Skip Navigation

The Pro.Fit Universal G3 mount provides a secure base for placing a portable electronic device in your vehicle. It mounts with a special automotive adhesive that won't mar your dashboard or console, and can be removed without leaving any residue.

Pro.Fit includes a special "A Plate" platform for mounting a Pro.Fit device holder that'll hold an iPod®, plug-and-play satellite radio, or other portable. The Universal G3 also features a molded ball at its tip which fits a Garmin nüvi portable navigator perfectly, allowing you to adjust your navigator easily for the best possible view. Warranty: 1 year.

Pro.Fit Universal G3 Reviews

Average Customer Review:

1 Review

Great solution for mounting a Garmin unit

Written by: MikeM from Salina, KS on February 3, 2013

Crutchfield Customer Review (What's this?)

Purchased to mount a 4.3" Garmin Nuvi in the dash bin above the radio on a Suzuki Equator. The bin has a series of small bumps on the bottom, but this did a nice job of sticking to the surface. Great elevation for the Garmin unit. Simple to install, no holes to drill, and can be removed (per directions) later if I change my mind on where it goes.

Pros: Easy install, no holes to drill

Cons: Not really a con, but make sure you know where you want to put it exactly before you stick it down, because it isn't moving again once it's stuck.

Hands-on research

What's in the box?

Download owner's manual

  • Universal G3 mount J stem
  • A plate
  • Surface Preparation Cleaning Kit
  • Alcohol Prep Pad
  • Installation Instructions

Product Research

Features

Mounting Location: This Pro.Fit Universal G3 is designed to mount on either the dash or console of a vehicle.

Compatibility: This Universal G3 mount is designed to fit any vehicle.

Mounting Options: The Pro.Fit Universal G3 allows you to mount your hand-held electronic device in your vehicle within easy reach. Once mounted, the G3's molded rubber ball allows you to pivot, twist, angle, extend, or remove your electronic device. It can be used as a stand-alone mount with Garmin nüvi GPS units, or with the supplied A Plate. The A Plate has a socket for the G3 ball on one side and a 2" square flat mounting surface on the other side. There are 4 screw holes with spacing between 1-1/8" and 1-1/2" (compatible with the standard AMPS hole pattern).

Surface Preparation: A Surface Preparation Packet and Alcohol Prep pad are included for preparing the mounting location. The Universal G3 mount should be mounted to a clean, flat surface.

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.