At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere.
That's because we have our own in-house Product Research team — they open the box,
verify contents, check the owner's manual, and record dimensions, features and specs.
We stay on top of new products and technologies to help people make informed choices.
Features
Dimensions
Features
Overview: The Sanus VisionMount LL22-S1 Low-Profile TV Wall
Mount is designed for 30" to 70" TVs up to 175 pounds. The slim design
places the TV approximately 1.5" from the wall. It offers features that make
it easy to install and use; ClickStand technology holds the bottom of the TV away
from the wall for easy cable access without removing the TV from the mount, then
snaps in place to secure the unit to the wall plate. Convenient quick-release tabs
on both mounting brackets stay hidden, but easily pull down to unlock the TV from
the wall plate for cable access. The ProSet feature allows post-installation height
and leveling adjustments for perfect positioning after hanging. Lateral shift allows
the TV to move left and right on the wall plate so it is placed exactly where you
want it, even with off-center studs. Wall plate mounting holes are designed to
accommodate 16" or 24" studs. Universal mounting pattern fits virtually
any 30" - 70" flat-panel TV up to 175 lbs. ClickFit technology allows a
surge protector to attach easily to the center of the mount, so it stays hidden yet
easily accessible.
Compatibility: The LL22-S1 universal wall-mount bracket is
designed to fit flat-panel plasma and LCD monitors from 30" to 70". The
TV can have a maximum weight of 175 pounds.
Construction: The TV brackets are constructed of heavy-gauge
steel with a durable powder-coated finish. The wall plate is made from an
aluminum alloy.
Low-Profile Design: The VisionMount LL22-S1's low-profile mount
design places your flat-panel TV approximately 1.5" from the wall.
ProSet: ProSet post-installation height and leveling adjustments
allow TV to be perfectly positioned after hanging. Once installed, your TV may not
appear completely level with its surroundings. ProSet technology lets you make
adjustments to height and level after mounting to ensure perfect positioning.
ClickStand: The LL22-S1's ClickStand feature allows you to tilt
the bottom of the TV outward and hold it there, giving you easy access to the back
panel for connecting cables. Once all the cables have been plugged in, release the
ClickStand and securely lock the TV into position on the wall plate.
Mounting: The wall plate must be mounted to wall studs or anchored
to a brick, block, or concrete wall using the supplied lag bolts. The slots in the wall
plate can accommodate a variety of stud spacing, allowing you to easily mount the TV to
wall studs that are 16" or 24" on center. Once the wall plate is anchored to
the wall studs and the monitor brackets (with the TV attached) are hooked onto the wall
plate, the TV can slide left or right, allowing you to center the TV on the wall.
Note: Each monitor bracket has multiple
bolt holes and can accommodate vertical hole spacing (on the
back of the TV) up to approximately 17" (430mm). Since
the monitor brackets can slide on the wall plate, the
horizontal hole spacing on the back of the TV can range
from 3-1/2" (88mm) to 27-7/8" (708mm).
Mounting Hardware: The LL22-S1 comes with M4, M5, M6, and M8
bolts to mount the monitor brackets to your TV.
ClickFit: The ClickFit system makes it easy to create a seamless
home theater installation by allowing surge protectors and other small devices to be
positioned directly behind the TV.
VESA: Given the mounting bracket's range of motion, it will
accommodate the VESA 100, 200, 300, 400, 200 x 100, 400 x 200, 400 x 300, and
600 x 400 mounting hole patterns in accordance with industry standards set by
the Video Electronics Standards Association.
Installation Tools: The following tools are recommended for
mounting the LL22-S1:
- Stud finder
- Punch
- Level
- Phillips-head screwdriver
- Electric drill
- Drill bits: 7/32" (wood studs) or 1/2"
masonry bit (concrete or block)
Dimensions
Wall Plate Dimensions:
- Width: 30.125"
- Height: 12.25"
- Depth: 0.8"
Monitor Bracket Dimensions:
- Width: 2.529"
- Height: 19.25"
- Depth: 1.445"