Skip Navigation

Lately, it seems essential to have your small electronic devices like Dock & Play satellite radios, cell phones, and iPods in your car. But it's not always easy to find a spot to mount them. If your vehicle has limited space in which to mount a device, the combination of Pro.Fit's BRAVO mount and miniGRIP holder just might be the perfect solution for you.

The BRAVO gives you a low-profile mounting option that swivels on its base and can be locked into place. The miniGRIP holds any device between 1-3/4" and 3-1/4" wide. Warranty: 1 year.

Product Highlights:

    BRAVO universal mount:
    • low-profile mount fits into tight spaces
    • base is 2" wide
    • swivels 35 degrees, can rotate 360 degrees
    • locking collar locks position
    miniGRIP universal holder:
    • universal holder for portable devices
    • sliding clamp holds your portable device in place
    • support tabs adjust to accommodate several types of power plugs
    • vertical or horizontal mounting
    • secures devices 1-3/4"-3-1/4" wide and up to 4" tall

    Pro.Fit BRAVO/miniGRIP Package Reviews

    Average Customer Review:

    3 Reviews

    Robust device.

    Written by: Nik from Groton, CT on July 11, 2012

    Crutchfield Customer Review (What's this?)

    Device fits iPhone, my old Droid 1. And my new Droid 4.

    Pros: Adjustable, easy to install.

    Cons: Bracket interferes w/ Droid 4 power connector. I had to flip it upside down and move the bottom supports, but I can connect the power if I feed it through the opening in the bracket.

    This works well

    Written by: DriverX from Providence, RI on June 26, 2011

    Crutchfield Customer Review (What's this?)

    This mount works well and holds my iPhone 3GS while it is in the case. Beware of other mounts that only hold the naked iPhone. This one is truly universal!



    bad adhesive tape

    Written by: bob from binghamton ny on April 2, 2011

    Crutchfield Customer Review (What's this?)

    The adhesive did not hold to the dash. did as what the instructions said . will have
    to make it better. other then that nice.



    Hands-on research

    What's in the box?

    Download owner's manual

    • Pro.Fit miniGrip Holder
    • Pro.Fit Bravo Universal Mount
    • T-AMPS adapter plate
    • 4 Machine screws
    • 4 Hex nuts
    • Surface preparation cleaningkit
    • Alcohol pre pad
    • Installation Instructions

    Product Research


    Universal Holder: The Pro.Fit miniGRIP Universal Holder is designed to fit any devices 1 3/4" to 3 1/4" wide, and up to 4" tall. The feet on the bottom are adjustable to allow room for a plug. Its great for small flip phones or gadgets like Blackberrys, Droids or iPhones.

    Universal Mount: The Pro.Fit Bravo Universal Mount (BR-202) is designed to be mounted in one of several orientations on the dash or console of a vehicle. The Pro.Fit Bravo (BR-202) is small, durable, and versatile. It works in any vehicle with its 2" base. The Bravo (BR-202) anchors to your dash or console with 3M adhesive. Its 17mm ball-head all allows you to angle the universal mount. It can pivot 35°and rotate 360°.

    Installation Note: The flex pad with 3M adhesive (on back of the universal mount) is a one-time stick application. Therefore, it is best to determine the mounting position for the Pro.Fit Bravo Mount prior to installing. Once the flex pad is adhered to the mounting surface, it cannot be repositioned.


    • Universal Holder: 2.625" - 4.0625" (wide) x 3.5" (high) x 1.8125" (deep)
    • Universal Mount:
      • Mounting Plate: 1.8125" (wide) x 2.1875" (high)
      • Mounting Base: 2" in diameter
      • Overall Depth: 1.5"

    Our Product Research Team

    At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.