Skip Navigation

Keep your phone secure in your car

Looking for an easy way to keep your phone mounted on your dash? Pro.Fit's miPRO 150 device holder features a spring-loaded lower section that'll grip just about any cell or smartphone on the market up to 5.25" tall, including all iPhones. It'll even work with most phone cases, including thicker Otterbox or Ballistic models. The wide placement of the lower supports lets you employ your phone charger while in the car, and you can still access your phone's buttons and jacks.

The rear of the miPRO 150 accepts a 17mm ball, so it'll connect to most Pro.Fit vehicle mounts, including the VSM-G3 vehicle-specific mount, the BRAVO universal mount, and the Universal G3 mount. You won't need any additional hardware or adapters when using the miPRO 150 with these mounts. However, a Pro.Fit adapter plate may come in handy for some installations where a VSM-G3 style mount is unavailable. Warranty: 1 year.

Need a mount? Get a miPRO package!

Crutchfield offers the miPRO 150 in money-saving packages with the Universal G3 mount and the BRAVO universal mount.

Pro.Fit miPRO 150 Reviews

Average Customer Review:

2 Reviews

Pro.Fit miPRO 150

Written by: Wilbur from San Diego, CA on May 17, 2013

Crutchfield Customer Review (What's this?)

Received this after seeing it in the Crutchfield catalog mailed to me. Ordered one to try it out and works very well. The mount can be used on Garmin Suction cup holder so if you already have a Garmin or this mount, you shouldn't need anything else. The back of this mount has a hand tightener that needs to be loosened to get the ball of the suction cup mount inserted. Once the ball is in, you can tighten the back of this mount and still allow it to move a little so that you can adjust the viewing angle. Allows you to connect your audio jack and car charger as well with the adjustable prongs on both ends of the mount. Your phone can be mounted vertically or horizontally.

Pros: Ease of use and cost


Pro.Fit miPRO 150

Written by: Chris from Lewisburg,WV on January 5, 2013

Crutchfield Customer Review (What's this?)

Works great



Hands-on research

What's in the box?

  • ProFit universal holder (miPRO 150)

Product Research


Pro.Fit Universal Holder: The Pro.Fit miPRO 150 universal holder is designed to secure your mobile phone in your vehicle. Its spring loaded lower section allows it to work with almost any mobile phone even with a case. There are adjustable feet on the top and bottom of the holder that lets you customize the holder to fit your mobile phone. The miPRO 150 will work with phones with a case up to 5.25" tall. You will continue to have access to your phone's controls and connections. There are multiple tabs on the back of the holder to secure your mobile phone's cables; such as a power cable or auxiliary cable.

Installation: To insert your mobile phone into the Pro.Fit miPRO 150, place the phone onto the universal holder's supports at the base and press downward; tilt the phone back until captured under top supports.

Pro.Fit Mount Compatibility: The miPRO 150 requires compatible Pro.Fit vehicle mount. The miPRO 150 locks onto the 17mm ball of a VSM-G3 specific vehicle bracket (042VSMG3, sold separately), creating a simple and clean mounting solution for driver convenience. If a VSM-G3 style mount is not available for your vehicle, the TT-39 (042TT39, sold separately) adapter will be required.

Note: Please consult Crutchfield's Outfit My Car to see if there is a VSM-G3 specific vehicle bracket for your vehicle.

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.