Skip Navigation

Sanus FMS01

Cabinet TV mount for 32"-60" TVs

Item #: 051FMS01

In Stock

2 Reviews | Ask Questions

Special price:$179.99

Add to Cart for low price

+ Add to wishlist + Email me alerts for this product

View all associated offers

Increase your TV mounting options with the Sanus FMS01. The mount easily attaches to compatible Sanus cabinets and shelving. Your TV can be up where you want it, instead of taking up room on your cabinet top. Because the mount is secured to the back of your compatible Sanus cabinet, it's a perfect choice for rooms where wall-mounting isn't an option.

The bracket supports TVs with screen sizes from 32" to 60" and weighing up to 130 lbs. You can tilt the mount, and also swivel it from side to side to set your TV at the best viewing angle. You can also adjust the height by up to 10 inches. The mount's lower panel features access portals so you can thread cables behind it, keeping them out of sight.

Will this mount work with my TV?

Use the Sanus MountFinder™ to see a list of mounts that work with your specific TV.

Product Highlights:

  • universal mount for TVs with screen sizes 32"-60"
  • for use with select Sanus audio/video cabinets and shelving
  • tilt range: +12° to -12°
  • swivel range: +22° to -22°
  • steel frame with powder-coated scratch resistant black finish
  • panel hides cables from sight
  • weight capacity: 130 lbs.
  • 29"W x 57-3/4"H x 6-1/4"D
  • weight: 37 lbs.
  • warranty: 5 years
  • Our 60-day money-back guarantee
  • assembly required

Sanus FMS01 Reviews

Average Customer Review:

2 Reviews

Works great.

Written by: M~~ from New York on December 6, 2015

Crutchfield Customer Review (What's this?)

Great quality for the price.

Pros: Simple assembly. Good looking Subtle.

Cons: None

Cabinet TV Mount

Written by: Steve B from Honolulu, Hawaii on May 26, 2015

Crutchfield Customer Review (What's this?)

This mount was suggested by a Crutchfield rep after I tried searching on my own for three days. Amazing! Should have called Crutchfield to begin with. I purchased a multi-media console and it ended up being too low to set the flat screen on. I was able to screw this mount to the back of the console using the included finish hardware and elevated the TV about 18" above the console. Swivels left and right, tilts up and down. Fantastic!

Pros: Very sturdy and well made. Hardware included for a variety of installation configurations and TV sets.

Cons: Little bit of an industrial look that may not work with all design styles-or very well with others.

Hands-on research

What's in the box?

Download owner's manual

  • Pillar stand
  • Pillar mount
  • 2 TV brackets
  • 2 Stand brackets
  • 4 Dials (knobs)
  • 4 Cap-nuts
  • 4 Barrel-nuts
  • 2 Feet
  • 2 Rails
  • 4 Blocks
  • 4 Wire-guides
  • 2 Wire-clamps
  • Four M4 x 12mm screws
  • Four M4 x 35mm screws
  • Four M6 x 12mm screws
  • Four M6 x 20mm screws
  • Four M6 x 35mm screws
  • Four M8 x 16mm screws
  • Four M8 x 35mm screws
  • Four M6 x 12mm bolts
  • Four M5 x 16mm bolts
  • Four M4 washers
  • Four M5 washers
  • Four M6/M8 washers
  • Four 1/4-20 x 5/8" screws
  • Four 1/4-20 x 1" screws
  • Four 1/4-20 x 1-1/2" screws
  • Four 1/4-20 x 2-1/4" screws
  • Four 1/4-20 x 2-1/2" screws
  • Four 1/4-20 x 3-3/4" screws
  • Six 5/6" x 2-1/2" lag-bolts
  • Six 5/6" washers
  • Two 1/4-20 x 7/8" bolts
  • 6 Drywall anchors
  • Four small spacers
  • Four medium spacers
  • 4 Large spacers
  • 2 Long spacers
  • Hex-key
  • Assembly Instructions

Product Research


Overview: The Sanus Foundations FMS01 Furniture Mount System is an innovative mounting solution for 32" to 60" flat-panel TVs, up to 130 lbs. It attaches directly to select Sanus AV furniture for a drill-free mounting solution in any room. When attached to the FMS, TVs can tilt up to 24º and swivel 44º without the need for tools. Its mount height can be adjusted up to 10" to ensure the TV is always at the perfect viewing height.

Compatibility: The Sanus Foundations FMS01 is compatible with the following Sanus furniture models; JFV60, DFV50, BFAV48, BFAV344, BFV546, BFAV550, BFV146, BFV157 and BFV348. The FMS01 supports flat-panel televisions measuring 32" to 60" (diagonal); and weighing up to 130 lbs.

Mounting Pattern: The Sanus FMS01 mount offers a versatile bolt pattern which ranges from 100-600mm (horizontal) and 100-400mm (vertical). The FMS01 comes with 4mm, 6mm, and 8mm hardware.

Adjustable Mount: The Sanus FMS01offers height, tilt, and swivel adjustment.

  • Height Adjustable: You can adjust the overall height (38.625", 48.5", 51.4375", or 57.8125").
  • Tilt: You can tilt your mounted television up or down (+/-12°).
  • Swivel: You can swivel your mounted television left or right (+/-22°).

Cable Management: The pillar-mount helps to hide your television's cables to maintain a clean appearance.

Tools Required For Installation:

  • Stud-finder
  • Tape measure
  • Pencil
  • Punch
  • Phillips head screwdriver
  • 1/2" Socket wrench
  • Hammer
  • Electric drill
  • 7/32" Drill bit for wood stud installations
  • 3/8" Masonry bit for concrete or concrete block installations  

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Customer Q&A

Searches related to the Sanus FMS01 Cabinet TV mount for 32"-60" TVs