About the Sanus ML22 (Black)
The sturdy VisionMount® ML22 from Sanus works with flat-panel LCD displays with screen sizes up to 42". Thanks to its simple design, this mount holds your flat-panel TV a scant 1" from the wall, making it an especially smart choice for TVs with side-mounted or bottom-mounted inputs. The ML22 combines heavy-gauge steel construction with outstanding fit and finish, and includes all necessary mounting hardware.
Will this mount work with my TV?
Use the Sanus MountFinder to see a list of mounts that work with your specific TV.
Where do I drill the holes?
Tell the Sanus HeightFinder Installation Assistant how high you want your TV, and it tells you exactly where to drill.
Product highlights:
- fits most flat-panel LCD TVs 26"-42"" (VESA 75, 100, 200, 400 mounting standard)
- heavy-gauge steel construction with powder-coated finish
- supports up to 100 lbs.
- stud-mounting required
- includes all necessary hardware
- 17-3/4"W x 13"H x 1"D
- warranty: 10 years
- MFR # ML22-B1
What's in the box:
Sanus ML22 (Black) owner's manual
- Wall plate
- 2 TV mounting brackets
- 3 Hex-head lag screws (length=2.5")
- 3 Flat washers (for lag screws)
- 3 Wall anchors
- Four M4 x 12mm bolts
- Four M5 x 12mm bolts
- Four M6 x 12mm bolts
- Four M4 x 30 bolts
- Four M5 x 30mm bolts
- Four M6 x 20mm bolts
- Four M6 x 35mm bolts
- Eight M4/M5 flat washers
- Four M6/M8 flat washers
- Four M4/M5 plastic spacers
- Four M6/M8 plastic spacers
- Assembly instructions
Customer reviews for Sanus ML22 (Black)
Loading...
Loading reviews...
Average review:
4.0 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Sanus ML22 (Black)
Features & specs
Features | ||
---|---|---|
Mount Type | Flat panel TV | |
Motion | ||
Tilt | No | |
Swivel | No | |
Extend/Retract | No | |
Fixed | No | |
Roll (Level) Adjustment | No | |
Mounting Details | ||
Wood Stud (Single) | No | |
Wood Stud (Dual, 16-inch) | No | |
Wood Stud (Dual, 24-inch) | No | |
Concrete Block-compatible | No | |
Recessed Housing | No | |
Outdoor-rated | No | |
Motorized | No |
Product Research
Features
Overview: The Sanus Systems VisionMount ML22 is a low-profile wall mount for medium flat panel TVs and monitors. The mount holds the TV approximately 1" from the wall for a clean look. This mounting bracket is made of powder-coated steel and is glossy black in color. Once mounted, the TV can slide laterally for perfect placement, even with off-center studs.
Capacity: The ML22 is designed for 26" to 42" flat panel TVs. It has a weight capacity of up to 100 pounds.
VESA Compatible: This TV wall-mount features two TV mounting brackets with holes spaced up to 11.9" (303mm) apart. The brackets can slide horizontally along the wall plate to give you a horizontal range of 1-1/2" (38mm) to 13.6" (345mm). If you reverse the brackets, the maximum horizontal mounting hole width becomes 16.25" (412mm). Given the vertical and horizontal ranges, this TV wall mount can accommodate TVs with the following VESA bolt patterns (Horizontal x Vertical):
- 50mm x 50mm
- 75mm x 75mm
- 100mm x 100mm
- 200mm x 100mm
- 200mm x 200mm
- 300mm x 200mm
- 300mm x 300mm
- 400mm x 200mm (with brackets reversed)
- 400mm x 300mm (with brackets reversed)
Included Hardware: The ML22 comes with the following hardware:
- Wall Plate Hardware:
- Three 2-1/2" lag screws
- 3 Flat washers
- 3 Wall anchors (for concrete or concrete block mounting)
- TV Bracket Hardware:
- Four M4 Bolts (lengths): 12mm, 30mm
- Four M5 Bolts (lengths): 12mm, 30mm
- Four M6 Bolts (lengths): 12mm, 20mm, 35mm
- Flat Washers: 8 for M4/M5, 4 for M6/M8
- Plastic Spacers: 4 for M4/M5, 4 for M6/M8
Wall Mounting: The bracket should be mounted to a wood wall stud, solid concrete, or concrete block using the supplied wall-mount lag screws. Required tools include:
- Stud finder
- Level
- Awl
- Pencil
- Phillips-head screwdriver
- Wrench
- Drill with 1/2" masonry bit or 3/16" wood bit
Security: The ML22 has a locking mechanism which holds the TV securely in place. There's a loop for an optional padlock for added security.
Dimensions:
- Wall Plate: W=15.5", H=6", D=0.5625"
- TV Brackets: L=13", W=1.5" (locking bracket=2"), D=0.8125"
- Overall (Assembled): W=15.5" (17.75" max) , H=13", D=0.9"
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...
this product worked well.It was sturdy & came with lots of hardware,simple to understand instructions
wayne from mechanicsville