About the Sanus Classic MMF12b
A tilting, swiveling mount for smaller TVs
A tilting, swiveling mount for smaller TVs
The full-range Sanus Classic MMF12b mount gives you plenty of options for positioning your TV. It can hold it close to the wall, or extend it outward up to 12". You can swivel the TV left or right up to 45°, and tilt it up or down as far as 15° for optimal viewing. The mount's brackets can easily be shifted to the right or left, in case the wall studs are a little off-center. The MMF12b can support a TV with a screen size of up to 47", and a weight of up to 60 lbs.
Will this mount work with my TV?
Use the Sanus MountFinder™ to see a list of mounts that work with your specific TV.
Where do I drill the holes?
Tell the Sanus HeightFinder™ Installation Assistant how high you want your TV, and it tells you exactly where to drill.
Product highlights:
- fits most flat-panel TVs from 32"-47"
- heavy-gauge steel construction
- supports up to 60 lbs.
- extends TV up to 12" from wall
- swivel range: ±45°
- tilt range: ±15°
- roll range: ±6°
- stud-mounting required
- movable brackets for off-center stud placement
- includes all necessary hardware
- conceals cables for a neat on-wall TV installation
- 18-3/4"W x 16-9/16"H x 3"D (with arm retracted)
- warranty: 5 years
- MFR # MMF12b-B1
What's in the box:
Sanus Classic MMF12b owner's manual
- Wall-plate/arm assembly
- 2 Veritcal TV brackets
- 2 Horizontal TV brackets
- Four M4 x 12mm bolts
- Four M4 x 35mm bolts
- Four M5 x 12mm bolts
- Four M5 x 35mm bolts
- Four M6 x 12mm Bolts
- Four M6 x 20mm bolts
- Four M6 x 35mm bolts
- Four M8 x 16mm bolts
- Four M8 x 20mm bolts
- Four M8 x 35mm bolts
- Four M4/M5 washers
- Four M6/M8 washers
- Two 5/16" x 2-3/4" lag bolts
- 2 Lat washers
- 2 Wall-anchors
- 8-32" x 3/8" locking screws
- Lock-washer
- 4 Spacers
- 3/15" Hex-key
- 5/32" Hex-key
- Instruction Manual
Customer reviews for Sanus Classic MMF12b
Loading...
Loading reviews...
Average review:
4.5 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Sanus Classic MMF12b
Features & specs
Features | ||
---|---|---|
Mount Type | Full-motion | |
Motion | ||
Tilt | No | |
Swivel | No | |
Extend/Retract | No | |
Fixed | No | |
Roll (Level) Adjustment | No | |
Mounting Details | ||
Wood Stud (Single) | No | |
Wood Stud (Dual, 16-inch) | No | |
Wood Stud (Dual, 24-inch) | No | |
Concrete Block-compatible | No | |
Recessed Housing | No | |
Outdoor-rated | No | |
Motorized | No |
Product Research
Features
TV Capacity: The Sanus Classic Series MMF12B wall-mount bracket is designed to support flat-panel TVs from 32" to 47", weighing up to 60 lbs.
VESA Bolt Pattern: The Sanus MMF12B wall-mount bracket accommodates a horizontal hole spacing on back of the TV of 100mm-420mm and a vertical hole spacing of 100mm-400mm. The MMF12B comes with M4, M5, M6, and M8 size bolts of differing lengths to mount the bracket to your TV. It will accommodate the following VESA hole patterns in accordance with industry standards set by the Video Electronics Standards Association:
- 100mm x 100mm
- 200mm x 100mm
- 200mm x 200mm
- 300mm x 200mm
- 300mm x 300mm
- 400mm x 300mm
- 400mm x 400mm
Full-Motion Design: The Sanus Classic Series MMF12B's full-range of movement allows smooth extend, tilt, swivel, pan, and roll motions. The MMF12B extends from the wall (3"-12"), tilts up/down (+/-15°), swivels left/right (+/-45°), pans left/right (+/-90°), and rolls up/down(+/-6°) for easy viewing anywhere in the room.
Post-Installation Adjustments: Post-install leveling adjustments ensure your flat-panel TV is perfectly leveled & positioned.
Construction: The MMF12B bracket is constructed of heavy-gauge steel with a durable powder-coated black finish. This solid construction provides strength and increased safety.
Cable-Management: An in-arm cable management channel conceals cables the length of the mount for a seamless appearance.
Wall-Plate: The wall plate must be mounted to a wall stud or anchored to a brick, block, or concrete wall using the supplied lag bolts (and wall-anchors).
Installation Tools: The following tools are recommended for mounting the MMF12B:
- Tape measure
- Pencil
- Stud finder
- Level
- Awl
- Drill
- 7/32" Drill bit (for wood stud)
- 3/8" Drill bit (for masonry)
- 1/2" Socket wrench
- Screw driver
- Hammer
Loading...
Loading accessories...
Customer Q&A
3 questions already asked
Loading...
Loading articles...
This product assembled and installed easily. It works exactly like I expected. I would purchase this product again.
Greg from tulsa, OK