-3312CI includes an RS-232C port for connection to external whole-house control systems, from companies such as AMX and Crestron.
• Remote Jacks: The receiver has a mini-jack input and output for use with other compatible Denon components or an external IR repeater.
• 12V Trigger Outputs: The AVR-3312CI has two mini-jack outputs to send a 12-Volt DC turn-on signal to another component that accepts a 12V trigger, such as a power amplifier. The conditions under which each trigger output activates is programmable.

iPhone App Control (Denon Remote App): The Denon Remote App lets you control the Denon Network A/V receiver using your iPhone or iPod Touch (requires iOS 4.2 or later). Four separate screen modes provide access to everything from audio tuning to the networking and switching capabilities of the Denon receiver. For instance, one iPhone App screen lets you control your Denon receiver's basic functions, including power on/off, volume, input selection, surround sound modes, etc. Other screens let you delve deeper into the many features and capabilities of your Denon A/V receiver; from choosing multi-zone networking to content-streaming to tuner commands, radio station pre-sets, balancing the audio soundfield for specific room parameters, and more.