Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere.
That's because we have our own in-house Product Research team — they open the box,
verify contents, check the owner's manual, and record dimensions, features and specs.
We stay on top of new products and technologies to help people make informed choices.
Compatibility: This enclosure is designed to work with a single 10" woofer.
It is a Type 1 enclosure with an internal volume of 0.65 cu. ft., and is
designed to be used only as a sealed enclosure.
box is constructed of 5/8" MDF (medium-density fiberboard). MDF resists flexing and has
For strength, Q-Logic uses a full dado groove on the front, back, top, and
bottom panels. The side panels are glued, then locked into these grooves. The
edges of the front, back, top and bottom are mitered joints, so there's 50% more
surface area for the special glue that bonds them. The side and front panel are
framed with a hard plastic frame. The side panels of the box
are recessed 0.5" from the outer edges of the frame. The shape of the enclosure
better utilizes space behind the seat of a pickup truck by allowing you to put the enclosure against the
angled back of the seat and against the back of the cab. The enclosure is covered with durable gray carpet.
The QXs-Ring is a multi-diameter woofer mounting adapter which also seals the
woofer into the enclosure. The QXs-Ring has a series of rings around the outside
to help center the woofer, and hash marks to help align the woofer's mounting
holes. If the mounting diameter of the woofer is 9-1/8" or less, the
woofer can be installed without trimming the ring. For woofers with a larger mounting
diameter, a portion of the QXs-Ring can be trimmed off, allowing for an extra
1/4" in woofer mounting diameter.
Hat": Mounted to the
rear of the enclosure, the External Top Hat is an oval-shaped plastic insert
which extends the woofer mounting depth by nearly 3/4", allowing more woofers to
fit into the enclosure. The cutout for the insert is 7-1/2" wide and 6" high.
The external panel is 9-3/8" x 7-5/8" (oval), but protrudes less than 1/4" from
the back panel.
The spring posts, located on the left side of the enclosure, will accept bare wire,
pin connectors, banana plugs, and dual banana plugs. The enclosure is equipped
with a 30" speaker wire for connecting the woofer to the inside terminals.
Brackets: Brackets (not included) are recommended for more