Features

Marine & Powersports Tower Speaker: The NT1 marine and powersports tower speaker is designed to sound great while playing very loud in the outdoors on your boat or off-road vehicle. The tower speaker's enclosure is sealed against the elements and features internal steel reinforcement for strength. The tower speaker features water resistant (IPX67) components; including titanium tweeter, polypropylene woofer, and rust-resistant internal connectors. The tower speaker even offers built-in illumination with a pre-programmed demo mode.

Titanium Tweeter: The NT1 tower speaker features a 1" Titanium dome tweeter which delivers a very smooth musical response and high output with minimal required amplifier power.

Polypropylene Woofer: The NT1 tower speaker features a UV protected, water resistant 6.5" composite polypropylene cone with temperature stable Butyl rubber surround mounted on a lightweight composite frame. The woofer's voice coil is high temperature copper, wound on a Kapton former which allows the voice coil to handle more power while remaining light in weight. Its high energy strontium ferrite magnet provides higher output with minimal amplifier power. This woofer design delivers deep bass & high volume while being protected from sun, sand, & water spray.

Marine Certified Crossover: The NT1 tower speaker utilizes a conformal coated, Butterworth 12dB per octave crossover with PTC  (Positive Thermal Coefficient) tweeter protection.

Injection Molded Enclosure & Grille: The NT1 tower speaker is built to last with a heavy-duty ABS cast enclosure that features steel reinforcements. This ruggedly design enclosure is sealed to provided better protection from the elements and improved bass response. The ABS cast grille is integrated into the speaker to help seal the assembly which adds to the protection against the elements. The speaker frame and integrated grill are also UV protected which will help prevent color fade.

Speaker Wire: The NT1 tower speaker features an attached 7" speaker wire with bare-tinned wire on the other end and comes with two butt-connectors that can be crimped onto your amplifier's speaker wire. The solid black wire is negative, while the black with white stripe wire is positive.

Mounting Options: The included mounting hardware includes practically every conceivable tower and roll-cage size option, so there  is no need to purchase extra equipment. Eleven mounting hardware options from 1.5" to 2.75" are included. The mounting hardware are Die-Cast for strength and powder coated to resisted outdoor elements of sun, spray and dust. The mounting system between the pipe mount and the tower enclosure  has an internal steel mounting plate for additional strength. The Centering ring allows the speaker to tip left/right when mounted to an arced mount which means regardless of the angle of your tower or roll-cage, the speaker is always straight. Additionally, the NT1 tower speaker has been engineered to have less of the enclosure hanging below the mount, which means fewer friends & family bumping their heads on the speaker.

Illumination + Optional Remote: The NT1 tower speaker features built-in variable illumination. There is 12-volt Positive (Red) and Ground (Black) lead that will need to connected. To control the tower speaker's illuminated color and "light show", you must purchase MB Quart's N1-RC remote control (049N1RC, sold separately). The N1-RC remote control communicates with the tower speaker via RF, so you don't need direct line of sight. The N1-RC remote offers the following control functions.

• Power: Lights On or Off
• Memory: Goes back to the last setting
• Mode: Scroll up & down through dynamic light show modes
• Color: Scroll up & down for solid light colors
• Bright: Control the brightness of the LED illumination