Skip Navigation

Q-Customs Factory-fit Subwoofer Enclosures

1997-up Dodge Dakota Club Cab Truck

6 Reviews

Find what fits your vehicle

Can't find your exact vehicle?

Item #: 044CDDX108

In Stock

Add to Cart

Ships Free From Manufacturer

Ask an expert

Our VA-based experts can help.

1.888.955.6000

ChatEmail

Add to Cart

149.99

Overview

Our take on the Q-Customs Factory-fit Subwoofer Enclosures

Designed to give you factory fit and finish plus great sound and durability, this Q-Customs enclosure by Q-Logic holds one 8" Type 1 subwoofer and fits in the storage well underneath the rear seat on the driver's side of your 1997-and up Dodge Dakota Club Cab Truck. It conforms perfectly to the shape of that area. The seat will rest at a slight angle after the installation is complete, so the package includes an accessory tray for the other side of the split bench that raises it to the same angle.

Designed to give you factory fit and finish plus great sound and durability, this Q-Customs enclosure by Q-Logic holds one 8" Type 1 subwoofer and fits in the storage well underneath the rear seat on the driver's side of your 1997-and up Dodge Dakota Club Cab Truck. It conforms perfectly to the shape of that area. The seat will rest at a slight angle after the installation is complete, so the package includes an accessory tray for the other side of the split bench that raises it to the same angle.

The photo shows how well this enclosure integrates with the interior of your vehicle. It looks like original equipment, but gives you deep, pounding bass no factory sound system can touch. Internal volume is 0.35 cubic feet. 1-year warranty.

Please check with us before purchasing by using the vehicle selector on our site, or calling a Sales Advisor at 1-888-955-6000 to verify fit information.

Compact, clean design, sounds very good. Overall, no complaints.

Ruffdawg, the Washington, DC Area

What's in the Box:

  • Custom 8" subwoofer enclosure with black exterior
  • Black plastic tray
  • Eight 1" self-tapping screws
  • Four 2" self-tapping screws
  • One 2' length of speaker wire (terminated with female quick-slides and connected to the terminal on the other end)
  • Polyester fiber batting
  • Instruction sheet.
Reviews

Q-Customs Factory-fit Subwoofer Enclosures

Average Customer Review(s):

(6 Reviews)

Q-Customs Factory-fit Subwoofer Enclosures

Anonymous from Colorado Springs, CO on 11/2/2016

2003 Mitsubishi Outlander
Crutchfield Customer Review (What's this?)

Pros- * Very clean looking * Very high quality * Installation was very easy * Comes with speaker wire, foam tape, hardware, and instructions Cons- * Limited selection of 8" subwoofers that will fit (I was able to easily fit a Planet Audio DVC subwoofer, but subs with deeper magnets may have space issues) * Included speaker wire isn't the best * Included polyfill doesn't seem nearly enough based on internal cubic feet measurements Tips- * Line the tool tray with sound dampener to minimize any resonance or rattling * Pack the enclosure with additional polyfill if needed * Pre-drill the 4 corner pilot holes with the enclosure outside of the vehicle * Take an extra couple minutes and remove the 4 bolts/screws that hold the folding seat pad to the hinges, this will give you clear access to the back 2 holes on the enclosure. * The additional under seat tray for the passenger side can either be screwed down, or you can lay down some felt tape and let it rest under the weight of the passenger folding seat for continued access to your jack/tools/etc. How does it sound? About what you would expect from an 8 inch subwoofer hiding under a seat. I am running a 400w rms subwoofer and sound reproduction is decent, very tight and punchy, LOTS of vibration transfer through the cab, but lacks the ability to really hit low frequencies. If Qlogic would offer an enclosure that could house a 10" subwoofer, or find a way to include a tuned

Pros:

Cons:

Q-Customs Factory-fit Subwoofer Enclosure

Ruffdawg from the Washington, DC Area on 8/27/2015

Compact, clean design, sounds very good. Overall, no complaints.

Pros: Compact, Not visible, Tight bass.

Cons: Enclosure needs to be able to accomadate a 10" sub insted of 8".

Q-Customs sub box for '02 Dakota

TimberWolf from Eastern PA on 5/8/2011

Crutchfield Customer Review (What's this?)

Overall fit was good - but the Rockford Fosgate Dual Voice Coil sub I chose contacts the sloped bottom / side of the box. Since both the box and the Dodge compartment are thick plastic, some "custom" work with a heat gun produced the desired clearance. As another owner posted, I only used 2 screws for the install - but I applied a few beads of silicone adhesive to the bottom and rear of the box to insulate against any buzzing from vibration. I'm pleased with both the investment and the sound quality - but it would be helpful if the maximum sub woofer basket dimensions for the box were noted.

Pros:

Cons:

Money well spent

carl from Virginia on 4/4/2008

2004 Dodge Dakota
Crutchfield Customer Review (What's this?)

This is a great product and a great idea. The unit mounts under the rear seats leaving it "out of sight" and "out of mind" of would-be perpetrators. I have a JL sub installed in mine powered by an inexpensive Profile amp. The sound is awesome! Don't waste your time thinking about anything else. The box is expensive (more than my amp and sub combined) but given its intelligent design well worth the money. MTX makes something similar preloaded with two 10's but from the looks of it you lose the space to store your jack, plus you can pair this unit with a sub/amp combo for a couple hundred less. A few ditties about the box: You can not mount a sub with a humongous back end. I originally purchased a JBL sub that would not fit. However, I think most others will probably mount just fine. If you run into a problem Crutchfield is awesome (as they always are) and will switch you out for a different sub. Lastly, I was only able to mount this thing using the two front screws due to irregularities in the box, the truck tray it mounts on top of, or both. Regardless, there's no effect on the sound. It's the only reason I rated this item a 4 and not a 5. Otherwise, money well spent!

Pros:

Cons:

Q-Customs Factory-fit Subwoofer Enclosures

Dan from Rapid City SD on 3/4/2008

1999 Dodge Dakota
Crutchfield Customer Review (What's this?)

Fits great, Looks stock, Rocks loud. Would be nice to fit a larger speaker but very well designed for the space. Due to the sharp taper on the back the large basket on many woofers may contact the box. I installed the Polk Audio db840 running 150 watts.

Pros:

Cons:

Q-Customs Factory-fit Subwoofer Enclosures

Jeff from Pittsburgh,Pa on 3/21/2005

This box fits perfect in my club cab Dakota.I put a Rockford Fosgate Stage 2 sub in.This enclosure rocks the truck.Great bang for the buck and no lost space in the truck and it is all consealed.Everyone always ask were the sound is coming from.

Pros:

Cons:

Details

Hands-on research

Product Research

Features

Compatibility: The enclosure is designed to fit under the rear seat on the driver's side in 1997-up Dodge Dakota extended cab trucks. The black enclosure is color-matched to the factory interior. Please check the Crutchfield Vehicle Selector for vehicle compatibility.

Materials: The enclosure is made of molded poly resin with a 5/8" MDF (medium-density fiberboard) top panel for mounting the woofer. The bottom of the enclosure is molded to fit the contour of the vehicle's rear floorboard. The supplied plastic tray (W=17-9/16", H=2-13/16", D=11-625") installs on the passenger side over the jack storage area.

Hardware: Eight 1" self-tapping screws are provided for mounting the woofer to the enclosure. In addition, four 2" self-tapping screws are included for securing the woofer to the vehicle (holes are pre-drilled in the enclosure for the 2" mounting screws).

Recommended Woofers: This is a "Type 1" enclosure, made for use with an 8" driver designed for small sealed enclosures. The internal volume is 0.35 cu/ft.

Terminal Cup: There is a single terminal cup with two spring loaded binding posts, capable of accepting bare or tinned wire, pin connectors, banana plugs or dual banana plugs. The enclosure is meant to be used with a bridged or mono amplifier.

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Accessories
Q & A

Customer Q&A

Library