Skip Navigation

Sanus Classic MMT15-B1

Tilting wall mount for TVs 26"-40"

6 Reviews

Item #: 051MMT15

This item is no longer available.

Original Price: $44.99

Shop all TV Wall Mounts

$44.99

Overview

Our take on the Sanus Classic MMT15-B1

The Sanus Classic MMT15-B1 is designed for flat-panel TVs up to 40", and holds your display just 1-7/8" from the wall. This compact mount tilts up or down so you can position your TV to eliminate unwanted glare from windows or other light. And you can slide the mount slightly from side to side for optimal placement, even with off-center studs.

Sanus Classic

The Sanus Classic MMT15-B1 is designed for flat-panel TVs up to 40", and holds your display just 1-7/8" from the wall. This compact mount tilts up or down so you can position your TV to eliminate unwanted glare from windows or other light. And you can slide the mount slightly from side to side for optimal placement, even with off-center studs.

Will this mount work with my TV?
Use the Sanus MountFinder™ to see a list of mounts that work with your specific TV.

Where do I drill the holes?
Tell the Sanus HeightFinder™ Installation Assistant how high you want your TV, and it tells you exactly where to drill.

Very sturdy. Ability to move to the left and right after mounting alowed the perfect positioning.

Ted, Hanilton, NJ

What's in the Box:

  • Wall-mount bracket
  • 2 TV brackets
  • Four M4 x 12mm screws
  • Four M4 x 30mm screws
  • Four M5 x 12mm screws
  • Four M5 x 30mm screws
  • Four M6 x 12mm screws
  • Four M6 x 20mm screws
  • Four M6 x 35mm screws
  • Eight M4/M5 washers
  • Four M6 washers
  • Four M4/M5 spacers
  • Four M6 spacers
  • Three 5/16" x 2.5" lag-bolts
  • 3 Wall-anchors
  • Three 5/16" washers
  • Instructions Manual

Product Highlights:

  • designed for flat-panel LCD TVs 26"-40"
  • accommodates VESA 75, 100, and 200 mounting hole patterns
  • supports up to 80 lbs.
  • holds TV 2-3/8" from wall
  • mounting hardware included
  • tilt range: +15° up to -10° down
  • lateral shifting for optimal placement with off-center studs
  • stud-mounting required
  • 17-1/2"W x 13"H x 2-3/8"D
  • warranty: 2 years
  • Our 60-day money-back guarantee
Reviews

Sanus Classic MMT15-B1 Reviews

Average Customer Review:

6 Reviews

Its... Decent

AP from San Antonio, TX on 5/20/2013

Crutchfield Customer Review (What's this?)

The mount does what it should do, it holds the TV to the wall. However, its not very low profile and it could use some cable management. But the real problem is that the TV basically just clamps on to the bottom of the wall mount and EVERY time you adjust it the TV goes completely and entirely out of level. So every time you adjust it right or left, move or change any cabling, and god forbid you actually want to adjust the TV angle vertically, the TV will go radically out of alignment. If you have the patience to them unmount and re-mount the TV a few more times until it is level again after any time you touch it, this should be no issue.

Pros:

Cons:

Mount

Ted from Hanilton, NJ on 4/15/2013

Crutchfield Customer Review (What's this?)

Very sturdy. Ability to move to the left and right after mounting alowed the perfect positioning.

Pros:

Cons:

Sanus MMT 15-B1

J. Ray from Houston, TX on 2/12/2013

Crutchfield Customer Review (What's this?)

Loved this wall mount tilt bracket. Plenty of holes and hardware for all kinds of mounting options. Also allows TV to slide left or right on the bracket 4 or so inches to make centering on the wall easier. I used it with a 32" Sony LED TV. Straight forward instructions included. No problems here!

Pros:

Cons:

MMT15-B1 Tilt TV Wall Mount

Mike G. from Moline, IL on 11/16/2012

Crutchfield Customer Review (What's this?)

Robust wall mount that has sufficient mounting holes and wall bracket length for me to install my 32" TV centered between two doors. At first I thought there would be a problem with my off-center stud but was able to slide the TV on the bracket with an inch to spare. Virtual axis does allow for easily changing tilt angle and still holds position once set without tightening screw clamps.

Pros: Comes with wide variety of mounting hardware Easy one person install

Cons: Does not come with 8mm hardware

Fantastic TV Mount

Jim M. from Charleston, SC on 5/25/2012

Crutchfield Customer Review (What's this?)

I purchased this TV Mount for the Samsung 32" TV I just purchased from Cruthfield. This will mount a 26" to a 40" TV. This mount has several features I really like. Once mounted to the wall, it will slide to the left or right about 4 to 5." You can tilt the TV approx 15 degrees up or down. And you can place a lock at the bottom of the mount for security. This TV mount is well made, easy installation, & I highly recommend it.

Pros: You can move the TV 15 degrees up or down if needed. Also you can slide the TV side ways approx 5 or inches either way as well. Well maded, & Easy Installation.

Cons: None.

Sanus Classic MMT15-B1 Tilt TV Wall Mount

LouV from Downers Grove, IL on 1/31/2012

Crutchfield Customer Review (What's this?)

Incredibly easy to install. Took about 10 to 15 minutes. Solid construction and ample range to adjust tv position. Also, Crutchfield had the best price by far.

Pros: Easy installation

Cons: None

Details

Hands-on research

Product Research

Overview: The Sanus Classic MMT15-B1 is a tilting wall-mount bracket for small to medium sized flat-panel TVs and monitors.

TV Compatibility: The MMT15-B1 can accommodate TVs and monitors with screen sizes from 26-40", and weighing up to 80 pounds.

Mounting Bolt Hardware/Pattern: 4mm, 5mm, and 6mm hardware is included.  Given the mounting bracket's range of motion, it will accommodate the following mounting bolt patterns:

  • 75 x 75
  • 100 x 100
  • 200 x 100
  • 200 x 200
  • 300 x 200
  • 300 x 300

Note: Additional hardware may be required for your specific model of TV. For example; shorter or longer screws, thicker or slimmer washers or spacers. These additional accessories can often be found at your local hardware store.

Tilt Mechanism: The Sanus Classic MMT15-B1 tilts up & down +/-15°.

Tools Required:

  • Stud finder
  • Punch
  • Level
  • Tape Measure
  • Pencil
  • Phillips-head screwdriver
  • 1/2" (13mm) socket wrench
  • Electric drill
  • Drill bits (7/32" for wood stud, 1/2" for concrete)

Dimensions:

  • Overall: W = 17.5", H = 13.0", D = 2.375"
  • Wall Bracket: W = 15.5", H = 6.0", D = 0.625"
  • TV Brackets (2): W = 2.4375", H = 13.0", D = 2.1875"

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Accessories
Library