Skip Navigation

Q-Customs Factory-fit Subwoofer Enclosures

1994-2000 Dodge Ram Extended Cab trucks
Single 12" enclosure (1994-95, red)

2 Reviews | 2 questions - 3 answers

Item #: 044CDTX35

In Stock

Add to Cart

Ships Free From Manufacturer

Ask an expert

Our VA-based experts can help.

1.888.955.6000

ChatEmail

Overview

Our take on the Q-Customs Factory-fit Subwoofer Enclosures

Designed to give you factory fit and finish plus great sound and durability, this Q-Customs custom-fit enclosure by Q-Logic holds one 12" Type 1 subwoofer (and two beverages, thanks to the cupholders!), without sacrificing any space.

Designed to give you factory fit and finish plus great sound and durability, this Q-Customs custom-fit enclosure by Q-Logic holds one 12" Type 1 subwoofer (and two beverages, thanks to the cupholders!), without sacrificing any space.

The photo shows how well this enclosure integrates with the interior of your vehicle. It looks like original equipment, but gives you deep, pounding bass no factory sound system can touch. Internal volume is 0.85 cubic feet. Warranty: 1 year.

Please check with us before purchasing by using the vehicle selector on our site, or calling a Sales Advisor at 1-888-955-6000 to verify fit information. Choose the color that matches the model year of your vehicle.

Fits perfectly, didn`t have to mount to floor. The fact that it doesn't look like a speaker box helps with concealment of speaker. Great bass with the Punch sub I added. I highly recommend if your looking for a sub box for this model of truck. No Regrets !

kerry, flintville, TN

What's in the Box:

  • One 0.85 cu/ft custom 12" subwoofer enclosure with red top and side fascias
  • 8-1" self-tapping screws
  • 1-22" length of speaker wire (terminated with female quick-slides on both ends)
  • 1-piece of polyester fiber (20" x 24")
  • instruction sheet.
Reviews

Q-Customs Factory-fit Subwoofer Enclosures Reviews

Average Customer Review:

2 Reviews

perfect fit

Written by: kerry from flintville, TN on February 15, 2016

1995 Dodge Ram 1500
Crutchfield Customer Review (What's this?)

Fits perfectly, didn`t have to mount to floor. The fact that it doesn't look like a speaker box helps with concealment of speaker. Great bass with the Punch sub I added. I highly recommend if your looking for a sub box for this model of truck. No Regrets !

Pros: perfect fit, concealment, excellent bass with Punch sub I added, looks great my friends ask where is the woofer

Cons:

Works great

Written by: MarcusD from Texas on February 22, 2015

Crutchfield Customer Review (What's this?)

This is a very good product, fits perfectly and doesn't move even without bolting it in. The only problem I have is that the cupholders only fit a 12oz can, guess nobody ever thinks of fountain drinks

Pros:

Cons:

Details

Hands-on research

What's in the box?

Download the Q-Customs Factory-fit Subwoofer Enclosures manual

  • One 0.85 cu/ft custom 12" subwoofer enclosure with red top and side fascias
  • 8-1" self-tapping screws
  • 1-22" length of speaker wire (terminated with female quick-slides on both ends)
  • 1-piece of polyester fiber (20" x 24")
  • instruction sheet.

Product Research

Features

Compatibility: The enclosure is roughly wedge shaped with red plastic top and side plates, and it`s bottom is contoured to follow the shape of the floorboard in 94`-98` Dodge Ram full-size extended cab trucks. This enclosure fits under the center portion of the rear seat and extends forward to the backside of the front seat(s). Two cup holders (each has a 2.75" diameter opening) are molded into the top of the enclosure. The top front "corner" of the enclosure is curved/recessed to allow the factory front seat armrest/console to fold up/down without obstruction. The plastic fascias are colored to match the "red" interior found in some 94`-95` Dodge Ram full-size extended cab trucks. Check the Install Guide for applicable vehicles.

Cosmetics: The enclosure`s top and sides are finished with "red" molded plastic fascia plates with a wrinkled surface pattern. The main body of the enclosure is made of particle board covered with medium grey/black box carpet. The enclosure has an integrated molded black plastic base that is shaped to allow the enclosure to follow the floorboard contour of the above mentioned vehicles.

Cup-Holders: Molded into the portion of the enclosure top that extends from the front edge of the back seat to the backside of the front seat(s), there is two cup holders (each has a 2.75" diameter opening).

Wiring: The input terminals are gold plated 5-way binding posts with plastic wire retaining nuts. The wire supplied to connect the terminal cup to the woofer is terminated at both ends with 0.210" female quick slides.

Mounting: Even though the enclosure will be held in place by the back seat, transmission hump and the backside of the rear seat, Ai Research recommends permanently securing the enclosure to the vehicle. No mounting brackets are included, so, to permanently attach the enclosure to the vehicle, a bracket kit (item 125B702KIT) will be needed or brackets and screws may be purchased from a hardware store. Bracket mounting requires drilling and screwing into the vehicle and enclosure.

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Accessories
Q & A

Customer Q&A

2 questions already asked

Thank You. [ Max  Jun 16, 2014 ]
No, you will have a little bit looser base. . .not as tight with the slightly larger box. [ RICHARD  Jun 10, 2014 ]
We have not received any answers from other customers on your question. I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. They should be able to help answer your question. [ Jeff  Jun 12, 2014 ]  Staff
Library