Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere.
That's because we have our own in-house Product Research team — they open the box,
verify contents, check the owner's manual, and record dimensions, features and specs.
We stay on top of new products and technologies to help people make informed choices.
Black Carbon Injection Cone:
The carbon injected
poly cone is rigid to avoid cone flex, reducing distortion. The cone
is also very light to improve detail and transient response.
Butyl Rubber Surround: The
carbon injected cone and butyl rubber surround combine to offer great durability.
The 2-Layer high temperature ASV voice coil helps avoid the heat build-up that
will damage a speaker in a high powered system.
Tweeters: Each speaker has a dome tweeter for a wide dispersion pattern.
The tweeters can also pivot in their housings about 30° for a more customized installation.
A Polyswitch Circuit provides thermal protection
from the tweeter from being overpowered.
Mounting: The tweeters can be
mounted in the center of the woofers to create a typical coaxial speaker, or they
can be mounted separately using the included flush mount or angled surface mount
housings. The woofers are shipped with the tweeter replacement inserts
installed. Those inserts are easily unscrewed to install the tweeters.
Measurements: Depending on the
method of mounting, the tweeter measurements are as follows:
- Coaxial: Mounting height=0.573"
and Tweeter protrusion=0.204" respectively
- Flush Mount: Depth=0.884", Height=0.288",
Cutout Diameter=1.587", Frame Diameter=2.011"
- Angled Surface Mount:
Width=1.596", Height=1.564", Depth=1.728"
for the tweeters are soldered to the wire terminals on the woofers. The amplifier
is wired to the input terminals on the woofers, then the tweeters are wired to
the output terminals on the woofers. Thirteen inch wires with quick slides are
included for connecting the tweeters.
The speakers can be mounted in a 6-3/4" opening or, using the supplied adapters,
the speakers can be mounted in an oversized GM/Chrysler 6-1/2" opening.