About the Sanus Classic MLF10-B1
The Sanus Classic MLF10-B1 is designed for flat-panel TVs up to 63" and provides a full range of motion for optimal positioning. Its arm can extend your display up to 9-1/2" from the wall, and can swivel up to 30° left or right. And it also tilts up or down.
The mounting plate can swivel up to 45° left or right, and you can also tilt it slightly to ensure your TV's perfectly level. The mount can slide slightly from side to side for optimal placement, even with off-center studs.
Will this mount work with my TV?
Use the Sanus MountFinder to see a list of mounts that work with your specific TV.
Where do I drill the holes?
Tell the Sanus HeightFinder Installation Assistant how high you want your TV, and it tells you exactly where to drill.
Product highlights:
- designed for flat-panel TVs 32"-63"
- supports up to 150 lbs.
- arm holds TV up to 9-1/2" from wall
- mounting hardware included
- swivel range: 30° right and 30° left
- tilt range: +5° up to -15° down
- mounting plate pan range: 45° right and 45° left
- stud-mounting required
- 35-1/4"W x 18-1/2"H x 2-1/2" to 9-1/2"D
- warranty: 2 years
- MFR # MLF10-B1
What's in the box:
Sanus Classic MLF10-B1 owner's manual
- Wall plate
- Arm assembly
- 2 TV brackets
- 2 TV posts
- 4 Vice assemblies
- Four M4 x 12mm screws
- Four M4 x 30mm screws
- Four M5 x 12mm bolts
- Four M5 x 30mm bolts
- Four M6 x 12mm Bolts
- Four M6 x 35mm bolts
- Four M8 x 16mm bolts
- Four M8 x 40mm bolts
- Eight M4/M5 flat washers
- Four M5/M6 flat washers
- Four M4 star washers
- Four M5 star washers
- Four M6 star washers
- Four M8 star washers
- Four M4/M5 spacers
- Four M6/M8 spacers
- Four 5/16" x 2-1/2" lag-bolts
- Four 5/16" flat washers
- Two 1/4" x 2" carriage bolts
- 2 Safety bolts
- Four Nylock nuts
- 5 Wire-ties
- 2 Wire-tie clips
- 7/32" Allen wrench
- 3/16" Allen wrench
- Instruction Manual
Customer reviews for Sanus Classic MLF10-B1
Loading...
Loading reviews...
Average review:
3.5 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Sanus Classic MLF10-B1
Features & specs
Features | ||
---|---|---|
Mount Type | Flat panel TV | |
Motion | ||
Tilt | No | |
Swivel | No | |
Extend/Retract | No | |
Fixed | No | |
Roll (Level) Adjustment | No | |
Mounting Details | ||
Wood Stud (Single) | No | |
Wood Stud (Dual, 16-inch) | No | |
Wood Stud (Dual, 24-inch) | No | |
Concrete Block-compatible | No | |
Recessed Housing | No | |
Outdoor-rated | No | |
Motorized | No |
Product Research
Features
Overview: The Sanus Classic MLF10-B1 is a full-motion wall-mount bracket for medium to large sized flat-panel TVs and monitors.
TV Compatibility: The MLF10-B1 can accommodate TVs and monitors with screen sizes from 32" to 63", and weighing up to 150 pounds.
Mounting Bolt Hardware/Pattern: 4mm, 5mm, 6mm, and 8mm hardware is included. Given the mounting bracket's range of motion, it will accommodate the following mounting bolt patterns:
- 300 x 200
- 300 x 300
- 400 x 200
- 400 x 300
- 400 x 400
- 500 x 300
- 500 x 400
- 600 x 400
Full-Motion Mount: The Sanus Classic MLF10-B1 full-motion TV wall-mount lets you extend the distance between your television and the wall (2.5" to 9.5"), swivel the articulating arm left or right (+/-30°), pan the TV mounting bracket left or right (+/-45°), and tilt the mounted television up (15°)or down (5°). You can also slide the mounted television horizontally along the wall plate, as well as adjust the "roll" of the TV bracket to make sure your TV is level.
Tools Required:
- Stud finder (wood stud mounting only)
- Punch
- Level
- Tape Measure
- Pencil
- Phillips-head screwdriver
- Adjustable wrench
- 1/2" (13mm) socket wrench
- Electric drill
- 7/32" Drill bit
Dimensions:
- TV Bracket: W=29.25", H=18.5", D=1.875"
- Wall Plate: W=18.625", H=8.8125", D=0.75"
- Full-Motion Arm Length: 2.5" to 9.5"
The Sanus Classic MLF10-B1 replaces these items
Sanus VisionMount VMSA
- For 37"-56" TVs
- supports up to 150 lbs.
- tilt range: +5° to -15°
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...