About the Sanus Classic MLL12-B1
The Sanus Classic MLL12-B1 is designed for flat-panel TVs up to 63" and holds your display just 1-1/4" from the wall. And you can slide the mount slightly from side to side for optimal placement, even with off-center studs. The mount's open-frame design allows plenty of room to store cables out of sight.
Will this mount work with my TV?
Use the Sanus MountFinder to see a list of mounts that work with your specific TV.
Where do I drill the holes?
Tell the Sanus HeightFinder Installation Assistant how high you want your TV, and it tells you exactly where to drill.
Product highlights:
- designed for flat-panel LCD TVs 32"-63"
- supports up to 130 lbs.
- holds TV 1-1/4" from wall
- mounting hardware included
- open-frame design provides room to hide cables
- lateral shifting for optimal placement with off-center studs
- stud-mounting required
- 32"W x 20H" x 1-1/4"D
- warranty: 2 years
- MFR # MLL12-B1
What's in the box:
Sanus Classic MLL12-B1 owner's manual
- Wall bracket
- 2 TV brackets
- Locking bar
- Four M4 x 12mm screws
- Four M4 x 30mm screws
- Four M5 x 12mm screws
- Four M5 x 30mm screws
- Four M6 x 12mm screws
- Four M6 x 20mm screws
- Four M6 x 35mm screws
- Four M8 x 16mm screws
- Four M8 x 40mm screws
- Four M8 x 60mm screws
- Eight M4/M5 flat washers
- Four M6/M8 flat washers
- Four M4 star washers
- Four M5 star washers
- Four M6 star washers
- Four M8 star washers
- Four M4/M5 spacers
- Four M6/M8 spacers
- Six 5/16" x 2.5" lag-bolts
- 6 Wall-anchors
- Three 5/16" lag-bolt washers
- 3/6" Allen wrench
- Instruction Manual
Customer reviews for Sanus Classic MLL12-B1
Loading...
Loading reviews...
Average review:
3.0 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Sanus Classic MLL12-B1
Features & specs
Features | ||
---|---|---|
Mount Type | Flat panel TV | |
Motion | ||
Tilt | No | |
Swivel | No | |
Extend/Retract | No | |
Fixed | No | |
Roll (Level) Adjustment | No | |
Mounting Details | ||
Wood Stud (Single) | No | |
Wood Stud (Dual, 16-inch) | No | |
Wood Stud (Dual, 24-inch) | No | |
Concrete Block-compatible | No | |
Recessed Housing | No | |
Outdoor-rated | No | |
Motorized | No |
Product Research
Overview: The Sanus Classic MLL12-B1 is a low-profile wall-mount bracket for medium to large sized flat-panel TVs and monitors.
TV Compatibility: The MLL12-B1 can accommodate TVs and monitors with screen sizes from 32" to 63", and weighing up to 130 pounds.
Mounting Bolt Hardware/Pattern: 4mm, 5mm, 6mm, and 8mm hardware is included. Given the mounting bracket's range of motion, it will accommodate the following mounting bolt patterns:
- 75 x 75
- 100 x 100
- 200 x 100
- 200 x 200
- 300 x 200
- 300 x 300
- 400 x 200
- 400 x 300
- 400 x 400
- 500 x 300
- 500 x 400
- 600 x 400
Note: Additional hardware may be required for your specific model of TV. For example; shorter or longer screws, thicker or slimmer washers or spacers. These additional accessories can often be found at your local hardware store.
Low Profile Design: The Sanus Classic MLL12-B1 features a low-profile design that places your television only 1.25" from the wall.
Tools Required:
- Stud finder
- Punch
- Level
- Tape Measure
- Pencil
- Hammer
- Phillips-head screwdriver
- 1/2" (13mm) socket wrench
- Electric drill
- Drill bit (7/32" for wood stud, 1/2" for concrete)
Dimensions:
- Overall: W = 32.0", H = 20.0", D = 1.25"
- TV Brackets (2): W = 1.5", H = 20.0", D = 1.0625"
- Wall Plate: W = 32.0", H = 8.8125", D = 0.75"
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...