Skip Navigation

Your iPod's a musical necessity, so you might as well have a dedicated spot for it in the car. Pro.Fit's miMount device holder is tailor-made to hold your iPod securely and keep it within easy reach.

You'll need to mate it with a separate Pro.Fit mount to place it in the car — a variety of universal and vehicle-specific mounts are available for applications like this. If you already have a Pro.Fit mount in your vehicle, this holder will work with it. Certain cell-phone mounts will work as well. Warranty: 1 year.

Pro.Fit miMount Reviews

Average Customer Review:

9 Reviews

Pro.Fit miMount

Written by: bmcdonaldii from Lexington, Ky on April 18, 2013

Crutchfield Customer Review (What's this?)

Holds classic iPod and mounts to standard bracketron mounts...

Pros: fits, works, cheap

Cons: none

Pro.Fit miMount

Written by: paul from wyoming on September 12, 2011

Crutchfield Customer Review (What's this?)

when used with a usa spec interface for chevy suburban you have to shave a little off of where the plug goes in, and fit for i pod classic 160 gig a little sloppy otherwise does what it is supposed to do and looks pretty good when mounted.

Pros:

Cons:

Awesome Product

Written by: Devin W. from Gadsden, SC on April 6, 2011

Crutchfield Customer Review (What's this?)

This a great product and works just like it was designed to with one problem. If
your setup includes a dock cable with the push to release tabs on the side
then you will have to use a dremel tool to cut a little bit out of the corners of this
holster. With out cutting the ipod will fit in the dock, but you cannot plug a cable
into the bottom.

Pros:

Cons:

Pro.Fit miMount

Written by: Ross from Manteo, NC on April 7, 2009

Crutchfield Customer Review (What's this?)

Fits the iPod 160GB snugly. My wife's 80GB iPod fits well also, just not as snug. Recommend leaving the sticker off the back once installed if you're using one of the 160GB iPods.

Pros:

Cons:

Pro.Fit miMount

Written by: Manoucher from Alameda, CA on November 22, 2008

Crutchfield Customer Review (What's this?)

I purchased this mount along with an iPod touch mount (MI-750). The miMount works very well with my 160GB iPod classic. As others have noted, it holds the iPod only; that is, no case can be on the iPod. Since I also have an iPod touch, I like to interchange them when on the road. I found that this will also hold my iPod touch - though not as snugly, but does work well.

Pros:

Cons:

Works with iPod 160 GB Classic Video

Written by: Robert from Frederick, MD on October 12, 2008

Crutchfield Customer Review (What's this?)

I used this holder with the ProFit mount in my car. My 160 GB Classic Video iPod fits in this holder, but you have to take it out of the case to slide it in. The only problem I had with it is the stick on pad that covers up the screw holes in the back kinda sticks out a little from the back of the bracket. It made it too tight to slide the iPod in and out (at least for the 160 GB model). Without that pad it slides in and is secure.

Pros:

Cons:

Pro.Fit miMount

Written by: James from Christiansburg, VA on November 9, 2005

Crutchfield Customer Review (What's this?)

I have an iskin case and the ipod will not fit in the mimount w/ the case on

Pros:

Cons:

Sweet, sweet, sweet

Written by: Red from Chicago, IL on August 31, 2005

Purchased this for my iPod 30 Photo, one of the best accessories I have seen for iPod. It fits very snug which is great in my truck. I used the VSM from ProFit too. It was a little more involved install than I was expecting but the whole thing is really sweet. I love it.

Pros:

Cons:

Works great

Written by: Joe from Hauppauge, NY on June 27, 2005

Crutchfield Customer Review (What's this?)

I used this in conjuction with the Pro.Fit LC-70-98 (a bracket that attached to my truck so that I didn't have to drill any mounting holes).

Holds iPod securly and if you have a Ford Expedition, F150 or Lincoln Navigator 97 - up, look at the backet I used. Easy to install, used factory mounting hole and screw and looks real smooth.

Pros:

Cons:

Hands-on research

What's in the box?

Download owner's manual

  • miMount cradle
  • 4 Machine screws
  • 4 Hex nuts
  • 1 Self-adhesive logo badge

Product Research

Features

Compatibility: The miMount cradle is compatible with all 10, 15, and 20 GB iPods, the 30 GB Photo iPod, and the 30, 60, 80 GB video iPods (5th generation iPods) and the 160 GB iPod classic. The miMount cradle must be paired with an optional Pro.Fit mount that is compatible with your vehicle.

AMPS Compatible Hole Pattern: The miMount cradle has an AMPS compatible hole pattern that attaches quickly to a Pro.Fit International VSM or Legend Mount.

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.