At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere.
That's because we have our own in-house Product Research team — they open the box,
verify contents, check the owner's manual, and record dimensions, features and specs.
We stay on top of new products and technologies to help people make informed choices.
Features
Inputs and Outputs Notes
Features
Class D Power Amplifier:
The compact Class D design draws less current and puts out more raw power so you
can run these amps all day long without worrying about thermal overload.
High-gloss Chrome-plated Finish:
This amplifier has a high-gloss chrome-plated finish. A pair of white cotton
gloves is included with the amplifier to prevent fingerprint smudges when
handling and mounting the amp.
Cooling Fan: This amp has a
built-in air intake and a cooling fan on top, ensuring cool, reliable operation.
Variable Subsonic Filter: The
subsonic filter (variable from 15Hz to 60Hz) allows the amplifier to block
ultra-low frequencies that your subs can't reproduce, improving the efficiency
of your speaker system.
Internal Crossover: The
internal low-pass crossover is adjustable from 50Hz to 150Hz and has a slope of
18dB/octave. The crossover can be turned on or off.
Bass Boost: The bass boost
control allows you to dial-in a 0dB to +18dB gain in bass output, centered at
45Hz.
Optional Remote Control: The optional ABR-100T remote bass boost control allows you to adjust the
bass output from your seat.
Optional Digital Voltmeter:
This amp can be used with an the optional ADM-100T remote-mount digital
voltmeter.
Line Out: The amplifier is
equipped with an RCA line output to send an audio signal to another amplifier in
your system.
Protection Circuitry:
The amplifier has 4-way protection circuitry, which protects the amplifier in
the following cases: overheating, input overload, short circuit, and DC offset.
LED Indicator: The amplifier is
equipped with an LED indicator to let you know that the amplifier is receiving
or power or is in protection mode.
- Power: The LED illuminates
blue when the amplifier is turned "ON".
- Protection: The LED
illuminates red indicating the amplifier has gone into a self-preservation
mode.
Inputs and Outputs Notes
Front of Amplifier:
- Speaker: set screw
terminals that can accept up to 8-gauge wire
- BATT (power): set screw
terminal that can accept up to 4-gauge wire
- GND (ground): set screw
terminal that can accept up to 4-gauge wire
- REM (remote turn-on): set
screw terminal that can accept up to 8-gauge wire
- Low Input: one pair of RCA
connections
- Line Out: one pair of RCA
connections
- Fuses: two 25-amp blade
fuses
Back of Amplifier:
- DVM: phone-type jack for
use with optional remote-mount digital voltmeter
- Remote: phone-type jack
for use with optional remote bass boost control
- High Input: 4-pin male
jack for use with supplied speaker-level input harness
