About the Sanus MC1A
The Sanus MC1A ceiling mount lets you place your LCD flat-panel TV in locations where wall-mounting isn't an option, such as in a corner of your room. It's designed to work with virtually any 23" to 40" LCD panel. A channel in the back of the mount keeps your TV's cables hidden for an uncluttered appearance.
You can swivel your TV 15° left or right, and tilt it up or down 15°. Sanus' Virtual Axis™ technology allows variable angle adjustment with just the touch of a finger. With Virtual Axis, the display stays exactly where you aim it, and you can lock the position by simply tightening a knob.
Will this mount work with my TV?
Use the Sanus MountFinder™ to see a list of mounts that work with your specific TV.
Where do I drill the holes?
Tell the Sanus HeightFinder™ Installation Assistant how high you want your TV, and it tells you exactly where to drill.
Product highlights:
- designed for flat-panel LCD TVs from 23" to 40"
- weight capacity: 70 lbs.
- VESA 200 and VESA 100 mounting hole patterns
- tilt range: +15° to -15°
- swivel range: +15° to -15°
- mounting hardware included
- wire management channel
- ceiling joist mounting recommended
- 9-3/16"W x 21"H x 5-1/8"D
- warranty: 10 years
- MFR # MC1A-B1
What's in the box:
- TV bracket
- Mounting arm w/ attached ceiling plate
- Ceiling plate cover
- Wire channel cover
- Four M4 x 12mm screws
- Four M5 x 12mm screws
- Four M6 x 12mm screws
- Four M8 x 12mm screws
- Four M6 x 20mm screws
- Four M4 x 30mm screws
- Four M5 x 30mm screws Four M6 x 35mm screws
- 4 M8 x 40mm screws
- Two 5/16" x 2.5" lag bolts
- 2 Lag-bolt washers
- Eight M4/M5 washers
- Eight M6/M8 washers
- Four M4/M5 spacers
- Four M6/M8 spacers
- 5/32" Hex-key
- Installation Instructions
Customer reviews for Sanus MC1A
Loading...
Loading reviews...
Average review:
5.0 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Sanus MC1A
Features & specs
Features | ||
---|---|---|
Mount Type | Ceiling Mount | |
Motion | ||
Tilt | Yes | |
Swivel | Yes | |
Extend/Retract | No | |
Fixed | No | |
Roll (Level) Adjustment | Yes | |
Mounting Details | ||
Wood Stud (Single) | Yes | |
Wood Stud (Dual, 16-inch) | No | |
Wood Stud (Dual, 24-inch) | No | |
Concrete Block-compatible | No | |
Recessed Housing | No | |
Outdoor-rated | No | |
Motorized | No |
Product Research
Features
Ceiling Mount: The Sanus VisionMount MC1A full-motion ceiling mount allows you to mount a medium-sized flat-panel TV in places where wall mounting is difficult or not possible. This mount can be used for corner placement as well. It is recommended for 23" to 40" flat panel TVs or monitors up to 70 pounds.
Construction: The MC1A is made of rigid extruded aluminum with a durable anodized finish for a high-tech look that compliments your home theater equipment.
VESA-compatible Mounting Bracket: The MC1A's mounting bracket can accommodate VESA 75 (75mm x 75mm), VESA 100 (100mm x 100mm), VESA 200 (200mm x 200mm), and VESA 200 x 100. The mounting bracket comes with M4, M5, M6, and M8 mounting hardware in different lengths to accommodate most TVs. For TVs with curved back panels, a variety of spacers is provided for a secure fit.
Adjustable Height: The unit allows you to adjust the height of the TV for perfect positioning. You can raise or lower the TV in a range of approximately 1-3/4".
Virtual Axis 3D: The cup-shaped faceplate design allows you to effortlessly tilt or swivel the TV up to 15° in any direction without the use of tools. A single knob allows you to tighten the faceplate in the position you desire.
Wire Channel: The back of the pillar assembly contains a built-in wire management system to protect and conceal cables. A plastic cover is included to cover the wire channel for a finished look.
Required Tools: Installation of the MC1A requires the following tools:
- Phillips-head screwdriver
- Socket wrench with 1/2" socket
- Drill with 7/32" drill bit
- Electronic stud finder
Dimensions
- Overall: Width = 9.135", H = 21", D = 5.125"
- Pillar Assembly: Diameter = 5.181", Height = 18.375"
- Large VESA Plate: Width = 9.135", Height = 9.351", Depth = 0.909"
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...
This Sanus Ceiling TV mount was actually fun to install. The most difficult part was accurately locating the ceiling joist. After that, it's easy work. Drill a couple of holes in the joist for the lag bolts and you're pretty close to done.
JD from FL