Skip Navigation

Pro.Fit's miMount package contains the UltiMount V2 universal mount with the miMount iPod holder — everything you need to mount an iPod in your vehicle.

You can place the UltiMount V2 universal mount nearly anywhere in your vehicle, and its strong 3M adhesive backing will keep it in place. You can remove the backing later without damaging your vehicle's interior. Use the UltiMount V2's pivoting head and swiveling arm to adjust it to virtually any position. The UltiMount V2 works with all of Pro.Fit's extensive line of device-specific holders, including the miMount.

The miMount holds your iPod and attaches to the UltiMount V2, so your music's within easy reach. The miMount is compatible with Click Wheel iPod, iPod photo, iPod video, and iPod classic. Lifetime warranty.

Pro.Fit UltiMount V2/miMount Package Reviews

Average Customer Review:

5 Reviews

Not the greatest

Written by: Angeladte from Hanover, PA on March 11, 2013

Crutchfield Customer Review (What's this?)

I could not get it to stay and then I tried to may times and it lost the stick. No Good.



Pro Fit

Written by: Waipahukane from Waipahu Hi. on September 1, 2012

Crutchfield Customer Review (What's this?)

It took me about 30 minutes to figure out the best place to install it. It fit perfectly on top of the consoul just under the dash below the radio & air contitioner dials.

Pros: Very easy to install.. I can adjust it so I get the best view.

Cons: None so far..........

Pro.Fit UltiMount V2/miMount Package

Written by: Don K. from Lakewood Wa. on September 21, 2010

Crutchfield Customer Review (What's this?)

The Pro.Fit Utility Mount Is a great product when it comes to how you can mount it and how well it holds and looks. The down side of is that it was not properly researched. I had to modify it in the area where the Aux.output on the bottom of the cradle is in order to plug it in. Also the same for the wide cradle pluggin. If you didn't carve some of the plastic back your I-Pod Touch won't stay flush in the cradle.



Absolutely Amazing, but......

Written by: tony from Newfane, VT on March 16, 2010

Crutchfield Customer Review (What's this?)

I bought this mount about a month ago and it is simply amazing! I have reversed the
arm, moved it up and down, swiveled the iPod holder and everything and it gives you
countless mounting options. The only problems I have with it is the adhesive pad did not
hold to my vehicle's dash board even after cleaning and prep'ing the area. This may be
due to the cold weather or the dash was still dirty. The other issue I have with it is that I
use it with my iPhone and it hits the volume buttons on the side of the phone. once I
have the phone plugged into my stereo, it doesnt matter much, its just annoying having
to turn the ringer back up every time I take it out of the cradle. I still give this mount 5
stars and recommend this product to any and everyone who is looking for a mount for
their iPhone or iPod touch!!!!



Excellent Product

Written by: Karl from Yonkers, New York on September 23, 2008

Crutchfield Customer Review (What's this?)

A perfect mount for the Ipod. The installation was easy. Just make sure you don't try to be too quick with the installation. Let the adhesive sit for at least 24 hours. Once it sets, you are good to go. I have 2 mounts in my truck (1 for the Ipod and 1 for my phone). It has been 4 months and they haven't budged one bit. Great product.



Hands-on research

What's in the box?

Download owner's manual

  • miMount device holder with UltiMount V2 base
  • Self-adhesive logo badge
  • Surface preparation packet
  • Alcohol prep pad
  • Installation instructions

Product Research


Mounting Location/Compatibility: This Pro.Fit miMount with UltiMountV2 is designed to mount in any of several orientations and locations in any vehicle or boat. The miMount can be used to mount a full-sized iPod, such as the iPod classic and iPod touch.

Mounting Options: The UltiMountV2 can provide multiple mounting options. Since the UltiMountV2 attaches with an adhesive pad, no drilling is necessary. If desired, the round adhesive FlexPad can be removed and placed on the opposite side of the extension arm. The UltiMount has a ball-and-socket adjustment that gives you great flexibility in positioning your device. Once positioned, you can lock the UltiMount to hold it in place.

Flex-Pad: The UltiMountV2 adheres to the mounting surface with the Flex Pad featuring a strong 3M adhesive. The mounting surface will need to be prepared prior to mounting the Flex Pad. The supplied Surface Preparation Cleaning kit and Alcohol Prep pad will remove dirt, oils, and silicone-based emulsions (such as Armor-All) from the mounting surface to assure a secure installation. To allow you to move the UltiMountV2 to another vehicle, you can purchase additional Flex Pads (item # 042747FP10).

miMount: The miMount is designed specifically for use with the full-sized iPod, including the iPod classic and iPod touch. The miMount is made of molded plastic that keeps your iPod secure, and gives you full access to connections and controls.

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.