Sanus BF16B Speaker Stands

Basic Foundations® — 16" (Black)

Outlet: Open Box

Item #: 051BF16B

Low Stock

19 Reviews


Outlet Savings:-$5.00

Your price: $34.99 pair Earn up to 35 Rewards points

Add to Cart Lifetime Tech Support

+ Add to wishlist + Email me alerts for this product

New Stock: $39.99 Scratch & Dent: $29.99

View all associated offers

How about furniture-grade speaker stands that are not only stylish, but can actually help improve your speakers' performance? Sanus' Basic Foundations® stands give you all that in an affordable package!

Basic Foundation stands are made with sturdy MDF (the same material used in many quality speaker cabinets) to resist unwanted resonance. Their twin contoured pillar design offers rock-steady support. Speaker wires run down a groove between the pillars — a snap-in black cover completely conceals the wires from sight, leaving just the clean lines of the stand. The stands come with triangular isolation pads for the top plate, to protect the speaker's finish, and provide additional resonance damping.

Priced per pair

Product Highlights:

  • stand height: 16"
  • top plate measures 7" x 7"
  • base plate measures 9-1/2" x 11-1/4"
  • supports 25 lbs.
  • floor spikes to help minimize vibrations
  • warranty: 5 years
  • Our 60-day money-back guarantee

Hands-on research

What's in the box?

Download owner's manual

  • 2 Black base plates
  • 2 Black top plates
  • 4 Black pillars
  • 2 Black plastic wire covers
  • 8 Isolation pads
  • 8 Plastic carpet spikes
  • 16 Wood screws
  • Instructions

Product Research


Overview: The BF16b speaker stands are constructed of MDF, which offers superior strength and resists unwanted resonance. The twin contoured pillars are aligned in a "V" configuration, offering additional rigidity and providing for the Speaker Cable Management System. A cover snaps into channels on the back of the pillars, hiding the cables from view. The supplied floor spikes further minimize resonance and provide stability on carpeting. The special triangular isolation pads are placed on the top plate for speaker protection and acoustic isolation.

Note: Each stand can support up to 25 pounds.


  • Overall: W=11.273", H=14.5625" (15.579" with spiked feet), D=9.457"
  • Top Plate: W=7", D=7"
  • Base Plate: W=11.273", D=9.457"

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Sanus BF16B Speaker Stands Reviews

Average Customer Review:

19 reviews
Review this product
Great Gear Giveaway

Submit a review and then enter to win a $350 rewards card


Review this product:

Thanks for taking the time to share your experiences about this product. Please be sure to focus your comments on the product itself. Read our Review Guidelines for more information.

Your email won't be visible. Please use the email address that is associated with your order.
(e.g., JohnD) Your review will be signed using the display name and location
(e.g., Charlottesville, VA)

Click on a star to rate the overall product on a scale of 1-5
1500 characters left
  Attach a YouTube Review
Crutchfield Video Review Guidelines
  • Only submit videos that you made or are authorized to use.
  • Do not submit videos that contain music, video or visuals that are copyrighted and belong to someone else.
  • Please see our Review Guidelines for more information.
500 characters left
500 characters left

Good Stands at a Great price.

Written By Chris, Florida on Monday, January 26, 2015

Crutchfield Customer Review (What's this?)

I like these cause they're wood. Most others are metal. Simple to put together, no problems. There is no tilt to them like the old ones I have but I expect that because of the height. Over all, good stands, great price and free shipping!

Pros: Made of wood, price.

Cons: None

Can Knock Over With a Feather

Written By JasonC, New York on Thursday, January 15, 2015

Crutchfield Customer Review (What's this?)

Lot's of pressed particle board or other light wood. I'm willing to pay a bit more for real wood that has some heft to it. Don't knock into these with the vacuum cleaner or they'll go right over. Also, the should include tacky rubber pads for the bottoms. These would work well on hardwood and other flat surfaces. I'm sure the rug spikes would work fine.

Pros: Price. Easy assembly.

Cons: Needs non-slip pads.

speaker stands

Written By mark d, Oregon on Thursday, December 11, 2014

Crutchfield Customer Review (What's this?)

stands are attractive and solidly made, should be good for a long time

Pros: stylish, easy to assemble

Cons: none

Better Than Expected!

Written By Palmiter, California on Tuesday, December 09, 2014

Crutchfield Customer Review (What's this?)

Afetr reading some very negative reviews about this product on another website, I crossed my fingers and ordered these stands anyway. I was surprised to discover that the negative turned into a positive! The stands WERE NOT difficult to assemble......the wood DID NOT split when attaching pieces together.......and they are sturdy and DO NOT wobble. Very happy I purchased!

Pros: Practical and just the right size.

Cons: Screw "tops" are visible on base top, but are covered by speaker placement.


Written By KENK, AZ on Sunday, August 10, 2014

Crutchfield Customer Review (What's this?)


Great Stands

Written By Happy customer, USA on Friday, July 11, 2014

Crutchfield Customer Review (What's this?)

Very well made and very easy to assemble.

Pros: Like the center hole for the speaker wire and the carpet spikes.

Sanus BF16B Speaker Stands

Written By MARV, North Central Florida on Tuesday, June 17, 2014

Crutchfield Customer Review (What's this?)

I purchased these based on the previous reviews left here at Crutchfield. After I made the order, I looked at them on other websites and almost half of the buyers of this product had trouble with wood splitting while installing the screws. The second largest complaint is the height of the stands. Just use a 1/8" drill bit and drill out the holes at each ends of the supports. Should you have to do this? Well, no but this is a common problem on all put together furniture. As for the height, I do not understand why they are advertised as 16" when they are just a little over 14 1/2". Overall, these are fairly nice stands. They give my Polk Audio Monitor 40's the presence they deserve. As for price, in my opinion this is a $20 kit. Crutchfield shipped them fast.

Pros: Decent design and sturdy stands.

Cons: Height, the need to drill out holes and a little overpriced

Speaker Stands

Written By MikeG, Cape Coral, Fl on Monday, March 03, 2014

Crutchfield Customer Review (What's this?)

Product was shipped and received promptly from Crutchfield. It took only a few minutes to assemble the stands. These were advertised as "basic" stands and that is exactly what they are. Base is wide for good stability and finish is good. These stands were fine for my purpose but would not go well where aesthetics were more of a concern

Pros: Inexpensive, stable, & easy assembly

Cons: Basic finish, not very attractive looking.

Sanus BF16B Speaker Stands

Written By Anonymous, Finksburg, MD on Tuesday, February 25, 2014

Crutchfield Customer Review (What's this?)

The SanusBF 16B speaker stands offer a high quality, reasonably priced stands that are well constructed and aesthetically pleasant in any listening room environment. These stands assemble easily, offer internal wiring to minimize speaker wire exposure and can support speaker weight up to 25 pounds. I consider the Sanus BF 16B speaker to be a leader inits class for speaker stand choice

Pros: Easy to assemble - aesthetically pleasant - hidden wiring capability - quality materials - economic

Cons: none that I can think of

Good stands!

Written By jj, Saint Joseph, LA on Thursday, February 06, 2014

Crutchfield Customer Review (What's this?)

Nice stands but DO NOT use an electric screwdriver to put these together. It will run the screw down too far and split the wood. I learned the hard way. I think it does say this in the directions somewhere but I didn't realize it until after the damage was done.

Sanus BF16B Speaker Stands

Written By Fatboy, Apex, NC on Tuesday, January 21, 2014

Crutchfield Customer Review (What's this?)

The stands were easy to assemble and for the price, were more than I expected. There not fancy but they sure are functional.

Sanus BF16B Speaker Stands

Written By ebbbb, usa on Wednesday, December 04, 2013

Crutchfield Customer Review (What's this?)

Crutchfield delivered the goods promptly, they were well packed. The instructions were clear and the assembly pieces were there and actual assembly was straight forward, max 20 minutes for both and only required simple hand tools.. The stands are wood/fiberboard painted black and when put together provide a sturdy 16 inch platform for bookshelf size speakers. Both the bottom and shelf provide enough real estate for proper weight dispersion and minimize vibration. The price is well within reason when compared to other stands. Overall, HIGHLY RECOMMENDED!

Speaker stands

Written By epsteim, Richmond Hts, Ohio on Saturday, November 09, 2013

Crutchfield Customer Review (What's this?)

I received the speaker stand sooner than expected! High quality product! I would recommend to anyone!

Pros: Easy to put together! Quality product

Cons: None

Sanus BF16B Speaker Stands

Written By Steve, Rohnert Park,Ca on Thursday, August 15, 2013

Crutchfield Customer Review (What's this?)

They do exactly what they are supposed to do and are attractive.

cheap but look great

Written By marc, Charlottesville, VA on Saturday, April 20, 2013

I have some fairly heavy ADS speakers and these stands work fine with them. They look good too.

Pros: look good, work, cheap

Cons: none

Great Product for the Money (Speaker Stand)

Written By Ford136, Jonesborough, Tn on Monday, February 25, 2013

Crutchfield Customer Review (What's this?)

Great Product Looks Great Easy to put together

Pros: Looks Great Easy assy.

Cons: N/A

Decent speaker stands

Written By MajJaz42, Murfreesboro, TN on Thursday, September 27, 2012

Crutchfield Customer Review (What's this?)

Easy to assemble, stable and nice looking. Didn't have an issue with the wood splitting that the other reviewer mentioned. In my experience, the only oddity worth mentioning is in regards to the holes drilled into the base and support platform that are intended to allow the speaker wire to be routed through them. The holes are pretty small, so if you're using heavy-gauge wire you're probably not going to be able to route the cable through the holes without spending a little time with a wood file to widen the holes. You certainly won't be able to route the cable through the hole if you're using banana plugs (not a big deal if you're using the screw-on type).

Pros: Easy assembly, nice looking

Cons: Aside from the speaker wire hole oddity, none

sanus BF16B speaker stands 16"

Written By SteveS, Brooklyn NY on Monday, August 13, 2012

Crutchfield Customer Review (What's this?)

great value for the price. I did have the wood split during assembly, only on one screw hole ( and in the rear, so its not visable). But overall the speakers sit nice on stands and sound great. My speakers are B&W, isolation is good as sanus provides rubber pads. For the price , you cant beat them and assembly is very easy!

Pros: easy to assemble, look good, speakers sound good placed on them

Cons: wood splits in the rear, due to design. I tried drilling the screw holes larger and screw stripped out.

Sanus BF16B Speaker Stands

Written By John, Brooklyn, NY on Friday, February 23, 2007

Great for the price, parts were missing from the package, called up Sanus and getting the parts in the mail within 72 hours, other then that my bookshelf speakers sit great on them, Also I'm sure you know already but cant get better then Cructhfield service!!!