About the Sanus LL11-B1
The ultra-thin Sanus LL11 mount holds your TV a scant 9/16" from the wall — just about as close as you can get. It's the ideal wall-mount for many of the latest ultra-thin TVs. Yet this durable heavy-gauge design is strong enough to keep your TV firmly in place. The LL11 can support a TV with a screen size of 40" to 85", and a weight of up to 150 lbs.
The mount's brackets can easily be shifted to the right or left, in case the wall studs are a little off-center. You can also make small adjustments after the mount is affixed to the wall to level it, or even change the height. And the handy ClickStand at the bottom of each vertical brace swings out to prop your mounted TV away from the wall, to make cable hookup a breeze — without removing the TV from the mount.
Will this mount work with my TV?
Use the Sanus MountFinder™ to see a list of mounts that work with your specific TV.
Where do I drill the holes?
Tell the Sanus HeightFinder™ Installation Assistant how high you want your TV, and it tells you exactly where to drill.
Product highlights:
- fits most flat-panel plasma and LCD TVs from 40"-85"
- heavy-gauge steel construction with powder-coated finish
- supports up to 150 lbs.
- mount holds TV approximately 9/16" from wall
- built-in ClickStands hold a mounted TV out from wall for cable installation
- supports a wide range of VESA mounting hole patterns from 65 x 25mm to 825 x 500mm
- stud-mounting required
- movable brackets for off-center stud placement
- includes all necessary hardware
- 35-5/16"W x 22-1/2"H x 9/16"D
- warranty: 10 years
- MFR # LL11-B1
What's in the box:
- Wall plate
- 2 TV mounting brackets
- Four M4 x 12mm bolts
- Four M4 x 30mm bolts
- Four M4 x 40mm bolts
- Four M5 x 12mm bolts
- Four M5 x 30mm bolts
- Four M5 x 40mm bolts
- Four M6 x 14mm bolts
- Four M6 x 40mm bolts
- Four M6 x 55mm bolts
- Four M8 x 16mm bolts
- Four M8 x 45mm bolts
- Four M8 x 60mm bolts
- Four M4/M5 flat-washers
- Four M6/M8 flat-washers
- 4 Lag bolts
- 4 Drywall anchors
- 4 Plastic inserts
- 4 Large spacers
- 4 Medium spacers
- 4 Small spacers
- Allen wrench
- Hex-head bit
- Instruction Manual
Scratch & Dent items may be missing non-essential accessories. In some cases the manufacturer's accessories have been replaced with generic equivalents.
See the difference between "Open Box" and "Scratch & Dent" Outlet items
Customer reviews for Sanus LL11-B1
Loading...
Loading reviews...
Average review:
4.5 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Sanus LL11-B1
Features & specs
Features | ||
---|---|---|
Mount Type | Wall Mount | |
Motion | ||
Tilt | No | |
Swivel | No | |
Extend/Retract | No | |
Fixed | Yes | |
Roll (Level) Adjustment | Yes | |
Mounting Details | ||
Wood Stud (Single) | No | |
Wood Stud (Dual, 16-inch) | Yes | |
Wood Stud (Dual, 24-inch) | Yes | |
Concrete Block-compatible | Yes | |
Recessed Housing | No | |
Outdoor-rated | No | |
Motorized | No |
Product Research
Features
TV Compatibility: The LL11-B1 HDProSuper Slim Fixed Position wall-mount bracket is designed to fit flat-panel TVs from 40" to 85". The TV can have a maximum weight of 150 pounds. The TV must also meet the following VESA and screw size requirements:
- VESA Sizes: Given the mounting
bracket's range of motion, it will accommodate mounting bolt patterns between 65 x 25 through 825 x 500. The mount supports the following VESA (Video Electronics Standards Association) patterns:
100 x 100
100 x 200
200 x 100
200 x 200
200 x 300
200 x 400300 x 100
300 x 200|
300 x 300
300 x 400400 x 100
400 x 200
400 x 300
400 x 400
400 x 500500 x 100
500 x 200
500 x 300
500 x 400
500 x 500600 x 100
600 x 200
600 x 300
600 x 400
600 x 500700 x 200
700 x 300
700 x 400
700 x 500
800 x 200
800 x 400
800 x 500 - Mounting Hardware: The LL11-B1 comes with M4 (12mm, 30mm, 40mm lengths), M5 (12mm, 30mm, 40mm lengths), M6 (14mm, 40mm, 55mm lengths), and M8 (16mm, 45mm, 60mm lengths) bolts to mount the monitor brackets to your TV.
Steel Construction: The bracket is constructed of heavy-gauge steel with a durable powder-coated black finish.
Super Slim Low-Profile Design: The Sanus VisionMount LL11-B1 Super Slim Low-Profile Wall TV Mount features an innovative design which emphasizes the sleek look of your ultra-thin LCD, plasma, or LED TV by placing it just 9/16" from the wall.
Post Installation Adjustments: ProSet post-installation height and leveling adjustments allow TV to be perfectly positioned after hanging. Once installed, your TV or wall-mounted furniture may not appear completely level with its surroundings. ProSet technology lets you make micro-adjustments to height and level after mounting to ensure perfect positioning. Lateral shift allows the TV to move left and right on the wall plate so it is placed exactly where you want it, even with off-center studs.
Quick-Release Tabs with ClickStand: Convenient quick-release tabs on both mounting brackets stay hidden, but easily pull down to unlock the TV from the wall plate for cable access. ClickStand technology holds the bottom of the TV away from the wall for easy cable access without removing the TV from the mount. The LL11-B1's ClickStand feature allows you to tilt the bottom of the TV outward (8-degrees/3.0625-inches) and hold it there, giving you easy access to the back panel for connecting cables. Once all the cables have been plugged in, you can release the ClickStand and securely lock the TV into position on the wall plate.
Dual Stud Installation: The wall plate must be mounted to wall studs or anchored to a solid concrete or concrete block wall using the supplied lag bolts. The slots in the wall plate can accommodate a variety of stud spacing, allowing you to easily mount the TV to wall studs that are 16" or 24" on center. Once the wall plate is anchored to the wall studs and the monitor brackets (with the TV attached) are hooked onto the wall plate, the TV can slide left or right, allowing you to center the TV on the wall. The following tools are recommended for mounting the LL11-B1.
- Stud finder
- Punch
- Level
- Phillips-head screwdriver
- Electric drill
- Drill bits: 3/16" (wood studs) and 5/16" (masonry)
Loading...
Loading accessories...
Customer Q&A
8 questions already asked
Loading...
Loading articles...
This is a great TV mount if you are concerned about keeping the television close to the wall. In fact, the TV sits so close to the wall that you never see the wires and mounting hardware.
Brad from Stow, MA