Skip Navigation

It's not always easy to find a spot to mount your iPod touch. This Pro.Fit package combines an UltiMount V2 universal-fit mount with a miTouch holder to give you lots of mounting options for your iPod touch.

Attach the V2 mount to your dash or other convenient spot. The adhesive pad on its base attaches securely to the mounting surface, and won't damage the material beneath if you need to remove it. The UltiMount V2's extension arm puts your device within reach and can be swiveled, rotated, and adjusted to nearly any position.

The miCradle mount attaches to the V2 mount and holds your iPhone. The V2 mount swivels 30 degrees on its base, and comes with a 90-degree "L" bracket, so your iPod touch always sits at the correct angle. Lifetime warranty.

Note: This mount is not compatible with the iPod touch (4th gen) or any generation of iPhone®.

Pro.Fit iPod® touch Package Reviews

Average Customer Review:

1 Review

Problems with the iPod 2nd Generation

Written by: Adam from NW Burb of Chicago on April 10, 2009

Crutchfield Customer Review (What's this?)

Here's the low-down...

The iPod 2nd Gen changed their pin configuration so if you have an older iPod cable it will NOT charge your iPod, you'll need a separate adapter. I purchased that adapter and not only does it add another 1-1/2", but it also wont allow you to plug it in because the adapter is wider than the bottom cut out on the holder. I also wouldnt try putting in the iPod upside-down since it could slip out over bumpy roads, plus it also pushes in the side volume buttons so the volume icon flickers on the screen.

Another problem is that they didnt make room for the headphone jack, since the main iPod plug doesn't provide audio. Either you have to elevate the iPod in the holder whatever the height is of the headphone plug, or drill a notch so it sits flush.

Bad design overall.

( It could be intended for the 1st Gen iPod, but I never had one so I wouldn't know )



Hands-on research

What's in the box?

Download owner's manual

  • miTouch iPod touch holder with UltiMountV2 base
  • Self-adhesive logo badge
  • Surface preparation packet
  • Alcohol prep pad
  • Installation instructions

Product Research


Mounting Location/Compatibility: The Pro.Fit miTouch with UltiMountV2 is designed to mount in any of several orientations and locations in any vehicle or boat. The miTouch is designed specifically to hold the Apple iPod touch (1st/2nd/3rd gen).

Mounting Options: The UltiMountV2 can provide multiple mounting options. Since the UltiMountV2 attaches with an adhesive pad, no drilling is necessary. If desired, the round adhesive FlexPad can be removed and placed on the opposite side of the extension arm. The UltiMount has a ball-and-socket adjustment that gives you great flexibility in positioning your device. Once positioned, you can lock the UltiMount to hold it in place.

Flex-Pad: The UltiMountV2 adheres to the mounting surface with the Flex Pad featuring a strong 3M adhesive. The mounting surface will need to be prepared prior to mounting the Flex Pad. The supplied Surface Preparation Cleaning kit and Alcohol Prep pad will remove dirt, oils, and silicone-based emulsions (such as Armor-All) from the mounting surface to assure a secure installation. To allow you to move the UltiMountV2 to another vehicle, you can purchase additional Flex Pads (item # 042747FP10).

miTouch: The miTouch is specifically designed for the Apple iPod touch (1st/2nd/3rd gen). It is made of molded plastic with felt pads on the back of the cradle. All connections and controls are fully accessible.

Note: This mount is not compatible with the iPod touch (4th gen) or any generation of iPhone.

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.