Skip Navigation

Sanus Classic MLF10-B1

Full-motion mount for TVs 32"-63"

4 Reviews

Item #: 051MLF10

This item is no longer available.

Original Price: $159.99

Shop all TV Wall Mounts

Add to Cart

Sanus Classic MLF10-B1

Overview

Our take on the Sanus Classic™ MLF10-B1

The Sanus Classic MLF10-B1 is designed for flat-panel TVs up to 63" and provides a full range of motion for optimal positioning. Its arm can extend your display up to 9-1/2" from the wall, and can swivel up to 30° left or right. And it also tilts up or down.

Sanus Classic

The Sanus Classic MLF10-B1 is designed for flat-panel TVs up to 63" and provides a full range of motion for optimal positioning. Its arm can extend your display up to 9-1/2" from the wall, and can swivel up to 30° left or right. And it also tilts up or down.

The mounting plate can swivel up to 45° left or right, and you can also tilt it slightly to ensure your TV's perfectly level. The mount can slide slightly from side to side for optimal placement, even with off-center studs.

Will this mount work with my TV?
Use the Sanus MountFinder™ to see a list of mounts that work with your specific TV.

Where do I drill the holes?
Tell the Sanus HeightFinder™ Installation Assistant how high you want your TV, and it tells you exactly where to drill.

What's in the Box:

  • Wall plate
  • Arm assembly
  • 2 TV brackets
  • 2 TV posts
  • 4 Vice assemblies
  • Four M4 x 12mm screws
  • Four M4 x 30mm screws
  • Four M5 x 12mm bolts
  • Four M5 x 30mm bolts
  • Four M6 x 12mm Bolts
  • Four M6 x 35mm bolts
  • Four M8 x 16mm bolts
  • Four M8 x 40mm bolts
  • Eight M4/M5 flat washers
  • Four M5/M6 flat washers
  • Four M4 star washers
  • Four M5 star washers
  • Four M6 star washers
  • Four M8 star washers
  • Four M4/M5 spacers
  • Four M6/M8 spacers
  • Four 5/16" x 2-1/2" lag-bolts
  • Four 5/16" flat washers
  • Two 1/4" x 2" carriage bolts
  • 2 Safety bolts
  • Four Nylock nuts
  • 5 Wire-ties
  • 2 Wire-tie clips
  • 7/32" Allen wrench
  • 3/16" Allen wrench
  • Instruction Manual

Product Highlights:

  • designed for flat-panel TVs 32"-63"
  • supports up to 150 lbs.
  • arm holds TV up to 9-1/2" from wall
  • mounting hardware included
  • swivel range: 30° right and 30° left
  • tilt range: +5° up to -15° down
  • mounting plate pan range: 45° right and 45° left
  • stud-mounting required
  • 35-1/4"W x 18-1/2"H x 2-1/2" to 9-1/2"D
  • warranty: 2 years
  • Our 60-day money-back guarantee
Reviews

Sanus Classic™ MLF10-B1 Reviews

Average Customer Review:

4 Reviews

sanus classic mlf10-b1

Written by: sanus wall mount from Trinity Nc on January 16, 2014

Crutchfield Customer Review (What's this?)

Great wall mount, easy to install

Pros: Easy to install.

Cons: None

Sanus Classic™ MLF10-B1

Written by: Anonymous from Mt. Vernon IN on December 12, 2013

Crutchfield Customer Review (What's this?)

I have used Sanus mounts in the past. One issue I had with this one was when mounting to a Samsung TV the short bolts were to short, the spacers were to long for the long bolts had to purchase shorter spacers.

Pros: Easy install

Cons: See review

Sanus Classic Wall Mount

Written by: Shorty from North Carolina on January 5, 2013

Crutchfield Customer Review (What's this?)

I was disappointed with this wall mount considering how expensive it was. The installation instructions were poor, the bolts provided did not work with my TV although ithis mount was supposed to work with the TV I purchased (short bolts were too short, long bolts were too long). When I contacted Tech Support I was told to go to a hardware store. I finally got the ones I needed. Also the level and tilt adjustements do not hold and must be constantly readjusted.

Pros: Easy and quick to attach the TV to the wall mount plate with two helpers.

Cons: Poor directions, parts that are not compatible with TV, unstable tilt and level adjustmenets.

Solid heavy swivel

Written by: philo from Hudson, NY on February 20, 2012

Crutchfield Customer Review (What's this?)

Out of the box, this was a heavy substantial well made product albeit with difficult instructions. We got lucky on the install and even though the studs were off center, when the unit is piushed all the way back it's perfectly centered on the wall. It swivels just enough for our needs (we don't use the minimal tilt) and is sturdy.

Pros: Substantial and well made

Cons: Can be a bit tricky on the install, but worked out perfectly

Details

Hands-on research

What's in the box?

Download the Sanus Classic™ MLF10-B1 manual

  • Wall plate
  • Arm assembly
  • 2 TV brackets
  • 2 TV posts
  • 4 Vice assemblies
  • Four M4 x 12mm screws
  • Four M4 x 30mm screws
  • Four M5 x 12mm bolts
  • Four M5 x 30mm bolts
  • Four M6 x 12mm Bolts
  • Four M6 x 35mm bolts
  • Four M8 x 16mm bolts
  • Four M8 x 40mm bolts
  • Eight M4/M5 flat washers
  • Four M5/M6 flat washers
  • Four M4 star washers
  • Four M5 star washers
  • Four M6 star washers
  • Four M8 star washers
  • Four M4/M5 spacers
  • Four M6/M8 spacers
  • Four 5/16" x 2-1/2" lag-bolts
  • Four 5/16" flat washers
  • Two 1/4" x 2" carriage bolts
  • 2 Safety bolts
  • Four Nylock nuts
  • 5 Wire-ties
  • 2 Wire-tie clips
  • 7/32" Allen wrench
  • 3/16" Allen wrench
  • Instruction Manual

Product Research

Features

Overview: The Sanus Classic MLF10-B1 is a full-motion wall-mount bracket for medium to large sized flat-panel TVs and monitors.

TV Compatibility: The MLF10-B1 can accommodate TVs and monitors with screen sizes from 32" to 63", and weighing up to 150 pounds.

Mounting Bolt Hardware/Pattern:  4mm, 5mm, 6mm, and 8mm hardware is included. Given the mounting bracket's range of motion, it will accommodate the following mounting bolt patterns:

  • 300 x 200
  • 300 x 300
  • 400 x 200
  • 400 x 300
  • 400 x 400
  • 500 x 300
  • 500 x 400
  • 600 x 400
Note: Additional hardware may be required for your specific model of TV. For example; shorter or longer screws, thicker or slimmer washers or spacers. These additional accessories can often be found at your local hardware store.

Full-Motion Mount: The Sanus Classic MLF10-B1 full-motion TV wall-mount lets you extend the distance between your television and the wall (2.5" to 9.5"), swivel the articulating arm left or right (+/-30°), pan the TV mounting bracket left or right (+/-45°), and tilt the mounted television up (15°)or down (5°). You can also slide the mounted television horizontally along the wall plate, as well as adjust the "roll" of the TV bracket to make sure your TV is level.

Tools Required:

  • Stud finder (wood stud mounting only)
  • Punch
  • Level
  • Tape Measure
  • Pencil
  • Phillips-head screwdriver
  • Adjustable wrench
  • 1/2" (13mm) socket wrench
  • Electric drill
  • 7/32" Drill bit

Dimensions:

  • TV Bracket: W=29.25", H=18.5", D=1.875"
  • Wall Plate: W=18.625", H=8.8125", D=0.75"
  • Full-Motion Arm Length: 2.5" to 9.5"
Note: The TV bracket can slide horizontally along the wall plate bracket. When slid completely to one side and the articulating arm folded flat, it is possible that the wall plate may be visible behind some smaller TVs. The overall width of the assembly can be as much as 35.25"

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Accessories
Library